MOTORUNIT SR700

Brand : SUNDSTRÖM
Prod. No. 1059429

Motor unit can only be combined with dust filters SR510 or SR710 (P3 filters) and air hoods and half and full face masks from Sundström. Flow rate: 175 or 225 L/min. Equipped with visual and audible alarm in case of dust filter saturation or low battery. Includes: motor unit, belt, charger, battery,2 filteradapters, 2x P3 filters, 2 pre-filter holders, 10 pre-filters, flow meter. Battery charging time: 0-80% capacity in 30min. battery autonomy depending on filter and set air flow 4-7 hours. NPF: depending on the cap used.

Quantity
Price/pieces: € 964.00

Contact us:

Vandeputte Safety
Here's how to choose your ideal maintenance partner: 5 points for consideration

Here's how to choose your ideal maintenance partner: 5 points for consideration

24-08-2023
Choose the ideal maintenance partner for your PPE! Discover five key points to consider when looking for quality maintenance.
How to protect yourself when handling silicon?

How to protect yourself when handling silicon?

01-09-2023
Find out about the hazards involved in handling silicon and the essential role of breathing protection to prevent silicosis.

Details

  • Brand
    SUNDSTRÖM
  • UNSPSC
    46180000
  • Catalogues
  • Blower unit
    • Yes
  • Dust protection
    • Yes
  • NPF
    • 500
    • 2.000
  • EN 12941
  • EN 12942

Product numbers

Prod. No. Name
1059429 MOTORUNIT SR700

Respiratory protection

Gases, toxic fumes, oxygen deficiency, dust particles, and mists are not always immediately detectable, although they can be life-threatening. Therefore, it is very important to get advice from an expert when you suspect that there may be a risk to the respiratory tract.

This risk, together with the work to be carried out, will determine whether you can work with environment-dependent respiratory protection such as dust masks or half and full-face masks, motor units, etc.

When it is not possible to filter the air present, it is better to opt for environmental-independent breathing protection.  These can be air caps or masks that are connected to the compressed air network. When you need to be sufficiently mobile, it is better to opt for a self-contained system such as a compressed air device or an escape mask.

It is also important to know in advance which substance to ‘filter out’ and how much of it.
If that is the case, calculate the Nominal Protection Factor (NPF) and use it to select the right mask with filter.  Don’t know which it is in advance? Then you’ll need to opt for the ‘ABEK’ filters.

You will find all leading brands in our range: MSA, 3M, Moldex, Bartels, PureFlo, Honeywell, Genano, Scott, Avon, Spasciani, rsg safety, etc.

Did you find the right product?  Then it’s important to check that it fits your face. We do this at Vandeputte by means of a Fit test.

Lastly, you can also contact us for the periodic maintenance of your respiratory protection: refilling compressed air bottles, cleaning and maintaining full-face masks, maintaining and repairing lung vents and breathing apparatus, etc.

.