BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Made from an inherently flame-retardant, breathable and supple fabric, harmless to the skin, this jacket offers excellent arc protection, and protection against heat and metal splashes. It is equipped with double-stitched reflective FR strips for increased visibility. The tailored jacket is anti-static and resistant to wear, shrink and pilling, even after frequent washing. Quality: 57% aramid + 42% polyester + 1% AST; ± 260 g/m². Available sizes: 44-64 EU. Available colours: Fluo orange/navy.
Comfortable and breathable overall with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 44-64.
Flame-retardant and anti-static work jacket 6035 81 with a thin lining. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Completely metal-free. Quality: Tera TX NON-METAL, 260 g/m². Available sizes: XS-4XL. Available color: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E1 F1, EN 1149-5, EN ISO 11611 klasse 1 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 8,1 cal/cm², EBT: 8,7 cal/cm².
Safety helmet made of polyester resin with fibreglass reinforcement. Lightweight: +/- 312 g. Heat resistant to +/- 150 °C. textile headband. Vabon sweatband at front. Colours: white, blue, red, orange and yellow. Headband adjustable with ratchet.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Jacket in 31% polyester/28% modacrylic/20% aramid/20% viscose FR/1% AST (320g/m²). Zip closure under flap with press-studs, high collar, 2 patched front pockets with flap, 2 patched chest pockets with flap, 2 loops for gas detection equipment, adjustable cuffs by press-studs, elongated back, flame retardant reflective striping. Available sizes: 44-64. Available colours: hi-vis orange/navy.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Hi-vis coverall Mornant with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo orange/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
The 3M™ Speedglas™ G5-03 Pro Welding Helmet is specially designed for the versatile welder. This helmet allows you to switch between welding and grinding work thanks to our new Tap functionality. With extensive adjustment options, including more control over how you view your weld pool and how you configure the helmet for extra protection against radiation, sparks and splashes, the G5-03 puts you in control of your protection. With 3M™ Speedglas™ Natural Color Technology, Variable Color Technology (with G5-01/03VC) and a tack welding mode (with G5-01/03TW).
Soft cotton spare sweatband for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 3-piece packaging. No PPE.
Fall-stop device 2 metre kevlar band with integrated shock absorber with scaffolding hook on side with fall indicator. Plastic casing. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Also suitable for fall factor 2.
Hood with ARC protection (APC 2). This rain hood offers protection against heat, flames, liquid chemicals and offers also protection in welding situations. Available sizes: S-3XL. Available colours: Navy.
Flame Retardant Coverall bizflame FR51: Protects against radiant, convection and contact heat; Class 2 welding protection; Back pleat for more freedom of movement; Adjustable hem for all leg lengths; adjustable cuffs; UPF 40+ fabric blocks 98% of UV radiation radio loops; 10 storage bags; knee pockets; Concealed zipper. Quality: Bizflame Plus: 99% cotton, 1% carbon fiber 350g/m². Available colors: Navy and Orange. Available sizes: XS-2XL. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 2 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-1 Elim 8.6 cal/cm² and IEC 61482- 2 IEC 61482-1-2 APC 1 (12 ATPV 13.6 cal cm²).
Welding cap with elastic back. Quality: Cantex 1210, 350 g/m².
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Seams made out of Kevlar. Fitted with a breathable liner in 3D-mesh. Outsole in PU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT+ Gel insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. Anatomical, perforated. Sizes: 35-48.
Multirisk bib and brace with concealed zip, 2 inset side pockets, chest pocket with flap, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, adjustable shoulder straps with elastic, reflective band. The front meets arc class 2. Quality: 80% / 19% / 1% Cat / Poly / AS. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, blue / navy and red / blue. Conform: EN 1149-5, EN ISO 11611 A1A2 cl 1, EN ISO 11612 A1A2B1C1E2F1, EN 13034 and IEC 61482-2.
Automatic welding cassette with three automatically darkening welding filters.Suitable for helmets G5-01 and G5-03. Dimensions of welding filter: 73x109mm. Battery life: 2000 hours.
Output for 3 persons / compressed air hoses to be installed on Aircare filter system.
The first automatic welding mask with a curved auto-darkening filter - especially for TIG welding! Previously, automatic darkening filters were always flat. If you wanted a larger field of vision, you needed a larger helmet with plenty of room for it. Because the curved cassette is around the face, it is possible to fit a large field of view (150mm x 76mm) in a very slim mask. Light level 2.5, dark levels 8-12. Equipped with natural color technology for high-contrast vision. Four arc sensors ensure that the G5-02 shifts reliably even at very low TIG settings. G5-02 can be securely connected to the smartphone via Bluetooth via the 3M Connected Equipment app.
Outer protective visor for the 3M ™ Speedglas ™ Automatic Welding Mask G5-02 to protect the Auto Blackout Filter from sparks, splashes and scratches.
The M-985 Earmuff Assembly allows 3M™ Versaflo™ M-100 Series and M-300 Series users to use headgear-mounted earmuffs. SNR: 28dB In accordance with: EN 352
3-layer softshell: polyester fabric + breathable FR PU + inherent FR Fleece ; ± 365 g/m², Softshell ARC protection Class 1 Conform to new FR standard EN ISO 11612, High performance lightweight fabric, windproof, highly breathable, Waterrepellent outer fabric, Comfortable, Supple, Good cold protection, Stitched seams Straight collar, Zip closure under flap with touch <(>&<)> close fastening, 1 inset chestpocket with zip closure, 2 inset pockets, 1 loop for badge, Round inset sleeves, Sleeve narrowing by touch and close fastening, Back length 75 cm (L), 1 inside pocket.
Coverall Force+ with concealed press stud fastening, 2 inset side pockets, 2 thigh pockets with flap, 1 breast pocket with flap, 1 back pocket with flap, knee pockets, elastic in back, sleeves with adjustment press studs, reflective tape on shoulders, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS Available sizes: 44-66 Havep. Available colors: Blue / gray, Black / gray and gray / yellow. Conform: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1 D0 E0 F0, EN IEC 61482-2 class 1.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Seams made out of Kevlar. Fitted with a breathable liner in 3D-mesh. Outsole in PU/E-TPU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. Anatomical, perforated. Sizes: 35-48.
Peltor Earmuffs to be used with the Speedglas 9100. These ear muffs provide moderate level of attenuation that meets the needs of most welding industry applications. Liquid sealing rings for improved comfort. Easy to replace cushions and inserts helps keep them hygienically clean. Large space inside cup helps reduce moisture and heat build-up. SNR: 24dB.
Designed to give maximum protection and comfort to the wearer, the Bizweld™ sleeves will provide protection in hazardous conditions. The elasticated cuffs ensure a flexible but comfortable fit. Must be worn with a suitable coverall or jacket/trouser combination. Quality: 100% Cotton, FR Finish. Available sizes: Universal. Available colours: Navy.
Compress to use for first, second or third degree burns. Safe, efficient and effective cooling method for burns. The compresses are made of a synthetic foam, that can fix the maximum amount of gel and therefore seamlessly connect to all contours of the body. Sterile milk white to clear hydrogel, largely consisting of water (96%) with preservatives. Tea Tree Oil disinfects, stimulates, is antibacterial and prevents the formation of scar tissue. Cools, relieves pain and minimises the development of the burn. Dimensions: 20 x 45cm.
Compact bandage cabinet for construction. Includes : 2 x quick bandages 7x10cm, 1 x quick bandage 12x14cm, 1 x triangular bandage, 10 dabbers, 10 sterile pads, 1 crepe bandage 7cm, 1 elastic bandage 6cm, 1 elastic bandage 8cm, 1 adhesive plaster 1.25cm, 1 wound plaster 6cmx1m, 1 assorted plasters, 1 disinfection spray, 1 tweezers Feilchenfeld, 1 Lister scissors, 1 resuscitation screen , 1 rescue blanket , 1 First Aid note, 12 safety pins, 2 pairs of gloves, 1 PLUM eyewash 200ml, 1 Burnshield 10x10cm, 1 hanging bracket
Multirisk bib and brace trousers from the Havep Force+ range with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, adjustable shoulder straps with elastic. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available sizes: 44-66 Havep. Available colors: Gray / yellow, blue / gray and black / gray. Conform: EN 1149-5, EN 13034, EN ISO 11611, En ISO 11612 and IEC 61482.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray, black / gray and gray / yellow. Available sizes: XS-2XL. Conforms to: EN 1149, EN 13034, IEC 61482, EN ISO 11611 and EN ISO 11612.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. The unit consists of a regulator, pre-collector and main filter (SR 292), all of which are mounted in an enclosing steel sheet stand. The unit can be placed on the floor or mounted on a wall. The pre-separator has automatic drainage, separates coarser particles, water and oil. The SR 292 main filter consists of a carbon filter part (500g) , surrounded by two P3 particulate filters. The air is cleaned to remove any remaining particles/gases/vapours/odours. A Y coupling that increases the number of outlets is available as accessory.
Head protection in Tecaweld for Speedglas 9100. Not separately certified as PPE.
Flame retardant inflatable life jacket for welders: • Durable aluminized Panotex silver wipe clean cover; • FR Touch and close fastening cover; • Interlock FR AST buckles; • Adjustable waist belt; • Detachable crutch strap; • Integrated deck safety harness approved to EN ISO12401; • All straps and belt in FR AST webbing. Color: Silver. Buoyancy: 294N.
Harness with two attachment points: on the back and on the chest. Chest and back attachment point using D-ring. Leg and shoulder straps adjustable. Ideal for welding as raw material is Kevlar fabric blended with highly durable, heat resistant and flame retardant modacrylic fibres. Available in S, M/L or XL.
Double safety line of 2m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Suitable for wall mounting. Can be ordered with 3 way 1002713 and 1014794 output clutches. For use with compressed air hoses with maximum length of 10m.
Double safety line of 1,5m with large hooks (50mm) for welders. Protection of damper against heat and combustion, up to 371°C. Straps reinforced with Nomex/Kevlar which provides protection against combustion.
Foot loop that can be deployed after a fall to remove pressure from the groin and avoid suspension trauma after falling. Flam retardant version. No PPE.
Multinorm fluorescent bib pants with arc flash protection: Flame-retardant treated waterproof cloth; Premium flame retardant reflective striping; Taped seams provide extra protection; FR cotton lining for extra warmth and comfort; Flame retardant buttons and zipper; Adjustable straps with a durable buckle closure; 4 storage pockets. Quality: Modaflame Rain. Available sizes: S-2XL. Available colors: Hi-Vis yellow / Navy and Hi-Vis orange / navy. Conforms to: EN ISO 11612 A1, A2, B1, C1, E3, F1, EN ISO 11611 class 2 A1 + A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 class 2 APC 2, EN ISO 20471 class 3, EN 13034 Type 6 and EN 343 class 3: 1.
With a silicone rubber coating on both sides. Resistant to a very high mechanical load, thermal and electrical influences. Resistant to most acids and alkalis, dirt and oil repellent, good electrical insulating properties. Contains no asbestos. Short-term temperature resistance up to 600°C.
Women's multinorm trousers LESHA with arc protection: Concealed button placket / Zipper fly; 2 inset pockets; 1 patched thigh pocket; 1 stick meter pocket with flap; 1 patch back pocket with flap; elastic waist; knee pockets; Waist with belt loops; Flame retardant reflective stripes (70mm). Quality: Sio-Safe™ Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 gsm. Available sizes: 36-56 ladies. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1- ATPV 15.2 cal/cm², EN ISO 11612 : 2015 / A1A2B1C1E3F1, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / Class 2.
Protection of neck and ears in Tecaweld for Speedglas 9100. Not separately certified as PPE.
Screen carrier made of heat resistant plastic, type S57. Suitable for attachment of face shields s59/s603/s605/s613/s615/s760. This screen carrier can be attached directly to the 30 mm slot on the helmet using adapter BILSOM 3712 (not included). With the addition of a BILSOM hearing protector, a combination head-hearing-face protector can be created.
Hi-vis rain jacket ARC protection Class 1, SIO-SAFE Aqua 310: 2-layers laminated tissu: 60% FR modacryl - 40% cotton (<(>&<)> AST) ripstop with PU laminate ± 310 g/m², High performance laminated fabric, Highly breathable, Taped seams, Different linings/fleeces can be zipped in, Straight collar, Provided for hood (hood available seperately), Zip closure under flap with touch <(>&<)> close fastening, 1 patched chest pocket, 2 patched pockets, 1 napoleon pocket, 2 loops for badges, Round inset sleeves, Elastic at end of sleeves with narrowing by touch <(>&<)> close fastening, Back length 85 cm (L), Fixed flame retardant cotton lining, 1 inside pocket, Zipper in back lining for placing logos.
Helmet hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Flame retardant Hi-Vis softshell jacket, very comfortable. Non-metal, wind and water-repellent and with a high arc standard. Ergonomically shaped to work with arms raised. With comfortable heat seal reflection. Concealed zipper front and double storm flap with press buttons. Left breast pocket with flap. Right chest pocket with zipper and loop for telephone cord. Headset holder in the collar. Side pockets with zipper. Left sleeve pocket with flap, concealed key ring and loop for ID pocket. Cuffs on the inside of the sleeves. Tunnel cord bottom of jacket. Quality: Windtech FR 340, 340 g / m², wind and water repellent. Available sizes: XS-4XL. Available colors: Fluo yellow / navy. Compliant with: EN ISO 11612: A1 B1 C1 F1, IEC 61482-2: APC 2, EN 1149-5, EN ISO 11611: CL.2 A1, EN 13034: TYPE PB [6], EN ISO 20471: CL.2 * (XS-S) CL.3 (M-4XL).
Odour filter that removes unpleasant odours. Does not provide protection from gases or vapours, only improves comfort. If gas filter s are already being used, it is unnecessary to use an odour filter. Can be used in combination with the Adflo motor unit. Suitable f or: processes involving chemical risks.
Protection sleeve breathing hose Adflo. No PPE.
Automatic welding helmet from the 9100 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks with headband. Adjustable air stream. Cassette not included.
Welding bumpcap from the 9100 MP Lite series in durable, lightweight material. Delivered with Adflo PAPR but without cassette.
Work trousers with concealed zip, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insert at crotch to prevent tearing out, reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, cornflower blue / navy, gray / red and gray / blue. Conform: EN ISO 11611 class 1, EN ISO 11612 A1A2B1C1E2F1 and IEC 61482-2 class 2.
The Mulitnorm Bicolor Work Pants protect against various residual risks from the work environment. Quality: 74% Cotton / 25% Polyester / 1% Carbon, 320 g / m² Available colors: Fluo yellow / navy. Available sizes: Size range 42-66 NL. Conforms to: EN 1149-5: 2008, EN 11611: 2015, EN 13034: 2005, EN ISO 11612: 2015, EN ISO 20471: 2013 Class 1, IEC 61482: 2009.
Welding trousers Bizflame FR06: 100% Metal Free; Protects against radiant, convection and contact heat; Certified against molten metal splash; Industrial wash at 75°C and machine dry 155°C; antistatic; Flame Retardant Industrial Washable Striping; knee pockets; 8 storage pockets. Quality: Bizflame Ultra: 80% Cotton, 19% Polyester, 1% Carbon Fiber 340g. Available sizes: 30-46 PW. Available colours: Royal blue and grey. Complies with: EN ISO 11612 A1+A2, B1, C1, E2, F1, EN ISO 11611 Class 1 A1+A2, EN 1149 -5, IEC 61482-2 IEC 61482-1-2 Class 1 and EN 13034 Type PB [6 ].
Made from high-quality environmentally friendly silicates and provided with a mineral-based coating to minimize fraying and strengthen the fabric. Suitable for horizontal use at high temperatures. Short-term temperature resistance up to 1300°C.
Magnifying welding glass for Speedglas G5-02 series.
Complete work lamp for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01, including light, protective glass, cable / mounting parts and a long cable. No PPE.
Replacement front cover for the flip-up part of the 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01.
Top quality welding glove made of black analyne leather on palm and back and lined cuff of 15cm in super split leather for even better heat resistance. This glove is super comfortable and has a good dexterity. The palm is extra reinforced, which increases the durability of the glove. With kevlar seams.Glove can be used for MIG/MAG and electrode welding. Available color: black/gold Available sizes: 10, 11
Output for 2 persons / compressed air hoses to be installed on Sundström filter system.
Automatic welding cassettekit 9100XXi with three automatically darkening welding filters. Width of welding filter: 73x107mm. Battery life: 2000 hours.
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 TW, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Complete kit with Speedglas heavy duty welding helmet G5-03 Pro Air grinding hood under welding hood, with welding filter G5-01/03 VC, Adflo particle filter and Adflo motor unit, and carrying bag. (without safety helmet adapter)
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Welding shield for attachment to helmet. Hinged, includes clear polycarbonate lens.
