BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 10. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Disposable ABEK gas filter made of plastic with rubber mouthpiece and nose bridge. Provides protection against organic and inorganic vapours, solvents, sulphur dioxide, acidic gases, ammonia and organic ammonia derivatives. Working time: at least 5 minutes. Packaged in plastic box with belt-or clothing clip. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Shelf life: four years (temeratures between -5°C to 50°C and humidity 90%).
Large particle pre-filter, for installation between dust filter and spark arrestor in Adflo motor unit. Prevents rapid clogging of g as and dust filters, which increases the service life. Very useful for work in very dusty environments.
ABE1 filter protects against organic and inorganic gases and sulphur dioxide. Can be used in combination with the Adflo motor unit. If ABE1 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation o n a single battery is desired. Class 1 gas filter: for max. concentration of 0.1%.
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Spark arrestor that prevents dust filter in Adflo motor unit from catching fire. Can be placed in grey portion of Adflo motor unit.
Battery LI-ON, heavy duty, for Adflo motor unit. Allows approx. 8 hours of work if a combination of dust and gas filters are used on the Adflo motor unit.
Escape mask (halfface) with ABEKP2 filter. Protects against organic and inorganic gases, solvents, sulphur dioxide, acidic gases, am monia, organic ammonia derivatives and toxic dust, mist and smoke particles. Easy to put on. Working time: at least 15 minutes. Pack aged in plastic box for belt or wall attachment. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosp here. Shelf life: four years.
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
Dust mask, class P2, for harmful dust, with layer of active carbon for ozone with concentration 10 x MAC. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. With internal nose pad for comfort. Fitted with non-adjustable, elastic headbands with closure. NPF: 10.
Set female and male coupling CEJN '342', 3/8"BSP. Equipped with screw thread. Combinable with compressed air hoses of 3M and filter unit AirCare of 3M.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01TW, Adflo particle filter, adflo motor unit and carrying case.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Automatic welding helmet from the G5-01 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. Adjustable airflow distribution with three automatically darkening welding filters. Width of welding filter: 73x109mm. Battery life: 1500 hours.
Black pouch on a belt to wear around the waist and easily transport the miniscape escape filter. Weight: 45g. No PPE.
Self-rescuer, compact, lightweight and ergonomic. Can be worn on the body or mounted on the wall in a waterproof box. Is used to escape from a lack of oxygen, but also against toxic gases and particles and provides the user with oxygen for 15 up to 32 minutes (depending on the effort and stress of the user). Operation based on a small compressed air bottle which adds 02 to expired air. Delivery in orange storage box. Version without hood. Belt sold seperately as an accessory. 15-year life cycle.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Oxygen-producing self-rescuer with mouthpiece, nose clip and goggles, for very harmful conditions and/or places where there may be a lack of oxygen. Stored in a hermetically sealed container carrying box option to order belt holder loops for carrying on a belt. Operation based on a small compressed air bottle and a technology that converts CO2 into oxygen. With glasses, transportation pouch, overpads. Operating time: 30 to 60 minutes (depending on effort and stress). Shelf life: 15 years.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK2P3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists.
Carrying strap for (trainer) self rescuer M40 SCR.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
Evacuation hood with full-face mask in overpressure, for potentially high concentration gas leaks, no degradation of components by H2S, on compressed air 2L-filled composite bottle, working time 15 min. Can be used in the event of oxygen deficiency. Can be maintained. Weight: 4.7 kg.
Pouch to attach to belt 1057147.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory.
Escape hood on compressed air for very toxic conditions and/or places where can be a lack of oxygen. The escape mask consists of a hood with an integrated rubber half-mask. The bag contains a 3 litre, 200 bar metal filled air cylinder. As soon as the bag is opened, the breathing air is automatically activated. While wearing the mask, the user sees a continual indication of the amount of escape time that remains. Bag can be used to carry escape set while it is closed or opened. Working time: at least 15 minutes. Weight: 6 kg. Flow rate: approx. 35 l/min.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEK CO P filter for protection agiainst CO and from vapours and mists that may originate in case of fire, dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia ant its derivates, as well as dusts, fumes and mists. Suitable for use in ATEX environments.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
The NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Output for 2 persons / compressed air hoses to be installed on Sundström filter system.
Odour filter that removes unpleasant odours. Does not provide protection from gases or vapours, only improves comfort. If gas filter s are already being used, it is unnecessary to use an odour filter. Can be used in combination with the Adflo motor unit. Suitable f or: processes involving chemical risks.
Protection sleeve breathing hose Adflo. No PPE.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEKP filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia and its derivates. As well as smoke, fumes and dusts. Suitable for use in ATEX environments.
Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks with headband. Adjustable air stream. Cassette not included.
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 TW, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 VC, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Oxygen producing breathing apparatus with closed stainless steel carrying box with carrying belt. For very hazardous circumstances a nd/or places where a lack of oxygen may develop. Stored in a hermetically sealed, stainless steel carry bag with a strap for carryin g it over the shoulder. Works using an oxygen generating KO2 cell that can be replaced once it is used. KO2 cell is activated by fir st exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, only requires annual test of seal. Working ti me: at least 90 minutes at consumption of 30 l/min. (escape), 300 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 4.9 kg.
Heavy duty welding helmet G5-01 without welding filter and neck or head protection, with replacement shell. Designed for heavy welding and grinding and can be connected to the Adflo powered protection for a TH3 class respiratory protection (NPF500). Cassette (available separately). Conforms to: EN379/ EN175.
Device for practicing the use of the self-rescuer M20.2 Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Extra mouthpieces available as an accessory.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Training version of the NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Complete motor unit kit consisting of SR500 motor unit, SR570 (bump) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Device for practicing the use of the self-rescuer M20.2 with hood. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Spare mouthpieces sold seperately.
Extra mouth piece for trainer selfrescuer M20 devices.
Industrial Air hood with safety helmet SR 575 to be combined with motor unit SR 500/ SR 500 EX or SR 700, and with SR 507 for use with compressed air.Transparent visor in PC. Air channel leads to the visor to avoid fogging of the visor. Lightweight construction with low centre of gravity ensures a balanced and ergonomic fit. Adjustable head harness ensures secure and personalised fit.A wide range of accessories makes the helmet suitable for different applications.
Blue compressed air hose, 30 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Carrying harness consisting of two shoulder straps and one hip belt to comfortably carry SSR30/100 B on the body in both the unopene d and opened position.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that themaskalwaysretains its shape, even when worn for extended periods or after folding the mask. The pleated filter technology reducesbreathingresistance to 50%. Reusable. Fitted with non- adjustable, elastic headbands with closure. Packed per piece. NPF: 10. 149:2001.
Escape hood offers protection for escape from chemical-polluted environments, it has a duration of 15 minutes and is a disposable de vice, to be disposed after use. It comes in a universal size. The bag is made of antistatic fabric with belt loops, ring for wall application and side rings for shoulder use. Te orange fluo hood is sealed in a vacuum bag and equipped with a wide panoramic anti-fogging visor, and elastic self-adjusting harness with an elastic tight collar. The silicone halfmask is anatomically shaped and designed ot fit perfectly. Version with ABEKHgP3 filter for protection agiainst dusts, fumes and mists, and organic and inorganic gasses and vapours, sulphur dioxide, hydrochloric acid and other gases, ammonia and its derivates, mercury vapours, dusts, mists and fumes. Suitable for ATEX environments.
To be installed on Sundström filter system.
Trainer self-rescue set SSR 30/100 and SSR30/100 B.
Black compressed air hose, 10 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Bag to provide victim with air. Compressed air bottle of 6-6.8 or 9L to be ordered separately. Connection for mask with regulator (to be ordered separately) for victim. Easy-to-read pressure gauge to indicate level of the remaining air. With extra compartment for accessories. Dimensions: H: 29cm, L: 75cm, W: 17cm. Weight with Single Laine <(><<)>(><(><<)><(> <<)>)> 6 kg.
Chemical resistant Neoprene air cap with integrated safety helmet, including belt with control valve for connection to compressed air network.
Device for practicing the use of the self-rescuer M40. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer.
Complete motor unit kit consisting of SR500 motor unit, SR575 (safety helmet) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
