Motor unit for respiratory protection
34 products found
Brand: 3M
Prod. No. 1032511
Brand: 3M
Prod. No. 1016798
Brand: 3M
Prod. No. 1016810
Brand: 3M
Prod. No. 1032490
Brand: 3M
Prod. No. 1042609
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Brand: SPEEDGLAS
Prod. No. 1022906
Brand: 3M
Prod. No. 1042607
Brand: SPEEDGLAS
Prod. No. 1045291
Brand: SPEEDGLAS
Prod. No. 1053740
Brand: SUNDSTRÖM
Prod. No. 1047207
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Brand: SPEEDGLAS
Prod. No. 1036499
Brand: RESPIREX
Prod. No. 1058172
Brand: SPEEDGLAS
Prod. No. 1014682
Brand: SUNDSTRÖM
Prod. No. 1039329
Intrinsially safe motorunit specially designed to be used in potential explosive atmospher, to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Comes with: motorunit, battery, charger ,belt, filter adaptors for P3 filters, set P3 filters, 10 pre filters, filter cover caps, tube vaseline, and flow meter.Not for confined spaces. Flow rate: min. 175 or 225 L/min. .Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Brand: SPEEDGLAS
Prod. No. 1051758
Brand: CLEANSPACE
Prod. No. 1061086
Brand: 3M
Prod. No. 1002368
Brand: CLEANSPACE
Prod. No. 1059624
Brand: SPEEDGLAS
Prod. No. 1060339
Brand: SUNDSTRÖM
Prod. No. 1062379
Complete kit with SR 500 fan unit and protective helmet SR 575 with polycarbonate visor. Contains, SR 500 fan unit, SR 580 helmet, battery STD, battery charger SR 513, belt SR 508, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 prefilter, 2 pcs prefilter holder, flow meter, plug kit, cleaning tissue and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: 500.
Brand: RPB SAFETY
Prod. No. 1052861
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, cover for gas filter, flow meter, battery and charger and a pack of prefilters. NPF: Depends on hood used.
Brand: SPEEDGLAS
Prod. No. 1060342
Brand: SPEEDGLAS
Prod. No. 1032063
Brand: SPEEDGLAS
Prod. No. 1059267
Brand: SPEEDGLAS
Prod. No. 1043985
Brand: CLEANSPACE
Prod. No. 1063468
Brand: RPB SAFETY
Prod. No. 1052859
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
Brand: 3M
Prod. No. 1066181
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, M-206 hood, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(><)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Brand: CLEANSPACE
Prod. No. 1065157
Brand: SUNDSTRÖM
Prod. No. 1059429
Brand: RSG SAFETY
Prod. No. 1035030
Brand: RPB SAFETY
Prod. No. 1052860
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters and designed for welding applications. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, 2 inch FR belt, spark arrestor, flow meter, battery and charger, P filter and pack of prefilters. NPF: Depends on hood used.
Brand: SPEEDGLAS
Prod. No. 1036085
Brand: SPEEDGLAS
Prod. No. 1063732
