Face shield in clear polycarbonate, length 200 mm. For use on EVO safety helmets. Marking: 1 B 3 9.

Face shield in clear acetate, length 200 mm. For use on EVO safety helmets. Marking: 1 F 3.

Face shield in clear polycarbonate, length 175 mm. For use on EVO safety helmets. Marking: 1 B 3 9.

Face shield in clear acetate, length 175 mm. For use on EVO safety helmets. Marking: 1 F 3.

Chin piece S91C, suitable for attachment to face shield Surefit 175mm PC (1055809) and CA (1055811).

Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9.

Face shield in clear polycarbonate, length 185 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.

Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.

Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 8-1-0 9 KN.

Face shield in black woven nylon mesh with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 65%.

Face shield in black woven stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 70%.

Face shield in black etched stainless steel with matt surface. Very light and non-conductive material. Compatible with EVO helmets. Light reduction: 80%.

The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can offer the face shields C1 (185m polycarbonate) / C2 (185mm polycarbonate anti-fog <(>&<)> anti-scratch) / C4 MAX (215mm polycarbonate anti-fog <(>&<)> anti-scratch) / C5 MAX (215mm polycarbonate anti-fog <(>&<)> anti-scratch). scratch + arc flash).

The Browguard with rotary knob allows you to mount a wide range of face shields. For example, we can mount the face shields M1 (nylon wire mesh) / M2 (woven stainless steel) / M3 (etched stainless steel).

Face shield in grey polycarbonate, length 340mm. For use on EVO5 safety helmets. Marking: 1 B 8-2-2.

Universal aluminium helmet attachment system for a wide range of safety helmets. Super-lightweight and hinged. For use with Fitt All visors.

Heat resistant, 1.5 mm thick visor made of polycarbonate. (Width 450 mm, hight 250 mm) Fits Monteclipso Elect frame and is approved as a whole for attachment to helmets for electrical work.

Universal face shield with anti-fog feature (1,15 mm) in acetate (chemical resistant). With a chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso. general industrial applications.

Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.

Lightweight and very comfortable face shield, 450 x 200 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact.

Lightweight and very comfortable face shield, widht: 450 mm x hight: 250 mm. With individually adjustable headband and forehead protection. Cellulose acetate visor: scratch and chemical resistant, but is not suitable for use at high temperatures or as protection against high impact.

Universal anti-fog visor made of cellulose acetate. Shape 1: width 450 mm, height 200 mm and thickness 1.15 mm. For mounting on Lunar and Monteclipso.

Universal anti-fog visor (1.15 mm) made of cellulose acetate. Shape 2: width 450 mm, height 250 mm. For mounting on Lunar and Monteclipso.

Helmet attachment system made of plastic, for use with all Fitt All Elect visors. Entirely metal-free, for use in electrical installations.

Synthetic lightweight headband for use with all Fitt All visors. The Lunar headband has an exceptionally comfortable fit and can be worn for lengthy periods without difficulty.

Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.

Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C.

Lightweight and very comfortable faceshield,450 x 250 mm. With individually adjustable headband and foreheadprotection. Polycarbonate visor: good impact resistance, heat resistant up to 130 degrees C.

Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Fitted with chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.

Clear faceshield 5F-11 provides increased protection against high speed particles (120m/s).Compatible with the 3M™ V5 Face Shield System for mounting on a 3M™ G3000, G500 or G22 Series Safety Helmet. In accordance with: EN 166

Gold/Green visor. Compatible with the G3501 High Heat helmet.

PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR, B-S-WR and pheos alpine (+adapter) and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.

PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.

PC visor in clear polycarbonate, mechanical side arms. Compatible with the Uvex pheos helmets with short peak E-S-WR and compatible with the K2H earmuffs. With uvex supravision excellence coating technology: anti-fog on the inside and anti-scratch an chemical resistant on the outside. The visor is easy to clean thanks to nanotechnology.

Visor made out of PET with anti-fog coating with elastic strap. Dimensions: 22x33cm. This face shield protects against drops and spl ashes of liquids. Thus, it reduces the risk of a droplet infection. Due to its design, complete protection against viruses, bacteria or other biological agents is only given to a limited extent. Can be combined with face protection masks.

Face shield Acetate Antifog for use with face shield holder S89 or helmet face shield holder S54 CE, made of acetate.

Face shield in clear polycarbonate, length 225 mm. Is compatible with S89 (1000806) and S89SR (1048119). For use in combination with helmet holder S54B/S54CE (1000790/1000789) and adapter 3711/S565 (100 1188/1001191) for mounting on Centurion safety helmets. Bracket S54, which you can see on the photo isn't included. Marking: 1 B 9 3.

Cellulose acetate shield, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Packaged per 10 pieces. Marking: EN 166 1 F 9 3.

The Browguard with slip ratchet can be used to hold a wide range of face shields. Compatible face shields include the S580 (170 mm polycarbonate) / S590 (225 mm polycarbonate) / S591 (225 mm acetate) / S592 (225 mm acetate anti-fog) / S592AEA (225 mm acetate anti-fog <(>&<)> anti-arc) / S593 (225 mm green acetate). You can also choose from face shields S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate anti-fog) which are suitable for attachment of an optional chin piece (S91C) to protect the entire face.

Facial screen carrier Arc Pro for helmets, in polyetherimide, to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. Complete with Euro clips (S565) and Connect clips (S570) with Vabon sweatband. This system is fully tested to protect up to 40cal/cm2.

Chin piece S91C, suitable for attachment to face shield S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate a nti-fog).

Screen carrier S54CE Centurion for attachment to Centurion face shields and safety helmets. This screen carrier includes CONNECT & 3 0 mm ADAPTER for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARIN G PROTECTION BALTIC SNR25 & HELMET HEARING PROTECTION SNR30).

Screen carrier S54B Centurion for attachment of Centurion face shields to safety helmets. This screen carrier can be attached direct ly to the 30 mm slot on the helmet using adapter BILSOM 3712 (not included). With the addition of a BILSOM hearing protector, a comb ination head-hearing-face protector can be created.

Screen carrier made of heat resistant plastic, type S57. Protects against arc flash. Suitable for attachment of face shields s59/s60 3/s605/s613/s615/s760.

Screen carrier made of heat resistant plastic, type S57. Suitable for attachment of face shields s59/s603/s605/s613/s615/s760. This screen carrier can be attached directly to the 30 mm slot on the helmet using adapter BILSOM 3712 (not included). With the addition of a BILSOM hearing protector, a combination head-hearing-face protector can be created.

Cellulose acetate shield, anti-fog coating, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Marking: EN 166 1 F 9 3 and EN 170 2-1.2.

Face shield Acetate Clear for use with face shield holder S89 or helmet face shield holder S54 CE, made of acetate.

Clear tri-acetate face shield (225 mm). Suitable for use on the Centurion Vulcan using the optional, ingeniously devised, multi-func tional face shield holder S57.

Face shield Centurion S760: 225 mm gold metallised, In line with EN 166 (1FT93), EN 171 (4-5).

Face shield (wire mesh shield) S59CEV for use with Centurion helmets (except for the Spartan). The shield includes three adapters: C for English connection slot, E for European 30 mm slot and V for Vision.

Face shield in clear polycarbonate for use with face shield holder S89 or helmet face shield holder S54 CE.

Face shield in clear polycarbonate for use with face shield holder S89SR or helmet face shield holder S54 CE.

Face screen in blank polycarbonate, thickness: 1,5mmm, lenght 225mm. Possible combination with the Anti Electric Arc Browguard S89CAEA (1014252) or the face screen carrier S57CEAEA (1014320). Packaging: 10 pieces.

Face screen in blank polycarbonate, thickness: 1,5mmm, lenght 170mm. Possible combination with the Anti Electric Arc Browguard S89CAEA or the face screen carrier S57CEAEA and Chin guard S91C. Packaging: 10 pieces.

Adapter for helmet, suitable for acetate and polycarbonate visors of Centurion. Not approved as PPE.

Screen carrier S55 Centurion for attachment to Contour face shields. This screen carrier includes Contour 30 mm adaptor for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARING PROTECTION Scala SNR25 <(>&<)> HELMET HEARING PROTECTION Scala XI SNR30).

Face shield in clear polycarbonate, length 230 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 8 9.

Face shield in clear polycarbonate, length 200 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 9.

Face shield in light green polycarbonate, length 235 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 B 3 8 9.

Face shield in clear-grey polycarbonate, length 235 mm. This screen uses the latest arc flash nanotechnology. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 B 3 8 9.

Browguard with slip ratchet in polycarbonate Arc Pro to use in combination with the visors 225mm and 170mm for arc flash risks posed by electrical faults. This system is fully tested to protect up to 40cal/cm2.

Chincup for V-Gard 900.

Visor in clear PC for V-GARD 950. Marking: 1 B 8-1-0 9 K N.

The 3M™ V5 Face Shield System is designed for best compability with the 3M™ G3000 and G22 Safety helmets, 3M™ V6 integrated eyewear, 3M™ PELTOR™ Ear muffs and Communication headsets. The V5 Face Shields also provide improved protection against high speed particles, both from the front and the sides.

Face shield in black steel mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet.

Face shield in black polyamide mesh with matt surface. Very light and non-conductive material. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet.

Face shield in black etched metal mesh. Designed for use with V5 visorsystem for attachment on 3M™ G3000 of G22 Series helmet. Ideal for forestry.

Headgear combination, including a clear polycarbonate face shield 5F-11 and earmuff Optime I. It provides a versitale and comfortable solution for wearers who require both face and hearing protection. Easy to combine withother 3M safety products such as face shields, passive earmuffs or communication headsets and integrated eyewear. Sizes: 54-62 cm. It provides good impact protection in combination with a wide field of view and high end user comfort.

The 3M ™ Face Shield Holder U5B-CE replaces worn or damaged parts and is designed to be mounted on a variety of 3M ™ face shields for the 3M ™ SecureFit ™ X5000 and X5500 Series Safety Helmets.

Screen carrier helmet in aluminium. Foldable and with a good positioning. Extra seal for protection against dust. In accordance with: EN 166/ EN 167/ EN 168/ EN 170.

Frame for Bochumerscreen. 60 x 120 MM

Visor in polycarbonate, gold coated and foreseen with adapter for face screen carrier (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from -50°C to +135°C. Dimensions: 500x250x1mm.