BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
A softshell is a smooth, comfortable jacket that is also water-repellent and windproof. The material is made of a woven polyester. The use of a PU intermediate layer ensures that the breathability remains optimal and you do not sweat. The stretchable fabric ensures that you retain your freedom of movement. The softshell contains stretch for extra comfort. The jacket is also more visible through the reflection piping on the chest. This garment has a laminated zipper for a luxurious look. The bottom of the jacket can be adjusted by means of an elastic cord with stoppers and the cuffs can be adjusted by means of Velcro. The Softshell has four pockets at the front and therefore offers plenty of storage options. This jacket also has an inside pocket that can be used for storing the phone or MP3 player. Fabric: 94% polyester, 6% spandex, plain weave, PU MEMBRANE, 340 g / m². Available colors: navy, black and gray. Available sizes: XS-3XL.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Tunic, polyester / cotton, 195 gr./m², height 80 cm and short sleeves. Available sizes: 0-6. Available colors: navy, wine and zinc.
The Hi-Vis class 3 BasePro chainsaw pants have been developed to offer the highest possible protection against frontal chainsaw according to the EN 381-5 standard: Zipper and 1 button closure; 2 deployed pockets; 1 patched back pocket with zip; 1 patch pocket for pleoimeter and system for fixing the spark plug key; Elastic waist with loops for belt and loops for suspenders with velcro; Lumbar top with suspender loops; 3-needle stitching on the back to the cross. Quality: 65% PES / 35% cotton. Available sizes: S-3XL. Available colors: FLuo yellow / black and fluorescent orange / black. Compliant with: EN ISO 20471: 2013 + A1 2016 / Class 2, EN 381-5: 1995 / Class 3 - 28 m / s design A and EN ISO 13688: 2013.
The light and elastic Herford coverall has a fixed hood, a zipper concealed under a double flap with press studs and sleeve and ankle narrowing by means of press studs. The durable Flexothane® fabric protects you against rain and wind. Moreover, this smooth coverall is machine washable. Available sizes: S-3XL. Available colours: Green and navy.
Low shoe in waterresistant brown full grain leather, with a metallic antiperforation sole and synthetic 200J toecap. Fitted with a b reathable, abrasion resistant liner in textile 3D. Outsole in PU double density, SRC antislip, oil and carburant resistant. Removable, Polyjal polyurethane insole with textile layer. Sizes: 38-47.
Extremely flexible goatskin work glove, designed for tough, hot working environments. Upper reinforced with heat resistant meta-aramide fibres and reinforced knuckles. Inner hand lined with para-aramid, which also provides cut protection level B, and reinforced externally for enhanced protection. Heat resistant double stitched seams. Sizes: 7-12.
Cottover hoody with ribbed cuffs and bottom hem. Inside of the hood in single jersey. Two front pockets. Quality: 80% organic Fairtrade cotton, 20% recycled polyester, 280 g / m². Available sizes: S-4XL.
Overshoe in nonwoven PP with strong anti-slip sole in PVC. Color: white on top and blue on the sole. Size: 170 x 410 mm, no PPE.
Flame retardant, anti-static hi-vis bodywarmer Vikja: Straight collar; Zip closure under flap with touch <(>&<)> close fastening; 2 patched pockets; 2 loops for gas detectors; 1 Napoleon pocket. Quality: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m². Available sizes: S-3XL. Available colours: Fluo yellow/navy and fluo orange/navy.
White clog made out of microfiber with steel toecap. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Black clog made out of microfiber. Textile lining. PU sole. Adjustable ankle-strap. Insole made out of fleece ESD. Sizes: 40-48.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
DuPont™ Tychem® 2000 C Sleeve model PS32LA. Stitched and over-taped seams. Yellow.
Welding glove in cowhide split leather, with Kevlar seams. Sizes 812.
Corresponding dispenser(s): 1054720 or 1060911.
Beannie Result: 100% knitted soft feel acrylic; short fashionable model; reversible; with contrasting color on the bottom edge and inside.
Short zip sweatshirt in metal and ribbed cuffs and hem. Two front pockets. Quality: 80% ecological Fairtrade cotton, 20% recycled polyester, 280 g/m². Available sizes: S-4XL.
Hi-vis sweatshirt PW277: Knitted cloth with brushed back; neck protector; ribbed cuffs; Knitted Hem; Certified to EN ISO 20471 after 50 washes; UPF 40+ fabric blocks 98% of UV radiation. Quality: 65% Polyester, 35% Cotton, 300g/m². Available colours: Fluo orange/black <(>&<)> fluo yellow/black. Available sizes: S – 4XL. Complies with: EN ISO 20471 class 2.
Flame retardant and anti-static hi-vis waistcoat: V-neck; Zip closure; Without sleeves; Flame retardant reflective tape (50mm); Back length 70 cm. Quality: 98% polyester + 2% AST; ± 120 g/m². Available sizes: S-3XL. Available colours: Fluo yellow and fluo orange.
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-600 and TR-800.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with breathable liner in 3D-textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Low shoe in waterrepellant microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in polyester. Outsole in EVA/Rubber, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
The INUTEQ-DRY® Bodycool Smart is a high-quality cooling vest based on evaporative cooling. Simple to activate by filling with max. 500ml clean water. The cooling effect can last from 8 hours to up to 3 days, depending on the ambient temperature, humidity and amount of airflow on the body. Available sizes: XS-XXL Available colours: black, gray and yellow
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .
Comfortable and lightweight plastic safety glasses with patented adjustable nose bridge, of which the nose bridge can be put in 3 po sitions in order to achieve the best possible fit.
Set of 20 replacement earplugs for 3M 1311 for banded earplugs 3M 1310.
P2 dust filter from 3M for direct connection to 3M half and full face masks. Protects against harmful dust, mist and smoke particles .
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
High visibility disposable coverall in TYVEK® (type 5/6). Coverall with collar, reflective striping on the shoulders, chest, arms and legs. Elasticated waist, ancles and cuffs, zip closure. Available sizes: S- 3XL. Available colour: hi-vis orange.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Level F cut resistance. Protects from glass, blades and abrasions. Protection against contact heat up to 100°C. Crinkle latex grip offers excellent grip. Reinforced thumb crotch for extra protection and durability. Superior strength and comfort. Reflective label for improved visibility .Breathable seamless liner 13 gauge liner for a perfect fit. Sizes 6(XS)-11(XXL). Conform: EN388:2016 3.X.4.4.F, EN407: X.1.X.X.X.X
Empty first aid kit box made of impact resistant ABS plastic. Domino(270 x 190 x 115 mm) for maximum 10 people. Suitable for all commercial buildings. Including wall mount.
Fall-prevention device, 1.5 metre webbing strap, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Only for vertical use.
Liquid-tight glove in jersey with high-quality neoprene coating, 45.5 cm long. Provides high mechanical resistance and is resistant to a wide range of chemical products. Hence the great demand for this glove from the chemical and petroleum industry, the transport sector and companies that work with hazardous substances.
Male rectus threaded coupling for equipping V-500, V-100 and V-200 with male coupling.
Escape hood with COP2 filter, provides protection against smoke from fire, among other things. Easy to put on, even for people who wear glasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in sealed two-part wall box. Dimensions: h x w x d 28.5 x 15.5 x 12.5. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Refill for first aid panel: wound cleaning wipes (3227).
Anti-static absorbent pads measuring 41 cm x 51 cm. These light-weight perforated pads are packaged in a box. Packaged per 200 piece s. The wipes are made from 1-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 166 litres.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these pillows as chemical waste. Absor bent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
Headband suitable for Speedglas 9100 welding helmet. Includes attachment set. Not separately approved as PPE.
Standard casing for hand wheel valves. Not PPE.
Battery set 2 items.
Mandatory sign - Safety gloves mandatory in self-adhesive polyester. Dimensions diameter: 100mm. Not PPE.
Absorbent pads measuring 7.6 cm x 366 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. Ideal for the absorption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. The great flexibility of the socks allows them to be easily placed around machines. Absorption
ALLWIK® Pillows feature a dark spunbond outer covering filled with gray polypropylene. Versatile - for use with all oil and water-based fluids.
High shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Long wearing comfort with reusable and detectable earplugs. Made from high quality material which uses the heat of the body to mould to the shape of the ear canal. SmartFit detectable earplugs are equipped with a metallic cord to prevent loss. The blue colour also adds visibility to avoid pollution in the food sector. Available in: blue.
Replacement hood for hood S-657.
Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Safety helmet made of ABS. With 4-points suspension 'Fas-trac' in textile (52-64cm), with a wheel and highly absorbent textile sweatband. Vented. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange, gray, black. Weight: 400g.
Braces as spare spart for motor unit Versaflo. No PPE.
Leather belt to link the connection hose from the demand valve to the compressed air hose coming from the filter system in order to prevent the mask from being pulled off. Couplers to be ordered separately.
Fire resistant protection seal for breathing tubes BT. No PPE.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
Dispenser with 500 pairs of disposable earplugs suitable for lower noise levels. The conical shape allows the earplug to be introduced into the ear canal easily, where the foam will expand to the ear canal's individual shape. Simply turn the knob at the bottom of the dispenser and the earplug will be dispensed into your hand. For the sake of hygiene, the container is replaced in its entirety. All Moldex products and packaging are 100% PVC-free. Wallholder available (SAP 1001186). MelLows SNR = 22 dB
Spray for the cleaning and rinsing dust and dirt from eyes and wounds. The spray provides a gentle stream of moisture and has a total rinsing time of 5 minutes. The spray can be used several times and is sterile to the last drop. Contains 150ml sterile saline solution 0.9%NaCl. Environmentally friendly propellant. Fits in the first-aid station.
Adapter for helmet, suitable for acetate and polycarbonate visors of Centurion. Not approved as PPE.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Replacement inox knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Bandage scissors for cutting bandages or tape Material: stainless steel. Matt Silver - can be sterilised. Dimensions: 14 cm
