BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Long winter cap (shoulder length) in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides. Flame-retardant properties.
Cooling vest based on PCM technology to reduce heat stress and fatigue occur in very hot areas. Provides constant cooling at 3 different temperatures. Exterior: Robust canvas material, polyester mesh lining. 4 pockets for cooling packs. adjustable waist, zipper. Supplied without cooling packs. Available sizes: S-3XL. Available color: black.
Insole which emits heat for 7 hours after packaging is broken. Not PPE.
This PCM CoolOver provides a constant cooling temperature of 21°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Cooling Towel: Dampen this synthetic chamois to create a cooling aid significantly colder than ambient air. Advanced PVA material holds water without feeling heavy. Super-evaporative, feels significantly cooler than ambient air.
The Chill-Its 6670CT Evaporative Cooling Hard Hat Neck Shade straps into hard hats to deliver four hours of cooling relief while also shading the neck from sun damage. The lightweight shade features advanced PVA cooling technology for instant cooling without bulk or slime, with a wide panel that extends down for complete back-of-neck-coverage. This hard hat neck shade fits most hard hats and safety helmets, easily and securely attaching to the suspension with two hook <(>&<)> loop straps.
Heating kit that provides heat for 10 hours after packaging is broken. To be used in combination with helmet caps; These warmers can also be used in gloves.
"Ice" at a constant temperature of 15˚C. These extra cold 15˚C cool packs are mainly used for pre-post cooling of athletes and to cool down after an injury or after medical treatment. Or for someone who just really likes a low temperature cooling on the body. th only REACH registered and USDA certified 100% bio PCM on the market!
This PCM CoolOver provides a constant cooling temperature of 24°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
Short winter cap in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides.
Set of 4 cooling packs with a constant temperature of 21 °C. These 100% biobased INUTEQ‑PAC® PCM packs perform reliably under any extreme temperature and at any humidity level. For the Bodycool Pro cooling vest (1052092).
Evaporative Hard Hat pad with cooling towel.Advanced PVA material activates easily and quickly when run under water for one minute.Hook and loop closures connect to hard hat suspension system.Conveniently attaches to hard hat suspension headband .Reusable, just re-wet. No PPE.
This PCM CoolOver provides a constant cooling temperature of 29°C and reliable protection against heat stress for professionals who need advanced cooling under protective clothing in extreme heat.
This PCM CoolOver provides a constant cooling temperature of 15°C. The CoolOver is specially designed to improve performance and speed up recovery after exercise.
Evaporative Cooling Vest: Soak in cold water, and enjoy cooling relief and comfort. With V-neck with zipper closure, nylon outer layer, polymer-embedded fabric inside, water-repellent liner and black cotton- poly elastic trim. Washable.
This PCM CoolOver provides a constant cooling temperature of 6.5°C. The CoolOver is specially designed to improve performance and speed up recovery after exertion.
The Bodycool Xtreme cooling vest is a lightweight design made to be worn snugly around the body. It generates a cooling effect lasting 1 to 4 hours, depending on the ambient temperature, airflow, and humidity.
The allround Bodycool Pro Neoprene cooling vest provides constant cooling and ultimate protection against heat stress for professionals working in extreme heat, especially when they need to wear protective, air-tight clothing. One size. Note: INUTEQ-PAC® bio-based PCM cooling inserts must be ordered separately. (15°C: 1063843, 21°C: 1063844, 24°C: 1063845, 29°C: 1063846)
Lightweight cooling vest without cooling packs, they must be purchased separately (item 1059946).
Set of 4 cooling packs at a constant temperature of 24˚C. These 100% biobased INUTEQ-PAC® PCM packs perform under any extreme temperature and at every level of humidity. For the Bodycool Pro cooling vest (1052092).
Flip-Top winter gloves with optimal dexterity with removable fingertips.
Set of 4 cooling packs at a constant temperature of 29˚C. These 100% biobased INUTEQ-PAC® PCM packs perform under any extreme temperature and at every level of humidity. For the Bodycool Pro cooling vest (1052092).
Chill-Its 6689 Cooling Long Sleeve Sun Shirt with UV Protection. Available sizes: S - 3XL Available colours: Blue, lime
"Ice" on a constant temperature of 15°C. For when exact temperatures are of the essence. These 100% biobased INUTEQ-PAC® PCM pacs perform under any extreme temperature and under every level of humidity. Voor koelvest Bodycool Pro Neoprene (1063839).
Cooling packs for cooling vest 1059945.
Evaporative Cooling Bandana: Activated polymers bring cooling power. With knod closure.
"Ice" on a constant temperature of 21°C. For when exact temperatures are of the essence. These 100% biobased INUTEQ-PAC® PCM pacs perform under any extreme temperature and under every level of humidity. Voor koelvest Bodycool Pro Neoprene (1063839).
"Ice" on a constant temperature of 29°C. For when exact temperatures are of the essence. These 100% biobased INUTEQ-PAC® PCM pacs perform under any extreme temperature and under every level of humidity. Voor koelvest Bodycool Pro Neoprene (1063839).
2-Layer FR Hook <(>&<)> Loop Mouth Piece: Adjustable face protection that fits perfectly with an FR winter liner.
2-LAYER THERMAL MOUTHPIECE – Attaches to all N-Ferno® Winter Liners (sold separately) with hook and loop attachment straps for full-face coverage. WATER-RESISTANT OUTER SHELL – Breathable 1mm neoprene construction to trap heat in. WARM LINING – Soft fleece for additional comfort Machine Washable.
Evaporative Cooling Bandana: Activated polymers bring cooling power. With hook and loop closure.
"Ice" on a constant temperature of 24°C. For when exact temperatures are of the essence. These 100% biobased INUTEQ-PAC® PCM pacs perform under any extreme temperature and under every level of humidity. Voor koelvest Bodycool Pro Neoprene (1063839).
The hydration backpack 5160 is the ideal solution for your personal water supply. This insulated backpack is equipped with a patented drinking tube.
