Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.

Disposable coverall in polypropylene SMS with hood and two-way zip with zip flap. Model for general purpose applications. Three-thread overlocked seams and elastic hood, waist, ankles and wrists. Available in white and blue. Type 5-6.

Coverall, Tyvek®, breathable, antistatic, limited chemical resistant to water-based products, does not pill, stitched seams at outside, new improved hood with elastic, elastic at wrists (new design) and ankles, zip closure under flap.

Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model wi thstitched and taped seams, two times zipper under flap, with hood andelastic at the wrists and ankles, reinforcement at the knees. Suitablefor: chemical and petrochemical industries, pharmaceutical industry, waste collection and processing, tank cleaning, emergency response services, all activities involving risk of contamination with less aggressive chemicals. Sizes: S - XXXL.

Coverall, polymer coating, stitched sealed seams, zipper under double adhesive cover, elastic at wrists and ankles, elastic in the waist, fixed hood (also with elastic), thumb loops. Recommended for treatment of chemicals, 100% particle tight, resistant to splashes of hazardous liquids (up to 2 bar). Available in: yellow.

Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.

Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.

Charlotte clip, polypropylene, latex free, diametre 53 cm, 10gr. / M², elastic closure, Available in: blue, green, white, red. No PPE.

Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.

Overshoes, Micromax, elastic, PVC non-slip sole. Suitable for : agricultural and food industry. Colours: white. Sizes: XL= 41cm.

Blue overall polyethylene film having a thickness of 50 microns. The coverall has a fixed hood, back ventilation and elastic in the waist, the wrists and ankles.

White laboratory jacket with zipper, made of polypropylene (40 g/m²). Without hood or pockets. Available in: white. Sizes: M - XXL.

Coverall with hood. Stitched and over-taped seams. Thumb loops. Elastication at wrists, ankles and face. Elasticated waist (glued-in). Tyvek® zipper. Self-adhesive zipper and chin flap. White with bright orange tapes. Antistatic (inside). Additional taping of cuffs, ankles, hood and zipper flap required to achieve Type 3 liquid tightness

Coverall, 63gr./m², microporous fim laminated, good moisture vapour transmission, three-piece hood, antistatic, elastic at hood, elastic at wrists, elastic at ankles, elastic at waist, zip closure under flap, 3- threads overlock and taped, breathable back in Safegard blue. Available in: white.

Lab coat, Tyvek ®, 41gr. / M², anti-static treatment, inside seams, zipclosure, 2 patched pockets, collar. Available in: white.

Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.

White laboratory jacket with press-studs, made of polypropylene (40 g/m²). Without hood or pockets. Available in: white. Suitable fo r: agricultural and food industry. Sizes: M-XXL. Compliant with: PPE category 1.

Beard mask, polypropylene, latex free, fitted with one elastic. Available in: white. Applications: agro-food industry, hygiene, transport, services. Pack of 100 pieces. Weight: 10g/m². No PPE.

Hairnet in polypropylene, round with elastic seam, packed per 100 pieces. Available in: white, blue.

Sleeve, Tyvek®, length 50cm., adaptable for shorter arms. Available in: white. Sizes: universal size.

Overshoes, polyethylene (30 micron) measurement: 41cm x 15 cm. Thickness: 30 micron. Available in: blue.

Coverall, polypropylene, 50 gr./m², hood with elastic, zip closure under flap, elastic at wrists and ankles. Available in: white, blue. Sizes: L- XXL.

Coverall, laminated, white, chemical overall for limited use, with a Saranex 23P barrier film. Protects against hazardous chemical spattersand sprays. Model with stitched and taped seams, two times zipper underflap, with hood and elastic at the wrists and ankles, reinforcement onthe knees.

Overshoes, CPE, heavy version (90 micron, one size. Available in: blue. Package containing 50 pieces. No PPE.

Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.

Apron, Tyvek, antistatic, with chestpiece, two cords on the back to fasten, length 108 cm. Available color: white. Sizes: universal size.

Overshoe in PolyPropylene in white. Seamless at the bottom of the overshoe to prevent wear and tear. Dimensions: 42x15cm, fabric weight: 38g/m², thickness: 50 microns. No PPE. Package per 100 pieces.

Charlotte made of PP and folded. After use it remains open, so one sees the difference between used or not. Available in different colors. Packed in plastic bag or dispenser box. Very good fit. Feather light and pleasant to wear. Available sizes: Universeel (52cm en XL (55cm).

Coverall, 2-piece hood, external yellow stitched in seams, elasticated waist, cuffs, ankles and hood, nylon zipper. Category III, Type 5/6

Coverall, polypropylene / polyethylene with waterproof coating,elasticat wrists and ankles, elastic in the waist, zipper, hood. Available in white. Sizes: L - XXL.

Apron Prochem® with long sleeves and taped seams.

Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size.

Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).

Labcoat in Micromax NS fabric. Collar with four front fastening studs and two hip pockets. EMN101 - 97.20cm length, 62gsm microporous polyethylene film / spunbond PP laminate, Three thread overlock stitch.

Labjacket with velcro closure without pockets, 30g/m². Available sizes: L-XXL. Available colour: white

ChemMax 3 PLUS with NeoSol EC27F gloves + PULL CORD.

DuPont™ Tychem® 6000 Shin-length gown with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Available sizes: S/M - 3XL/4XL. Available colours: Gray.

Disposable coverall in lightweight, breathable, anti-static SMS material. Comfortable coverall with hood, elasticated around the face, wrists, waist and ankles. Stitched seams. Protection against hazardous dirt and dust and liquid aerosol. Can be used for work in hot environments. Available sizes: S-3XL. Available colours: White. Conforms to: EN13034, EN13982, EN1149 and EN1073-2.

DuPont™ Tyvek® 500 Labcoat with zipper model PL309NP. Labcoat with collar, available in white and in sizes SM to 2X. Zipper closure. Without pockets. Elasticated cuffs (tunnelled). Stitched internal seams. Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added. Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others. Available sizes: S-2XL. Available colours: white.

Gown Tychem 2000 C (Shin-length) with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Available sizes: S/M and L/2XL. Available colours: Yellow.

Hood, TYVEK ®, polyethylene, non-woven, 41gr./m², antistatic, elastic around face and under chin. Available in: white. Sizes: 1 size.

Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.

Coverall, 65 gsm microporous film laminate, with 55 gsm SMMS polypropylene back panel, covered over by the microporous film laminate. with Hood, elastic waist wrists and ankles, Taped seams. White with orange panel on the back.

DuPont ™ Tyvek® 600 Plus. Hooded suit available in white, sizes XS to 7X (also available in green). Robust and light (<(><<)>250 g per garment). Self-adhesive flap on the chin for optimal fit around the mask. Elastics around the face, wrists and ankles and elastic waistband. Elasticated thumb guard prevents the sleeve from rising. Tyvek® garments are made from high-density, high-density polyethylene, providing the ideal balance of protection, durability and comfort. Tyvek® is permeable to air and water vapor, while repelling aerosols and aqueous liquids. It provides an excellent barrier against fibers and fine particles (up to 1 micron), has extremely low particulate release and is antistatic. No silicone additions Tyvek® 600 Plus apparel applications include maintenance and dismantling of the nuclear industry, the pharmaceutical industry or research and biosafety laboratories, as well as medical applications and exposure to biological hazards. Certified selon Regulation (EU) 2016/425 Chemical Protective Clothing, Category III, Type 4-B, 5-B and 6-B EN 14126 (barrier against infectious agents) Antistatic treatment (EN 1149-5) - both sides Robust and protective seams (sewn and covered) Tyvek® Flap Closure for added protection Elasticated around the face, wrists and ankles for optimal fit and to reduce contamination and fluffing

Hairnet, polypropylene, flap, covers the ears. Available in: White.

Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model with stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, Safegard Panel on backside.

Overshoe, Tyvek ®, elastic at ankles, length 40 cm, one size.

Lightweight overall with hood, made of SMMS polypropylene, intended for limited use in dry conditions. Combines protection against dirt and non- hazardous substances with high comfort and breathability. Features nylon zipper with flap, external seams and elastic at wrists and ankles.

Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.

System for attaching most types of chemical gloves to the garment sleeve through the use of 2 concentric rings. Very easy to attach your chemical gloves to the Chemmax coverall. 1 box contains 5 sets for 5 coveralls (10 black and 10 white rings). For use with CHEMMAX 1,2 and 3 coveralls. In line with EN 14605 Type 3 in combination with coveralls.

This apron is made of polyethylene and is recommended for use in the food industry. Available colors: Blue, green, yellow, red and white. Dimensions: 117 * 69cm.

Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.

DuPont™ ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. Colours: Xhite Sizes: M-3XL. Compliant with: EN 1073-2:2002, EN ISO 13982-1:2004 +A1:2010, EN 13034:2005 + A1:2009, EN 1149-5:2008 and EN ISO 14116:2015.

Overshoe in breathable upper material in PP (white). CPE sole in hardwearing, strong and waterproof material. No seam at the bottom of the sole, making these overshoes more comfortable and have a longer life. Dimensions: 42 x 16.5cm. Available size: XL (Universal) Available colors: white and blue. Suitable for work in the food sector and hospitals. No PPE.

Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.

Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside). Includes dissipative socks. Available sizes: S-3XL. Available coloours: Gray.

DuPont™ Tychem® 2000 C Sleeve model PS32LA. Stitched and over-taped seams. Yellow.

Overshoes,Tyvek®, non-slip sole, antistatic treatment, elastic at the ankles . Available in: white. Sizes: M (36-42), L (42-46).

Detectable beard mask in polypropylene with metal strip. Perfect for use in food or agro industry. Available colour: blue.

High visibility disposable coverall in TYVEK® (type 5/6). Coverall with collar, reflective striping on the shoulders, chest, arms and legs. Elasticated waist, ancles and cuffs, zip closure. Available sizes: S- 3XL. Available colour: hi-vis orange.

Arm protector, polyethylene, thickness 20 microns, length 40cm. Pack of 100. Available in: blue, white, red, green and yellow.

Sleeved apron in Tychem®ThermoPro (combination of Tychem® fabric with the inherent flameretardant properties of Nomex®. With adjustable buckle on back and shoulders. Sleeves with elasticated cuffs. Nomex® sewed and taped seams. Offers a triple protection against a variety of chemical liquids or splashes, electric arc and thermal risks. Can be reused if not damaged or contaminated. Available sizes: S-3XL (S and 3XL mate to order). Available colours: orange.

Overall, polypropylene with a microporous film, limited use, microporous film gives for extra protection in damp conditions such as light splashes of few hazardous liquids.

High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.

TYVEK® IsoClean® sleeve option 00 (Bulk Packed) Bound seams. Covered elastic at both ends. 45 cm long. White. Available sizes: one size For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.

TYVEK® IsoClean® slip-retardant boot cover option 00 (Bulk packed) Bound seams. Covered elasticated leg opening. Ankle ties. Strong Gripper™ sole. White. Available sizes: M and L (M = up to EU 39,5 - L = up to EU 48,5) For cleanrooms up to ISO 7, GMp C/D NOT CLEAN PROCESSED. NOT STERILIZED.

TYVEK® IsoClean® slip-retardant shoe cover option 00 (Bulk packed) Serged seams. Elasticated opening. Slip-retardant Gripper™ sole. White. Available sizes: M and L (M = up to EU 39,5 - L = up to EU 47) For cleanrooms up to ISO 7, GMP C/D. NOT CLEAN PROCESSED. NOT STERILIZED.

TYVEK® IsoClean® frock with bound neck option 0B (Bulk packed) Bound seams. Covered elastication at wrists. Front snap closure for easy donning and doffing. White. Available sizes: S - 3XL For cleanrooms up to ISO 7, GMP C/D NOT CLEAN PROCESSED. NOT STERILIZED.

Tyvek® IsoClean® IC 458B WS Boot cover Bound seams. Covered elasticated leg opening. Ankle ties. Slip-retardant Gripper™ sole. White. Available sizes: S - XL S fits up to EU 37 M fits up to EU 39,5 L fits up to EU 48,5 XL fits up to EU 53 For cleanrooms up to ISO 5, GMP A/B STERILE ONLY.

Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey