BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Very durable and super-comfortable all-round gloves. Seamlessly knitfrom a polyester/cotton blend yarn. Powergrab really lives up to itsname: the glove provides an excellent grip, while it also has a comfortable, supple fit. Highly recommended for warehouse work, handling and various industrial tasks. Also a good choice for use in the building industry!
Lined winter glove with PU palm and waterproof membrane. Back is made of stretchy spandex material in yellow Hi-Vis. Safety cuff. Fully lined with soft fleece material. Sizes 8-12.
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Half nitrile coating on the palm with sand grain finish for extra grip. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.D.P
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The full nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex certified.
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Gloves with extreme cut protection featuring INTERCEPT™ Technology while maintaining enhanced flexibility and tactility. These ultra-lightweight and ultra-thin breathable gloves are touchscreen compatible to ensure that workers do not need to change or remove gloves between tasks High dexterity combined with unmatched comfort and precision while achieving excellent abrasion resistance. Electrostatic dissipative (ESD) protection for electronic components, batteries and other sensitive equipment and parts. Tailored fit at the base of the pinky finger better matches natural hand contours Dermatologically approved by Dermatest®. Antistatic, latex free and washable at 40°C. Sizes: 6-12.
Glove in synthetic leather.Fully lined.Coating PU. Poleyster back. Wind and watertight Firm grip. Sizes : 7-12 EN388:2016 1.1.2.1.X and EN511 X.2.X.
The XA-326 is specifically designed to provide maximum "all-around" performance on slippery grip applications in non-hazardous chemical environments. The 13-gauge seamless wooly nylon liner and "backhand coated style" provide an excellent flexibility, minimizing h and fatigue, thus increasing productivity. A soft yet durable latex coating technology "MicroFinish" adheres to virtually any dry or slippery surface. Sizes: 6(XS)-11(XXL).
Gloves knit from Zirnium® yarn, palm and fingers covered with cowsplit leather, 1.1 mm thick, 25 cm length, seams stitched with Kevlar® fibres.
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Touchscreen function on the forefinger. Sizes: 7-12. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
Felt gloves with heat resistant nitrile coating. Maximum grip, perfect abrasion and cut resistance, insulates to 250 °C. Silicone Free.These gloves are suitable for: handling hot glass, rubber tyres, belts and removal of forms from injection moulding machines, vulcanising, calendering, removing thermoplastics from moulds, handling hot moulded materials, handling hot wooden sheets, removing sterilised products from autoclaves. glass industry, rubber industry. Sizes: 8/9/10. length: 33 cm. In line with: EN388:2016 2.2.4.1.B, EN 407 X.2.X.X.X.X.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Thin airy working or inner glove, tight knit in cotton and spandex. Tight fit. Sizes: 6-10.
Innovative impact protection and cut resistance glove offers protection against liquids combined with superior dexterity for ultimate comfort in a variety of applications. TPR impact protection on top of the hand and along the entire length of the fingers. Patented double coating technology. Full nitrile coating with smooth finish for liquid resistance. Half nitrile palm coating with sand grain finish for extra grip on wet and dry surfaces Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Sizes: 7-13. Complies with: EN388:2016 4.X.4.4.F.P
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
60 cm cut and heat resistant arm protector. Contact heat to 100°C for max . 15 seconds. With thumb hole and Velcro closure on upper arm.
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Level F cut resistance. Protects from glass, blades and abrasions. Protection against contact heat up to 100°C. Crinkle latex grip offers excellent grip. Reinforced thumb crotch for extra protection and durability. Superior strength and comfort. Reflective label for improved visibility .Breathable seamless liner 13 gauge liner for a perfect fit. Sizes 6(XS)-11(XXL). Conform: EN388:2016 3.X.4.4.F, EN407: X.1.X.X.X.X
Cut and heat resistant arm protector 35 cm. Conform: EN388:2016 2.X.4.X.E
•Framing finger config for grasping fasteners •Padded palm with Tena-Grip™ reinforcement •Technical hex-stretch poly knit construction •Neoprene knuckle pad •Low-profile molded hook and loop closure with ID space •Pull-on tab for easy on/off •EN 388: 2016: 3.1.3.2.X •Patent pending
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
Arm protector heat and cut resistant. Length 45 cm.
Cut and heat resistant arm protector 45 cm., with thumb opening. Ergonomic design. Protects for 21 seconds againt 100°C contact heat (test report).
Medium duty glove with TPR impact protection on the upper hand and fingers, TPR design with smooth knuckles and 2 separate fingers. Durable padded red artificial leather palm, with reinforcement around the index finger to protect sensitive areas. The tips of the index, middle finger and thumb are suitable for touch screen work. Good visibility for extra safety. Sizes: 8-13. Conforms to: EN388: 2016 2.1.2.1.X.P
Cut-resistant gloves with Hagane coil liner in combination with the nitrile foam coating on the palm provide a good grip and optimum protection against cutting wounds in both dry and humid environments. Sizes: 6-10.
Cut and heat resistant arm protector 60 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Robust and comfortable sythetic industrial working glove with cut and impact protection. With OT grip technology, and OT 3D impact technology, tested ANSI 138. Thumb and forefinger reinforced, double stitched, precurved fingers, the palm has a striking red color. Easy to put on and take off. Free from Chrome6, latex, silicone and DMF. Completely winter lined. Touchscreen function on the forefinger. Sizes: 7-11. Conform: EN388:2016 3.X.4.2.D.P, EN407: X.1.X.X.X.X, EN511: 1.2.1
Innovative impact and cut protection glove combined with superior dexterity for ultimate comfort in a variety of applications. Breathable knit shell for cut resistance TPR impact protection on top of the hand and over the entire length of the fingers. Nitrile coating on the palm with sand grain finish for extra grip. Fleece lining for extra warmth in cold temperatures. Reinforced thumb hole to reinforce high-wear areas. Highly visible for extra safety. Tips of the index, middle finger and thumb are suitable for touchscreens. Superior grip on wet and dry surfaces. Sizes: 7-13. Complies with: EN388:2016 4.X.4.3.F.P
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The 3/4 nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex Certified.
Medium duty impact glove with slip-on cuff and double-layer palm made of cut-resistant synthetic leather. TPR impact protection with ANSI / ISEA 138 score 2. Reinforcement around the index finger to protect abrasion-sensitive areas. Highly visible for extra safety. Sizes: 6-13. Conforms to: EN388: 2016 3.X.4.3.E.P
Tactial cut protection glove for universal interventions, with excellent dexterity on the 'trigger' finger, touch screen function, padding on the palm, and silicone dots for an excellent grip. With extra choc protection on the back of the hand. Sizes: 6-11.
Glove with impact and cut protection that keeps hands warm and dry. TPR impact protection on top of the hand and over the entire length of the fingers. 70gr Thinsulate™ insulation for extra warmth, the patented waterproof barrier keeps hands dry. Features PVC patches on the palm for extra grip, and an extra layer on the palm provides extra cut resistance. The extended cuff with gaiter closure keeps the dirt out and has reflective bands for extra visibility. The tips of the index, middle finger and thumb are suitable for use with touch screens. Sizes: 8-12. Complies with : EN388:2016 3.X4.4.F.P, EN511:1.2.1
A warm and durable mitten glove in the Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
