BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Insole which emits heat for 7 hours after packaging is broken. Not PPE.
Long winter cap (shoulder length) in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides. Flame-retardant properties.
Heating kit that provides heat for 10 hours after packaging is broken. To be used in combination with helmet caps; These warmers can also be used in gloves.
Short winter cap in 2 layers of cotton to be worn under safety helmet in extremely cold conditions. Features reflective strips, with space for a cap warmer on both sides.
Cooling Towel: Dampen this synthetic chamois to create a cooling aid significantly colder than ambient air. Advanced PVA material holds water without feeling heavy. Super-evaporative, feels significantly cooler than ambient air.
This PCM CoolOver offers constant cooling and heat stress protection for professionals who need expert cooling underneath protective clothing in (extreme) heat situations. Reactivation is fast and easy; simply put the PCM CoolOver in ice water, freezer or fridge, or just store it at a 3ºC or lower temperature until the CoolOver liquid becomes fully solid. This 21C° PCM CoolOver provides long lasting cooling comfort and protection against heat stress for up to three hours, even during s trenuous activities in high-temperature environments. Available sizes: Universal Available colour: Yellow.
This PCM CoolOver offers constant cooling and heat stress protection for professionals who need expert cooling underneath protective clothing in (extreme) heat situations. Reactivation is fast and easy; simply put the PCM CoolOver in ice water, freezer or fridge, or just store it at a 3ºC or lower temperature until the CoolOver liquid becomes fully solid. This 24C° PCM CoolOver provides long lasting cooling comfort and protection against heat stress for up to three hours, even during s trenuous activities in high-temperature environments. Available sizes: Universal Available colour: Yellow.
"Ice" at a constant temperature of 15˚C. These extra cold 15˚C cool packs are mainly used for pre-post cooling of athletes and to cool down after an injury or after medical treatment. Or for someone who just really likes a low temperature cooling on the body. th only REACH registered and USDA certified 100% bio PCM on the market!
Evaporative Hard Hat pad with cooling towel.Advanced PVA material activates easily and quickly when run under water for one minute.Hook and loop closures connect to hard hat suspension system.Conveniently attaches to hard hat suspension headband .Reusable, just re-wet. No PPE.
Set of 4 cooling inserts for the INUTEQ PAC 21°C cooling vest (Art. 1037600). The bio-based packs contain a special Phase Change material that sets at a temperature of 21°C. They are very durable, reusable and 20% lighter than water. Furthermore do they not produce any condensation. Available colour: yellow.
Flip-Top winter gloves with optimal dexterity with removable fingertips.
Evaporative Cooling Vest: Soak in cold water, and enjoy cooling relief and comfort. With V-neck with zipper closure, nylon outer layer, polymer-embedded fabric inside, water-repellent liner and black cotton- poly elastic trim. Washable.
The N-Ferno® 6860 Winter Hard Hat Liner has 2 layers of insulation with a FR modacrylic/cotton blend shell and a soft polyester fleece lining for exceptional warmth. This lightweight thermal liner is chin-length to keep head and ears covered and fits comfortably under helmets or hard hats without feeling too bulky. Please note this garment is not entirely fire-resistant.
Set of 4 cooling inserts for the INUTEQ PAC cooling vest (Art. 1034426/1037600/1038010). The bio-based packs contain a special Phase Change material that sets at a temperature of 29°C. They are very durable, reusable and 20% lighter than water. Furthermore do they not produce any condensation. Available colour: red.
Premium Low Profile Hydration Pack Chill-Its®: Lightweight and low profile, this portable water source offers unique features to help keep workers hydrated and safe. Features: - Durable 600D water-resistant rip stop polyester shell; - Vented shoulder straps and back for maximum breathability; - 8mm EVA foam padding on shoulder straps for added comfort; - One zippered compartment, multiple d-rings and nylon daisy chain webbing for gear storage; - Reflective accent for higher visibility; - Insulated pack and tube keeps water cool; - 100% anti-microbial bite valve with cover to protect against contaminants; - Breakaway shoulder straps for added safety; - DualCap bladder featuring smaller (60mm) cap nestled into larger (80mm) cap for easy water and ice filling; - Capacity: 3L (3000mL) / 101oz / 3.3 hours.
2-Layer FR Hook <(>&<)> Loop Mouth Piece: Adjustable face protection that fits perfectly with an FR winter liner.
2-LAYER THERMAL MOUTHPIECE – Attaches to all N-Ferno® Winter Liners (sold separately) with hook and loop attachment straps for full-face coverage. WATER-RESISTANT OUTER SHELL – Breathable 1mm neoprene construction to trap heat in. WARM LINING – Soft fleece for additional comfort Machine Washable.
