BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Durable, heat resistant Kevlar glove with heavy coton liner, 35 cm long. Cut resistant and isolating till 350°C.
Delineation tape in yellow/black with a length of 100M, with of 80mm.
emporary, horizontal safety line made of polyester webbing with a maximum length of 20 metres. Safety line can be stretched between twopoints with line tensioner. Includes two carabiners and anchor points inthe webbing, one metre from the ends, for attachment to all sorts of constructions. Sold in handy storage bag. May be used for fall protection for two people.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Replacement blades for knife Cartonax, straight. Thickness: 0,30 mm. No PPE.
Safety helmet with slide adjustment, short peak, made of strong ABS, with 6-point textile interior (51-63cm) and highly absorbent hydro-flock sweatband. Non-ventilated. With European 30mm slot for attachment of hearing and face protection. With UPDATED built-in face shield that easily slides over glasses. Mark A, optical class 1, with easy to operate side-pieces. Anti-scratch and anti-vapour coating. Colours: white, yellow, blue, red, green, orange, black.
Baseball bumpcap with reduced peak (25mm) and ABS protection. Sizes: 52-65cm.
Cover for TR-600 and TR-800 to be combined with filter TR-6110E and TR-6130E.
Protect your hearing and listen to the radio at the same time. Excellent FM-reception. Extra wide, padded headband that divides the weight and 2- points suspension with low pressure for long lasting wearing comfort. Soft ear cushions filled with foam and fluids. Battery life: around 40 hours. Audio input for mobile phones, MP3 players and communication transmitters£. Weight: 350g.
Flame retardant and antistatic hi-vis softshell jacket in 100% polyester with FR PU membrane and inherent FR fleece (400g/m²). Zip closure under flap with velcro, straight collar, 2 inset side pockets, 1 chest pocket with zipper, 1 inside pocket, cuffs adjustable by velcro, 1 loop for ID badge, detachable sleeves, length back: 75cm, stitched seams. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Laces, black in polyester. Length: 75cm. No PPE.
Lens cleaner spray B412 with aqua formula, Alcohol and Silicone free. Suitable for all types of lenses. Anti-bacteria, anti-static and anti-reflective. 500ml.
Crowd control helmet made of flame-resistant aramid fabric with special selfextinguishing lacquer with Nomex lining and 3-points chinstrap. Has a clear PC visor with anti-fog (inside) and anti-scratch (outside) and PU-Kevlar neck protection. Ideal in combination with HM50 mask. Weight: 1500g.
DuPont™ Tyvek® 500 Labcoat with zipper model PL309NP. Labcoat with collar, available in white and in sizes SM to 2X. Zipper closure. Without pockets. Elasticated cuffs (tunnelled). Stitched internal seams. Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added. Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others. Available sizes: S-2XL. Available colours: white.
High boot in waterresistant full grain leather. Fitted with a Sympatex liner. Outsole in 100% rubber, oil and carburant resistant. Removable, antibacterial polyurethane insole. Sizes: 35-50.
Low safety shoe in velours leather with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Compact and extremely light safety knife for left-and right-handed persons. Glasfibre reinforced plastic hande and strong blade gives it a remarkable robustness. For cutting single layer cardboard, film and packing tape. The 2 cutting edges are safeley concealed to protect fingers. No replaceble blades available. To order by 10 pieces. No PPE.
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Hi-vis offshore trousers Ambok with arc protection: Front closure with zip; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Knee pockets; Waistband with loops for belt; Double stiched (2x2) flame retardant reflective striping (70mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44 - 64, 48S-58S and 46L-56L. Available colors: Fluo yellow/navy.
This durable and multifunctional arc coverall features six different pockets on the outside and one on the inside. This model with d ouble-stitched reflective FR strips is made from a very light fabric weighing only 260 g/m². At the same time, the fabric is very breathable and supple, flame-retardant, anti-static and offers you excellent protections against heat and metal splashes. For extra comfort and a good fit the waist can be adjusted, the sleeves can be narrowed by using press studs and knee protection can be pushed into the knee pockets. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Navy. Available sizes: 44-64.
High safety shoe in microfiber/textile with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Earmuff for helmet, used with V-GARD helmets. SNR: 36dB.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue.
Flame retardant and antistatic long sleeve t-shirt in 60% modacrylic l/ 38% Lyocell / 2% polyester. Cool and comfortable material, regulates body temperature. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Low shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole. Sizes: D, 36-48 / XD, 39-48.
Retractable hose (525-850 mm) in PU for Adflo motor unit.
Fireproof Blanket fiberglass. Size 180 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipes are made from 3-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for abso rbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 112 litres.
Protective shield for head and throat made of Tecaweld, a mix of 75% cotton and 25% Kevlar fibres. Tecaweld is more resistant to fla mes and molten metal and is also very flexible and durable.
Universal anti-fog visor made of cellulose acetate. Shape 1: width 450 mm, height 200 mm and thickness 1.15 mm. For mounting on Lunar and Monteclipso.
Apron 90 cm wide, 120 cm long, with reinforced front patch, duotex: 100% polyester fabric with PVC coating, 300 gr/m²
Fall-prevention device, 10 metre galvanised steel cable, with external shock absorber. Housing made of plastic. Serves as connection between anchor point and harness. For vertical (max 140kg) and horizontal (fall factor 1, max 100kg) use, and suitable to use with sharp edges. Weight: 6.6kg. Dimensions block: 39cm x 17.2cm, width 8.7cm Can be maintained.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Yellow first aid kit (bilingual) with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with ARAB guidelines (Multi), Resc-Q-Assist Colour System, NL and FR colour guide, wall holder, content table in NL and FR. Version: Multi.
Dispenser for EAR earplugs (excluded) for one-time use (refill: 1001007, 1013077). Simple to operate with a simple twisting action. Made of 100% recyclable material.
Double lanyard length 1,5 meters. Elasticated line, on one side a standard snap hook and on the other side scaffolding hook Maxitube.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant textile liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49 (L) en 41-49 (XXL). general industrial applications.
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
Low shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-49.
Comfortable bump cap made of maintenance friendly and breathable DuPont Teflon polyester, with modern 'casual' baseball cap look. Has a wheel ratchet. Full peak. With woven ventilation opening on top panels. Size: 54-62cm.
BasePro chainsaw jacket: The outer fabric is composed of a regular polyester cotton fabric, perfectly suitable for temporary or seasonal forestry work. The BasePro chainsaw jackets, which are the most economic pair of SIP Protection jackets of the range, still provide the comfort you want, the protection you need and the quality you expect from SIP Protection. Quality: Water repellent 65% Polyester - 35% cotton outer fabric, 210 g/m2. Available sizes: S-4XL. Available colours: Orange/grey.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Multinorm hood Diablo 12498.
Ladies' t-shirt long sleeves in organic cotton with a crew neck, double-stitched ribbed neckline and side seams. Quality: 100% ecological Fairtrade cotton Available sizes: S-2XL.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
These slim fit trousers with cut protection level D at the front: Slim-fit design; thigh pockets; Velcro closure; Double stitched seams; 6 storage pockets. Quality: Outer fabric: 98% Cotton, 2% Elastane 255g Contrast Cloth : 42.5% HPPE, 21.3% Glass, 21.3% PET, 14.9% Nylon Available sizes: S-3XL. Available colours: Black. In accordance with: EN 388 - 1.5.4.2.D.
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in PU/Nitrile, resistant to 300 ° C. Removable, polyurethane insole with textile layer. Sizes: 39-47.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in Impulse Foam/rubber, resistant to 300°C. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Black boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
Perforated, absorbent black sweatband made of nylon for Centurion safety helmets Reflex, 1125 and Vulcan.
Hairnet, polypropylene, flap, covers the ears. Available in: White.
Low shoe in high quality waterresistant bovin leather with an Air Toe aluminium toecap and non metalic antiperforation outsole Safe & Flex Zero+. Outsole in PU/PU with perfect grip and selfcleaning traces, lightweight, oiliresistant and antistatic. Energy absorbing heelpart. Liner in 3D material, with moisture regulating cell structure. Removable and ergonomicaly formed insole in foam with memory effect, made out of Elastopan by BASF. Sizes: 35-48.
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
Low shoe in black full grain leather. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in PU/rubber. Sizes: 35-51
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Nylon locking system. Non-conductive locking system with space for 6 padlocks. Can withstand a weight of 450 kg but weighs only 30 g. Not PPE.
Cable locking system + metal cable with vinyl coating (2.44 m). Not PPE.
Jacket, ME - 75% cotton 24% polyester 1% antistatic, 2/2 twill weave, 360 gr/m², covered press-stud fastening, 2 front pockets with flap, breast pocket with flap, inside pocket, back pleats, sleeves with adjustable press-studs.
Hi-vis rain jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / 2 patched pockets / Raglan sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Classic: / 100% polyamide knitting with PU coating; ± 180 g / m² Colour: 3720A2FC1: FC1 fluo orange3720A2F01: FY1 fluo yellow
Reversible bib <(>&<)> brace trousers / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Elastic braces with buckles on front and back / Legs adjustable by press studs / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6 with PU coating; ± 170 g / m² Colour: W02 white
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
P filter for motor unit Versaflo. Protects against highly toxic dust, mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. Odors only if concentration below the MAC value. NO protection against gases, only comfort.
Spark catcher as accessory for motor unit Versaflo. No PPE.
Ceramic rolling cutter for right- and lefthanded users. To avoid cutting yourself. Suitable for cutting hard plastic. Pas d'EPI.
Safety glasses with transparent frames with anti-slip arms and anti-slip nose-bridge. Lenses in grey polycarbonate with an anti-scratch and anti-vapour layer. Free glasses cord.
