ABS safety helmet with flip-down, panoramic safety glasses with polycarbonate lenses. Can be worn with corrective glasses. Size: 49-63 cm, adjustable with a ratchet. Available in: white, yellow, blue, red, green.

State of the art safety helmet, made of PE. With well made and extremely comfortable 6-point textile suspension and durable ratchet adjustment (51-63 cm), height adjustable at both front and rear (3 positions each), with soft, black nylon sweatband. European 30 mm slot for wide range of hearing and face protection accessories. Approved for extreme cold (down to -40 °C) as well as for electrical work to 440 VAC.

General purpose safety helmet with a 6 point plastic cradle. Full Peak (40 mm), Slip, Non-Vented, with Brushed Nylon Sweatband, with Combi Slot. Weight: 377gm. Size: 51 - 63cm. Materials: Shell: HDPE (High Density Polyethylene). Cradle: 6 Point LDPE (Low Density Polyethylene). Headband: LDPE (Low Density Polyethylene). EN 397:2012 + A1:2012. - 10°C (Low Temperature). Molten Metal (MM). 440V a.c. (Electrical Resistance).

Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (52-63 cm) and Drytech sweatband. Adjustment is made quickly and easily with convenient ratchet. With extended neck protection, indirect ventilation for closure of the ventilation holes. With convenient surface for personalisation. With Combi slot for attachment of hearing and face protection.

Light (340 g) safety helmet made of polyethylene with mid peak (neither short nor normal length). Quality and comfort are guaranteed due to theimproved, permanently attached 6-point textile suspension with ratchet(53-64 cm), fitted with a highly absorbent sweatband, made of 2mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi- slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter. The production date is printed on the right top above the peak in the base of the neck protection.

Comfortable helmet for work and interventions at height and difficult to reach locations. Is fitted with extra-sturdy chin strap closure so the helmet remains in place during a fall. This helmet has no obstructive sun visor, which would obstruct sight while climbing on constructions and manoeuvring through small spaces. Made of indestructible, durable,lightweight polycarbonate. High energy absorbing capacity upon impactduring a fall, both on the top and side of the shell. Equipped with attachment points for helmet mounted light as well as face and hearing protection. Lifetime: 10 years. Universal size, range 53 to 63 cm.Weight: 465 g. Available in: yellow.

Super-light (300 g) safety helmet made of strong ABS. With 6-pointtextile suspension (52-64cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.

Heat resistant safety helmet made of fibreglass reinforced polyester. The high-quality helmet maintains its shape to 500 °C and has a 6-point textile suspension, leather sweatband and wheel ratchet. Available in: white, yellow, blue, red, green, orange.

IDRA 2 ABS safety helmet with integrated flip-up face shield (330x200mm/ 2.2 mm thick) made of polycarbonate, specially approved for short- circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (49-63 mm) with ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected particles, from grinders for example.

Super lightweight, perfectly balanced safety helmet in strong ABS, ventilated. With 6-point textile interior (52-64cm) and highly absorbent hydro-flock sweatband. Very large surface area for personalisation. With a rain channel and unique drainage system. With European 30mm slot for attachment of hearing and face protection. With retractable glasses, impact B (!), suitable for wearing with prescription glasses. These glasses have a soft adjustable nose-bridge and can easily be replaced. Manufacturing date is noted near the glasses in the black plastic. Accessories: badge holder, bulb holder, reflective strips, replacement glasses. Colours: white, yellow, blue, red, green, orange, black.

Safety helmet made of polyethylene with 6-point textile suspension (51-63 cm) and black nylon sweatband, without ventilation. With European 30 mm slot for attachment of hearing and face protection.

Light safety helmet made of ABS and fitted with 6-point textile suspension (52-64cm) and Hydroflock sweatband. Includes European 30mm accessory slot for face protection. Has a raingutter and integrated spectacle. Electrically insulating in accordance with EN50365 for live- working in low voltage environments. Colors: White, Yellow, Green, Orange, Red, Black, Grey and Blue.

Safety helmet with integrated face shield (class 1) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (51-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Can be fitted with flip-up safety glasses (to order separately: 1000242).

Comfortable, universally usable safety helmet made of polyethylene with 6-point textile suspension and leather sweatband. With rain gutter, variable ventilation and extended neck protection. Available in: white, yellow, blue, red, green, orange. This helmet is also known under the name BER I/79G-R.

Safety helmet in Phenol, resistant to extreme heat, molten metal parts and sideways slant. Resistant to chemicals. Cradle with linen bands for increased comfort. Sweatband all around the helmet in full grain leather. Sizes 53-61 cm. Weight: 400g.

4-point textile chinstrap, compatible with V-Gard and ThermalGard.

Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is not required. The chinstrap incorporates a quick release buckle. Removable harness also fits all other Centurion helmets. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.

Safety helmet made of polyester resin with fibreglass reinforcement. Lightweight: +/- 370 g. Heat resistant to +/- 400 °C. textile h eadband. Plastic sweatband at front. Colours: white and yellow. Headband adjustable with ratchet.

Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-63 cm) and highly absorbent hydro-flock sw eatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Colours: white, yellow, blue, red, green, orange.

Super-light safety helmet with micro peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.

Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.

Heat resistant (to 500 °C) safety helmet made of fibreglass reinforced polyester and fitted with 6-point textile suspension (51-63 cm) and black nylon sweatband. Weighs just 370 g and includes English accessory slot for face protection. With optional multifunctional face protection holder S57 for wide range of face shields.

Polyamide safety helmet with integrated flip-up face shield (310 x 170 mm / 1.7 mm thick) made of polycarbonate, specially approved for short-circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (53-63 mm) w ith ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected parti cles, from grinders for example.

Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent PVC sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.

Safety helmet made out of ABS with wheel ratchet, short peak and 6-point cradle out of textile (52-63cm) with a strong absortbant Hydro-Flock sweatband. Has an integrated visor with anti-scratch and anti-fog coating. Colors: white, yellow, blue, red, green, orange, black.

Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.

Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and suspension with wheel adjustment. Helmet with slot for P3E or P3K adapter. Tested: molten splash metal (MM) and low temperature (-30°C).

Suspension I/79GD-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ben and Bop. Not separately certified as PPE.

This new patented Dry Cooling technology, in partnership with Inuteq B.V, is designed to provide enhanced cooling comfort for the wearer. This revolutionary technology is activated with a small amount of water and re-activation is only required every 1-3 days depending on the environment, humidity and airflow.

Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.

Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, green, blue, red, orange.

Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with wheel ratchet. Has a Chamlon sweatband.

Comfortable, universally usable vented safety helmet, made of polyethylene, with 6-point plastic suspension. With rain channel, Euro pean 30 mm slot for attachment of hearing protection. Available in: white, yellow, blue, red and orange.

Safety helmet with slide adjustment, short peak, made of strong ABS, with 6-point textile interior (51-63cm) and highly absorbent hydro-flock sweatband. Non-ventilated. With European 30mm slot for attachment of hearing and face protection. With UPDATED built-in face shield that easily slides over glasses. Mark A, optical class 1, with easy to operate side-pieces. Anti-scratch and anti-vapour coating. Colours: white, yellow, blue, red, green, orange, black.

4-point chin strap for helmets EVOlite®, EVO® 2/3/4/5/8. Meets the requirements of EN 397 and EN 14052 when worn with the appropriate JSP EVO® helmet.

Safety helmet made of ABS, fitted with a 4-point textile suspension with
slip adjustment and leather sweatband. Vented version. Includes European 30mm accessory slot for the V5C face screen and H31 ear protection. This helmet contains the forestry quality label KWF (printed on the helmet). Sizes: 53-62cm.

Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with full peak, leather sweatband and a G2D suspension with slip adjustment (54-62cm). Vented helmet with slot for P3E adapter. Tested: lateral deformation (LD), molten splash metal (MM) and low temperature (-30°C).

Super-light (300 g) ventilated safety helmet made of strong ABS. With 6- pointtextile suspension (52-63 cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.

Safety helmet made out of PE. Has a 6-point polyethylene cradle (53-63cm). Available in: white, yellow, blue, green, red, orange. Su itable for: general industrial applications.

Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.

Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue.

Light (340 g) safety helmet made of polyethylene with medium-length peak (neither short nor normal length). Quality and comfort are guaranteed due to the improved, permanently attached 6-point textile suspension with slide adjustment (51-63 cm), fitted with a highly absorbent sweatband, made of 2 mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi-slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter.

Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of <(><<)>50%. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection. ATPV: 36cal/cm². Colours: white, yellow, red and blue.

Super-light safety helmet for working at height, with short peak, made
of strong ABS for improved low temperature (-40°) and side impact
protection. With 6-point textile suspension (52-63 cm) and sweatband.
Additional 4-point chinstrap harness, ideal for work at height when
EN12492 standard is required. Optimised micro peak providing maximum
upward visibility without compromising safety. Adjustment is made
quickly and easily with convenient Twist2fit-ratchet. With extended neck
protection and innovative ventilation system for improved airflow and
wearer comfort. With convenient surface for personalisation. With
European 30 mm slot for attachment of hearing and face protection.

industry, contractors and installation companies. Colours: white, grey, blue, light blue, green, yellow, yellow HiViz, orange, orange HiViz, red, black.

Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.

Safety helmet in a UV resistant ABS, vented and fitted with a textile pinlock suspension (54-62cm) and leather sweatband. This material isextremely strong and stable as well as extremely lightweight. G22D is therefore also the lightest in its class (just 315 g)! Extra resistant to ultraviolet sunlight, which also makes this helmet much more durable.This helmet includes a European 30 mm slot for easy attachment ofhearing protectors. Thanks to the Peltor P3EV/2 adaptor it is alsopossible to use hearing protection (Optime ear muffs) and face protection at the same time (in one slot).

High heat resistant safety helmet made of fiberglass reinforced nylon and fitted with 4-point textile suspension (53-62cm) and synthetic sweatband. Includes European 30mm accessory slot for face protection. Compatible with a wide range of safety products and metal-working accessories to provide the complete solution for your application. Electrically insulating in accordance with EN50365 for live-working in low voltage environments. Approved for use at temperatures ranging from -30°C to +150°C. Sizes: 53-62cm. Available in a range of 6 colors for branding and identification purposes. Colors: White, Yellow, Green, Orange, Red and Blue.

2-point textile chinstrap, compatible with V-Gard helmets.

Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.

Kit for helmet with Contour screen in grey high transparency tint, Contour carrier and chin-guard. Uses nano-particles to protect against mechanical, heat, and radiation risks in the event of arc due to electrical errors.

Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent textile sweatband. Vented. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.

Safety helmet with integrated eye protection made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue

Safety helmet made out of PE with full peak. Has a 6-point textile cradle (53-64cm) with slip ratchet. Has a Chamlon sweatband.

The new lightweight uvex pheos planet safety helmet is made of 30% biobased material and retains its shape even under lateral pressure – and meets the safety requirements in the construction and industrial sector. 6-point textile harness with rotary knob, the headband is made from 50% recycled helmet shells. Thanks to the efficient accessory system, the helmet can be quickly and easily adapted to individual needs, such as attaching uvex pheos earmuffs, helmet-mounted lamp or visor. Head circumference : 52-61 cm. PCF (Product Carbon Footprint) = 2 ,0kg CO².

Safety helmet made of ABS, fitted with a 4-point textile suspension with slip adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.

Suspension I/79G-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ber. Not separately certified as PPE.

Chin strap made of cuir. This model is supple and suitable for Centurion Spartan, 1100, 1125, Concept.

The uvex Spiderneck neck support improves the weight distribution of the helmet due to the large contact area, which increases wearing comfort. In addition, mounting is very easy by screwing via the rotary knob. No PPE.

Safety helmet made out of ABS with integrated visor. Has a 6-point textile cradle (53-64cm). Available in: white.

Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

4-points chinstrap for Pheos helmet. No PPE.

Safety helmet made out of ABS with integrated visor. Has a 6-point textile cradle (53-64cm). Available in: white.

Safety helmet with integrated eye protection made of ABS with grey reflective stickers. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

Safety helmet with integrated face shield (class 1) made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.

Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. 4-points chinstrap with selectionsystem to switch between EN397 or EN12492. Helmet with 30mm slott. With reflective striping.

Safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. Helmet with 30mm slott.

Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and 6-points suspension with wheel adjustment. 4-points chinstrap with selectionsystem to switch between EN397 or EN12492. Helmet with 30mm slott.