BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Disposable coverall in polypropylene SMS with hood and two-way zip with zip flap. Model for general purpose applications. Three-thread overlocked seams and elastic hood, waist, ankles and wrists. Available in white and blue. Type 5-6.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
Coverall, Tyvek®, breathable, antistatic, limited chemical resistant to water-based products, does not pill, stitched seams at outside, new improved hood with elastic, elastic at wrists (new design) and ankles, zip closure under flap.
Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model wi thstitched and taped seams, two times zipper under flap, with hood andelastic at the wrists and ankles, reinforcement at the knees. Suitablefor: chemical and petrochemical industries, pharmaceutical industry, waste collection and processing, tank cleaning, emergency response services, all activities involving risk of contamination with less aggressive chemicals. Sizes: S - XXXL.
Coverall, polymer coating, stitched sealed seams, zipper under double adhesive cover, elastic at wrists and ankles, elastic in the waist, fixed hood (also with elastic), thumb loops. Recommended for treatment of chemicals, 100% particle tight, resistant to splashes of hazardous liquids (up to 2 bar). Available in: yellow.
Coverall, double polymer coated, extra layer of chemical resistant film, 100% particle tight, resistant to splashes of hazardous liquids (up to 5 bar), fixed hood with elastic, stitched and sealed seams, elastic at wrists and ankles and waist, zip with double flap and adhesive, thumb loops. Available in: orange, gray.
Coverall, 50gr./m² polyester viscose rayon mix, firming nylon film on the inside, non-woven, flame retardant, limited use, to wear above heat- insulating clothing, 3-thread overlock seams, offers protection against hazardous dust and dirt. Available in: Blue.
Coverall, 63gr./m², microporous fim laminated, good moisture vapour transmission, three-piece hood, antistatic, elastic at hood, elastic at wrists, elastic at ankles, elastic at waist, zip closure under flap, 3- threads overlock and taped, breathable back in Safegard blue. Available in: white. liquids and hazardous dry particles, paint spraying, general cleaning and maintenance applications, asbestos removal and handling, food processing applications, protection against oils & resins. In line with: EN1073-2, EN1149, prEN 13034 Type 6, prEN 13982 Type 5.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.Suitable for: MultiRISK applications in chemical and petrochemical companies, refineries, tank cleaning. Sizes: S-XXXL. EN14605 type 3 & type 4, EN 1149-3, EN ISO 14116 index 1
Coverall with hood. Stitched and over-taped seams. Thumb loops. Elastication at wrists, ankles and face. Elasticated waist (glued-in). Tyvek® zipper. Self-adhesive zipper and chin flap. White with bright orange tapes. Antistatic (inside). Additional taping of cuffs, ankles, hood and zipper flap required to achieve Type 3 liquid tightness
Lab coat, Tyvek ®, 41gr. / M², anti-static treatment, inside seams, zipclosure, 2 patched pockets, collar. Available in: white.
Coverall, laminated, white, chemical overall for limited use, with a Saranex 23P barrier film. Protects against hazardous chemical spattersand sprays. Model with stitched and taped seams, two times zipper underflap, with hood and elastic at the wrists and ankles, reinforcement onthe knees.
Coverall, laminated, for limited chemical use, composed of various composite layers, including the highly protective EVOH layer. Protects against hazardous chemicals in spray and liquid form. Grey version has stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, reinforcement on the knees.
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).
Sleeve, Tyvek®, length 50cm., adaptable for shorter arms. Available in: white. Sizes: universal size.
ChemMax 3 PLUS with NeoSol EC27F gloves + PULL CORD.
Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model with stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, Safegard Panel on backside.
Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.
Apron Prochem® with long sleeves and taped seams.
Coverall, 65 gsm microporous film laminate, with 55 gsm SMMS polypropylene back panel, covered over by the microporous film laminate. with Hood, elastic waist wrists and ankles, Taped seams. White with orange panel on the back.
Gown Tychem 2000 C (Shin-length) with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Available sizes: S/M and L/2XL. Available colours: Yellow.
Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.
DuPont ™ Tyvek® 600 Plus. Hooded suit available in white, sizes XS to 7X (also available in green). Robust and light (<250 g per garment). Self-adhesive flap on the chin for optimal fit around the mask. Elastics around the face, wrists and ankles and elastic waistband. Elasticated thumb guard prevents the sleeve from rising. Tyvek® garments are made from high-density, high-density polyethylene, providing the ideal balance of protection, durability and comfort. Tyvek® is permeable to air and water vapor, while repelling aerosols and aqueous liquids. It provides an excellent barrier against fibers and fine particles (up to 1 micron), has extremely low particulate release and is antistatic. No silicone additions Tyvek® 600 Plus apparel applications include maintenance and dismantling of the nuclear industry, the pharmaceutical industry or research and biosafety laboratories, as well as medical applications and exposure to biological hazards. Certified selon Regulation (EU) 2016/425 Chemical Protective Clothing, Category III, Type 4-B, 5-B and 6-B EN 14126 (barrier against infectious agents) Antistatic treatment (EN 1149-5) - both sides Robust and protective seams (sewn and covered) Tyvek® Flap Closure for added protection Elasticated around the face, wrists and ankles for optimal fit and to reduce contamination and fluffing
Labcoat in Micromax NS fabric. Collar with four front fastening studs and two hip pockets. EMN101 - 97.20cm length, 62gsm microporous polyethylene film / spunbond PP laminate, Three thread overlock stitch.
Coverall, 2-piece hood, external yellow stitched in seams, elasticated waist, cuffs, ankles and hood, nylon zipper. Category III, Type 5/6
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.
DuPont™ Tyvek® 500 Labcoat with zipper model PL309NP. Labcoat with collar, available in white and in sizes SM to 2X. Zipper closure. Without pockets. Elasticated cuffs (tunnelled). Stitched internal seams. Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added. Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others. Available sizes: S-2XL. Available colours: white.
Hood, TYVEK ®, polyethylene, non-woven, 41gr./m², antistatic, elastic around face and under chin. Available in: white. Sizes: 1 size.
DuPont™ ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. Colours: Xhite Sizes: M-3XL. Compliant with: EN 1073-2:2002, EN ISO 13982-1:2004 +A1:2010, EN 13034:2005 + A1:2009, EN 1149-5:2008 and EN ISO 14116:2015.
DuPont™ Tychem® 2000 C Sleeve model PS32LA. Stitched and over-taped seams. Yellow.
System for attaching most types of chemical gloves to the garment sleeve through the use of 2 concentric rings. Very easy to attach your chemical gloves to the Chemmax coverall. 1 box contains 5 sets for 5 coveralls (10 black and 10 white rings). For use with CHEMMAX 1,2 and 3 coveralls. In line with EN 14605 Type 3 in combination with coveralls.
Dupont Tyvek® 500 HP (Harness Protection) TY178S HP coverall with four D-ring sleeves attached to the garment.
DuPont™ Tychem® 6000 Shin-length gown with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Available sizes: S/M - 3XL/4XL. Available colours: Gray.
High visibility disposable coverall in TYVEK® (type 5/6). Coverall with collar, reflective striping on the shoulders, chest, arms and legs. Elasticated waist, ancles and cuffs, zip closure. Available sizes: S- 3XL. Available colour: hi-vis orange.
Lightweight overall with hood, made of SMMS polypropylene, intended for limited use in dry conditions. Combines protection against dirt and non- hazardous substances with high comfort and breathability. Features nylon zipper with flap, external seams and elastic at wrists and ankles.
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside). Includes dissipative socks. Available sizes: S-3XL. Available coloours: Gray.
Overall, polypropylene with a microporous film, limited use, microporous film gives for extra protection in damp conditions such as light splashes of few hazardous liquids.
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves and dissipative socks. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
DuPont™ Tyvek® 400 Dual TG. Overall with hood. Tyvek® on the front and large breathable SMS on the back. Stitched seams also taped on the upper body: armpits and wrists where Tyvek® liner gloves are attached. Attached Tyvek® socks. Elastic hood. Elastic waist (stitched in). Tyvek® zipper and flap. Chin flap with adhesive tape. NOT individually wrapped, 25 pieces in one box. Conforms to: EN 1073-2, EN 1149-5, Type 5/6 Available sizes: S - 3XL Available color: white *MADE TO ORDER*
High barrier Type 3 <(>&<)> 4 chemical suit combined with FR properties. Can be worn over Thermal Protective (EN11612) Garments without compromising thermal protection as a standard chemical suit would. Quality: PVC film / EVOH film/ woodpulp/polyester nonwoven fabric. 232g/m². Available sizes: S-XXXL. Available colours: Dark blue.
Robust yet lightweight protection providing a barrier against fine particles and low-level sprays in an extremely breathable white hooded coverall made with the innovative new Tyvek® APX™ fabric.
Ventilated coverall with stitched and over taped seams. Fully enclosed over hood with clear front and crown see through visor. Front closure with double flap hook and loop, single zipper closing to center, horizontal opening. Three exhaust valves; two at hips one in hood back. Air distribution plenum made of Tychem® 6000 fabric. Emergency Egress. Attached non-dissipative under gloves and integrated dissipative socks. Conform: EN 1073-1, EN 1149-5, EN 14126, EN 14594, CAT 3 *Made to order. Available sizes: S-3Xl Available color: grey
Fully encapsulating ChemMax 1 suit with HDPE barrier fabric to be worn with the e-breath Powered Air-Purifying Respirator. Version with non-slip soles.
DuPont™ Tyvek® 500 HV TY127S XG. Hooded coverall. Ergonomic-protective design. Respirator fit hood. Elasticated wrists and ankles and waist. Zipper made with Tyvek® material, Tyvek® flap. Fluorescent orange with grey retroreflective bands. Retroreflective bands create a symmetric "X" on the back of the coverall distinguishing rearward and forward orientation of the wearer. Stitched external seams.
Fully encapsulating ChemMax 1 suit with HDPE barrier fabric to be worn with the e-breath Powered Air-Purifying Respirator
Coverall with hood, elastic face opening and chin flap for a tight fit around the breathing mask, stitched and taped seams, double adhesive zip, double zip and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle-tight fabric, excellent barrier against a wide range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Anti-static treatment (inside). Includes non-dissipative gloves. Available sizes: S-3XL. Available colors: gray. In accordance with: EN 1073-2: 2002, EN14605: 2005 + A1: 2009 (Type 3/4), EN ISO 13982-1: 2004 + A1: 2010 (Type 5), EN 13034: 2005 + A1: 2009 ( type 6), EN14126: 2003 and EN 1149-5: 2008.
ChemMax® 3 fully encapsulating suit for use with the "e-breathe" Powered Air Purifying Respirator (PAPR)
