BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
Coverall, Tyvek®, breathable, antistatic, limited chemical resistant to water-based products, does not pill, stitched seams at outside, new improved hood with elastic, elastic at wrists (new design) and ankles, zip closure under flap.
Flame retardant and anti-static fleece. Quality: 60% modacrylic, 38% cotton, 2% AST, 280 gr / m². Available sizes: S-4XL. Available colors: Royal blue. Complies with: EN ISO 14116 index 3, EN ISO 11612 A1.B1.C1., EN 1149-5.
Neck tube, Modaflame™ knit 200g. EBT: 4.3 cal/cm² (fabric). Conform: EN ISO 11612 A1, B1, F1 ASTM F1959 EBT = 4.3 cal/cm2, EN1149-5, GOST-R certified
Trousers flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 side pockets, 1 legpocket with flap, 1 meterpocket with flap, 1 back pocket with flap, kneepockets, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy.
Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.
With the Druten sweater you will feel comfortable even in hazardous working situations as it provides protection against the risks of electrical flashover, against heat and flame, flamespread and static electricity. This navy sweater is finished with a small stripe segmented reflective tape and 2 side pockets with zip closure. Quality: 55% modacrylic + 43% cotton + 2% AST; ± 300 g/m². Available sizes: S-3XL. Available color: Navy. Complies with: IEC 61482-2 : 2018 APC1 - ATPV 14,8 cal/cm², EN ISO 11612 : 2015 / A1 B1 C1 F1, EN ISO 14116 : 2015 / IND.3 and EN 1149-5 : 2018.
Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.
Work trousers with hidden zipper, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insertion at the crotch to prevent tearing, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, corn blue / navy, gray / red and gray / blue.
Flame retardant, anti-static fleece, double sided fleece: 54% protex/34,2% coton/10% nylon/1,8% AST; 310 g/m², soft fleece material, good cold protection, breathable, can be zipped into different jackets, anti-pilling treatment, Stitched seams, straight collar, zip closure under flap with touch <(>&<)> close fastening, 2 inset pockets with zip closure, round inset sleeves, elasticated cuffs, elastic drawstring in hem , 1 inside pocket .
Trousers Diablo Multinorm: - 2 front pockets; - 2 back pockets; - 1 thigh pocket; - 1 meter bag; - knee pockets with cobra finnish. - Stretch elements M-Move - Industrial laundry Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-66 BE. Available colors: Gray / black and gray / yellow and navy/yellow Compliant with: EN 1149-5, IEC 61482-2 class 1, EN13034 tye 6, EN ISO 11611 class 1, EN ISO 11612 and EN 14116.
"Parka, Gore Tex Pyrad TM Fabric Technology, 2-layer laminated in polyester, waterproof, windproof, breathable (WWB). This parka combinest this WWB principle with the highest protection against heat and flame. Permanently anti-static technology. Industrial laundry at 60°C. Available sizes: S-4XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Balaclava, modaflame knit, 60% modacrylic, 39% cotton, 1% carbon fiber, 200g / m². ATPV: 4.3 cal/cm² (fabric).
Flame retardant work trousers with stretch for more comfort during work that requires optimal freedom of movement. Reinforced fly and stretch in the crotch area. Side pockets. Cargo bag with stretch and flap with concealed key ring, telephone pocket with flap. Ruler bag with tool pockets. Pre-shaped knees with knee pockets in HTFR Dobby and stretch. Stretch at the back. Back pockets with flap. Rear bottom reinforced with HTFR Dobby. Bottom legs adjustable with press studs. Entirely metal-free. Quality: Tera TX, 260 g / m². Available sizes: 44-64, 146-156, 96-120 EU. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 20471: CL.1 (ARC RATING: 9.5 cal / cm²).
Jacket flame retardant and antistatic, 80% cotton 19% polyester 1% anti- static yarn, satin binding, 280gr./m², 1 chestpocket with flap, 2 patched pockets with flap, hidden closure, retro-reflective bands. Available in: navy.
Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.
Trousers, Bizweld™ 330g, Designed to give maximum protection and comfort to the wearer, our Bizweld™ Trousers will keep you safe. The garment has a Flexi-Fit waistband; twin stitched seams for extra stength and side pockets with a conveniently placed rule pocket for quick and easy accessibility.
Flame retardant and antistatic hi-viz softshell in 100% polyester with FR PU coating and inherent FR fleece, 3-layer (400g/m²). Straight collar, zip closure with flap and velcro, chest pocket with zipper, 2 inset pockets, 1 gasdetector loop, adjustable cuffs by velcro, stitched seams, FR reflective striping, back length L: 77 cm. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Short jacket with hidden zipper and concealed press studs, 2 front pockets with flap, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra arm support to promote freedom of movement, cuffs with Velcro, extended back and reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66. Available colors: Black / gray, gray / blue, corn blue / navy and gray / red.
Welding vest from flame retardant cotton (330g / m²) with 2 chest pockets, mobile phone pocket under flap, double stitched for extra strength.
Balaclava, inherently flame retardant. Quality: 60% Modacrylic, 39% cotton, 1% carbon thread. Complies with: EN ISO 11612 A1.B1.C1.F1, EN 1149-5, 61482-2 class 1. Available colors: Marine. available sizes: Universal.
Jacket, Proban, 78% cotton 20% polyester 2% P140, 330 gr/m². ATPV: 37 cal/cm² (double layer), ATPV: 13.8 cal/cm² (single layer)
Coverall flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 chestpockets with flap, 2 patched side pockets, 1 meterpocket with flap, 1 back pocket with flap, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy, orange, red, charcoal and black.
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
Flame retardant anti-static long sleeve sweatshirt, modaflame knit, 300 gr/m².
These practical trousers with two inset pockets, one back pocket and one ruler pocket feel comfortable thanks to the breathable non-allergenic fabric and with a weight of 260 g/m² they are very light and comfortable to wear. For your convenience, there are also knee pockets in which knee protection can be inserted, and the elastic waist has belt loops. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44-64. Available colors: Navy.
Flame retardant work trousers with a thin lining, so that it complies with IEC 61482-2 class 2 arc. Back pockets with flap. Cargo bag with flap, telephone pocket and concealed key ring. Ruler bag. Pre-shaped knees with height-adjustable knee pockets on the inside. Entirely metal-free. Reflection on the pipes. Item is produced to order. Quality: Tera TX, 260 g / m², Available colors: Fluo yellow / navy. Available sizes: 44-46, 146-156, 24-30. Conform: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.2, EN 1149-5, * EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB [6], ARC RATING: 20.2 cal / cm².
Multi-risk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at waist. Quality: 79% / 20% / 1% Cat / Poly / AS. Available sizes: 44-66, 24-29, 47-57 HAV. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
This high-quality welding jacket is made of split cowhide and stitched with para-aramid thread. It provides enhanced protection to the hull during welding and is designed to last in the toughest conditions. Features: CE certified. Class 2 welding protection. Concealed easy to open closure. Velcro adjustable cuffs for snug fit. Designed to be worn under harsh conditions . In line with : EN ISO 11611 Class 2 (A1)
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Flame retardant and antistatic long sleeve t-shirt in Cantex Jersey AT (59% modacrylic/39% cotton/2% antistatic) (190g/m²). Round neck, ribbed cuffs, heat sealed segmented reflection striping. High visibility yellow accents on shoulders for better visibility. Available sizes: XS-4XL. Available colours: navy/hi-vis yellow.
Work trousers Millenia multirisk 12573 including: - 2 front pockets; - 2 back pockets; - 1 thigh pocket; - 1 meter bag; - knee pockets with cobra finnish. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-64 BE. Available colors: Fluo yellow / gray and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN ISO 14116, EN 1149-5, EN 13034 type6 and IEC 61482-2 class 1.
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).
Multinorm jacket Vendat with electric arc protection: upright collar; Hidden snap button closure under trim; 2 patch chest pockets with flaps; 2 patch pockets with flaps; 2 loops for gas detectors; round sleeves; Sleeve narrowing by means of press studs. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260gsm. Available sizes: 44-64 EU. Available colours: Fluo yellow / navy. In accordance with: IEC 61482-2 : 2009 Class 1 - ATPV 9.4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / class 2.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray. Available sizes: XS-2XL. in line with: EN 1149, EN 13034, IEC 61482, EN ISO 11611 (front class 2) and EN ISO 11612.
Flame retardant chinos with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Firefighting trousers in NOMEX® STRIKE (220g/m²), SOFIGUARD treated with PU FR membrane (145g/m²), internal aramid (ARALINEX) lining (250g/m²). Press-stud closure under velcro, external reinforcements on knees, executed in 2 parts for easy bending, removable suspenders, 2 patched leg pockets with extra knee pads in neopreen. bottom finished for protection against water rising, leg hem provided with KEVLAR® re inforcements, leg cuffs. Available sizes: 164/82 untill 194/124. Available colours: navy.
Trousers, Guardian H²O, flame retardant, antistatic, water and wind proof, elastic in waist, side pockets, reflective bands.
Flame retardant work trousers with increased visibility in a light and comfortable fabric with a high tear resistance. Back pockets with flap. Cargo pocket with flap, telephone pocket and concealed key ring. Ruler pocket. Pre-shaped knees with height- adjustable knee pockets on the inside. Completely metal-free. Reflection on the pipes. Quality: Tera TX, 260 g / m², Available colors: Fluo yellow / navy. Available sizes: 44-46, 146-156, 24-30. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB [6], TRANEMO SKINSAFE ARC RATING: 9.5 cal / cm².
Leather welding apron. With adjustable braces for a better fit, 1 large chest pocket and 1 front pocket with velcro. Kevlar® stitched seams. Available size: 1 size (91x58cm).
Flame retardant comfortable sweater with round neck and Hi-Vis accents on the sleeves. 20% recycled cotton. Knitted neck, cuffs and hem. With heat seal reflection. Entirely metal-free. Quality: Cantex Terry, 290 g / m². Available sizes: XXS-4XL. Available color: Fluo yellow / navy. Compliant with: EN ISO 11612: A1+A2 B1 C2 F2, IEC 61482-2: CL.1, EN 1149-5, ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
· Seamless and multifunctional tubular made with Thermolite®, an excellent insulating fabric composed of hollow-core fibres. · It enhances comfort in cold temperatures by wicking moisture away. · Ideal product for wearing all year round, offering a higher protection against cold and variable weather, specially for moderate cold weather thanks to its Thermolite® fabric. · Breathable fabric. · Maintain body temperature. · Some designs incorporate two 3M ScotchliteTM retro-reflective stripes for enhanced visibility in poor light conditions. · Polygiene® treatment, that allows the fabric to remain cleaner for longer avoiding bacterial growth and stops odors.
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
Inherently flame retardant metal-free switch jacket with Velcro closure at the front for quick doffing. PPE category 4 (>40 cal/cm²). The jacket has fluorescent shoulder pads for extra visibility and is made of supple, wind and water resistant softshell material. Velcro closure at the front. Adjustable cuffs. Quality: Windtech FR 550, 550 g/m², wind and water resistant. Available sizes: S-L-2XL-4XL. Available colours: Navy/fluo yellow. Complies with: EN ISO 11612: A1+A2 B2 C2 F2, IEC 61482-2: CL.2, EN 1149-5 and EN 13034: type PB[6].
Flame retardant, anti-static hi-vis rain jacket, SIOPOR® Excell: 3-layer fabric: Dobby Ripstop Polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 270 g/m², High performance lightweigth fabric, 100% waterproof, Windproof, Highly breathable, Water repellent outer fabric, Moisture attracting coating on the inside, Comfortable, Supple, High tear resistance, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, Back length 85 cm (L), Unlined, 2 inside pockets.
Havep Multi Shield multinorm work trousers model 80308
Exterior: Concealed button closure / Zip fly, 2 set-in pockets with flap, 2 back pockets with flap and hidden snap button closure, 1 patch thigh pocket with flap and hidden snap button closure, 1 ruler pocket with flap and hidden snap button closure, elasticated waist, knee pockets, waistband with belt loops, flame-retardant reflective tape (50 mm). Inside; identification tag. Material: Sio-Safe Essential Eco 50% cotton + 30% Tencel + 19% recycled polyester + 1% AST; +- 320 g/m. Complies with: EN 61482-2 9.7 cal/cm² ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 116111 class 1 A1 A2, EN 1149-5, EN 13034 (typ PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 48-58 S, 44-64 R, 46-56 L
Multirisk rain trousers with igh level of protection but still light in weight. The Hovi hi-vis trousers are a waterproof rain trousers with ARC protection in a light and improved Siopor® Excell fabric. The 3-layered fabric protects excellently against foul weather, heat, flames, welding sparks and the risks of an electrical flashover. These high-visibility trousers are soft and supple, making them a pleasure to wear in potentially hazardous working environments. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m²; 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Available colours: Fluo orange/navy and fluo yellow/navy.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
T-shirt, modaflame knit, 200 gr/m², flame retardant, anti-static, long sleeve.
Flame retardant work jacket with a thin lining, making it compliant with arc IEC61482-2 class 2. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Tunnel cord in the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Entirely metal-free. Item is produced to order. The delivery time is approximately 5 extra working days. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Compliant with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.2 *, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6. * The back of the jacket is unlined and complies with IEC 61482-2 CL.1, Arc Rating: 9.5 cal / cm². The front has an art rating of 20.20 cal / cm².
The Torvik is a premium hi-vis rain jacket which protects you against foul weather and the risks of an electric flashover. This supple jacket meets the high standards we set to our products regarding design, innovation and protection. The segmented reflective stripes not only add a modern touch, but also add to the breathability and comfortability of the jacket. The elongated backtail, preshaped sleeve ends and the use of an improved YKK-zipper with handy grip for easily opening and closing the jacket are some features which make this jacket stand out. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Hi-vis offshore trousers Ambok with arc protection: Front closure with zip; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Knee pockets; Waistband with loops for belt; Double stiched (2x2) flame retardant reflective striping (70mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44 - 64, 48S-58S and 46L-56L. Available colors: Fluo yellow/navy.
The Urbino fleece sweater protects against cold and against the thermal risks of an electric arc flashover. The sweater with upright collar and hidden zipper was provided with an elastic hem and an elastic in the sleeve ends. As an added advantage, the soft fleece fabric was treated against pilling. Quality: Double-sided fleece: 54% Protex + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Marine. Complies with: EN ISO 11612 A1.B1.C2.F1, EN 1149-5, IEC 61482-2 Class 1, EN ISO 14116 and EN 14058.
Detachable arc hood with chin protection and peak. Quality: FR PU + inherent FR knitting; ± 280 g/m² Available sizes: XS-3XL. Available colours: Navy.
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Flame retardant and antistatic hi-vis softshell jacket in 100% polyester with FR PU membrane and inherent FR fleece (400g/m²). Zip closure under flap with velcro, straight collar, 2 inset side pockets, 1 chest pocket with zipper, 1 inside pocket, cuffs adjustable by velcro, 1 loop for ID badge, detachable sleeves, length back: 75cm, stitched seams. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Comfortable and breathable trousers with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Flame retardant shirt Rufford with arc protection: Lay-flat collar; Closure with hidden press studs under flap; 2 patched chest pockets with flap closed by concealed press studs; Round sleeves; Sleeve narrowing by press studs; Welded, segmented reflective tape. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g/m ². Available colors: Navy/fluo yellow. Available sizes: S-3XL.
Flame retardant work trousers in a light and comfortable fabric with a high tear resistance. Back pockets with flaps. Cargo pocket with flap, telephone pocket and concealed key ring. Ruler pocket. Pre-shaped knees with height -adjustable knee pockets on the inside. Completely metal-free. Quality: 811: Tera TX, 260 g / m², LOI: 29.8%. Available sizes: 44-64, 146-156, 96-120 EU. Available colors: Navy. Conforms to: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: APC 1, EN 1149-5, * EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB [6].
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
This durable and multifunctional arc coverall features six different pockets on the outside and one on the inside. This model with d ouble-stitched reflective FR strips is made from a very light fabric weighing only 260 g/m². At the same time, the fabric is very breathable and supple, flame-retardant, anti-static and offers you excellent protections against heat and metal splashes. For extra comfort and a good fit the waist can be adjusted, the sleeves can be narrowed by using press studs and knee protection can be pushed into the knee pockets. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Navy. Available sizes: 44-64.
Jacket, ME - 75% cotton 24% polyester 1% antistatic, 2/2 twill weave, 360 gr/m², covered press-stud fastening, 2 front pockets with flap, breast pocket with flap, inside pocket, back pleats, sleeves with adjustable press-studs.
BasePro chainsaw jacket: The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work. The BasePro chainsaw jackets, which are the most economic pair of SIP Protection jackets of the range, still provide the comfort you want, the protection you need and the quality you expect from SIP Protection. Quality: Water repellent 65% Polyester - 35% cotton outer fabric, 210 g/m2. Available sizes: S-4XL. Available colours: Orange/grey.
Flame retardant and antistatic buff with arc flash protection in 44% meta-aramid, 42% FR Viscose®, 6% Tencell®, 3% para-aramid, 3% AST, 2% elasthane. Keeps body temperature in cold environments. Very comfortable thanks to its elastic fibres and viscose®. Protects against heat, flames and arc flash risks. Dimensions: 25 x 50 cm. Available colours: navy.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
