BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Rainwear set with jacket and pants in PU quality. • Wind and waterproof • Water column: 11,000 mm Quality: 50% Polyester, 50% Polyurethane, 170 g/m² Available sizes: XXS-5XL. Available colours: Black. Complies with: EN 343.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in Gore-Tex. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Very thin nitrile glove (0.20mm) for maximum finger feeling, with grip pattern, unflocked, close fit. Protects against hazards such as aggressive acids, oils and strong detergents.
Air regulator in Zytel (glass fibre reinforced polyamide) on belt for use in combination with 3M air hoods with bayonet coupling.Fitted with pressure reducer that eliminates any pressure fluctuations from the compressed air line, which provides improved comfort because the airflow remains constant. With regulator to adjust the air flow in the airhood. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 3.5 - 8 bar. NPF: 50 with M-100 and 200 with all other compliant hoods. Minimum airflow 170 l/min, max. 305 l/min.
Filter holder for use in combination with dust filter holder 501 for direct connection of dust filters 5911, 5925 and 5935 to 3M hal f and full face masks.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against organic vapours < MAC value thanks to active carbon layer. NPF: 4.
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours.
Delineation tape in yellow/black with a length of 100M, with of 80mm.
Air hood with safety helmet PC/polyester with hinged visor and fire resisteant Nomex full neck protection. Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit, Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For more demanding applications. Respiration, face and head protection in one. Weight: 845 g. NPF: 200 with compressed air, 500 with Jupiter or Versaflo.
Blue nitrile gloves for single use with roughened surface. Chlorinated interior for easy on and off. Reach compatible.
Level F cut resistance. Protects from glass, blades and abrasions. Protection against contact heat up to 100°C. Crinkle latex grip offers excellent grip. Reinforced thumb crotch for extra protection and durability. Superior strength and comfort. Reflective label for improved visibility .Breathable seamless liner 13 gauge liner for a perfect fit. Sizes 6(XS)-11(XXL). Conform: EN388:2016 3.X.4.4.F, EN407: X.1.X.X.X.X
Blue industrial paper roll, 100% recycled fibre. High tensile strength, more volume in the hand. High absorption. Dimensions: length 380 m x width 26 cm, 2 layers, 1000 sheets. For use with metal floor stand, art. no. 00330081.
Work floor in blue PE with black removable grid. Absorption capacity: 300L. Dimensions: 1660x1260x150mm. Suitable for 4 drums. Weight 38kg. Corrosion-resistant.
AX screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point under 65 °C, low boiling point substances of class 1 and 2. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / Washable at 95°C / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / Raglan sleeves / Elasticated wristband / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Kleen: / 100% polyamide knitting 6.6with PU coating; ± 170 g / m² Colour: W02 white
Standard fabric belt as spare spart for motor unit Versaflo. No PPE.
Safe Step avoids hang trauma after fall. No PPE.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Fall-prevention device, 10 metre galvanised steel cable, with external shock absorber. Housing made of plastic. Serves as connection between anchor point and harness. For vertical (max 140kg) and horizontal (fall factor 1, max 100kg) use, and suitable to use with sharp edges. Weight: 6.6kg. Dimensions block: 39cm x 17.2cm, width 8.7cm Can be maintained.
Antibacterial addition for tank eyewash stations and tank safety showers. Disinfects and preserves water for up to 6 months, dosing: 10 ml to 100 litres water. Content: 100ml, shelf life : 3 years. No PPE
Single-walled storage cabinet for propane gas bottles, model LG.2845 Outdoor storage of pressurised gas cylinders, in accordance with current rules and legislation. Protection against weather. Robust cabinet, made of hot dip galvanised steel for high resistance to corrosion. Perforated design for maximum ventilation. Single door. Lockable against theft and unauthorised access by means of cross-grip handle with cylinder lock. With rear wall, base grille, grille shelf and warning sign. Dimensions W x D x H (mm): External: approx. 840 x 690 x 1500 Internal: approx. 830 x 660 x 1470 Storage Capacity: 4 x 33 kg or 10 x 11 kg or 18 x 5 kg
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 1.5m. Anchor point for protection of one person.
Yellow first aid kit (bilingual) with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, well organised and more accurate! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape, temperature, dust and water resistant, maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in accordance with ARAB guidelines (Multi), Resc-Q-Assist Colour System, NL and FR colour guide, wall holder, content table in NL and FR. Version: Multi.
Lined finger-sensitive nitrile cap gloves with a grip coating according to the new Grip Technology. Very good physical properties and good grip even in oily and damp/wet conditions. Top finished with straight edging. Sizes: 8 / 9 / 10, Length: 280 mm.
Cover for TR-600 can be combined with filter TR-6710E.
Sports goggles with grey-black frame with anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. Twilight coating: used in low light conditions, improves the contrast. The transmission factor is ideal outdoors, especially in the morning and the evening twilight. Supplied without glasses cord.
Full face mask G1 with rubber headgear, successor to Ultra Elite mask, light, compact with wide field of vision on pc coated lens, and neckband. Improved air flow in the mask. Size medium, other sizes available on request, quick coupler, adjustable headgear, fully serviceable with voice membrane.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Lightweight air hood with inegrated bumpcap and fire retardant face seal, for work where there are sparkels or hot particles. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50 and compressed air, with Jupiter, NPF: 500 with TR-300, TR-600 and TR-800.
Metal detectable safety knife with concealed blade, especially designed for cutting film and plastic strpping band. The concealed blade and rounded nose reliably protects you and your products. It has perfect ergonomics and the blade change is made very easy.No PPE.
Low safety shoe in velours leather with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Low shoe in waterresistant, breathable Putek®, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 38-48.
P3 RD Elipse replacement filter for usage on Elipse Integra masks. Pack of 10 paires..
Ladies' t-shirt long sleeves in organic cotton with a crew neck, double-stitched ribbed neckline and side seams. Quality: 100% ecological Fairtrade cotton Available sizes: S-2XL.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Scratch resistant, tempered mineral glass for protection against welding spatter. Dimensions: 108x51mm.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
The Nibas is our cold storage bomber jacket with quilted lining that protects you to temperatures of -40 °C. The inner collar is finished in fleece. The sleeves are handy with knitted cuffs, a practical thumb hole and touch and close sleeve narrowing. For your comfort, the elastic waist can be narrowed using press studs on the sides. The shoulders are reinforced so that this bomber jacket is a durable and practical protective garment. Inside: Fleece inside collar, Provided for hood (hood available separately), Front zip closure under flap, 1 patched chest pocket with flap, 2 inset pockets with flap, 1 sleeve pocket + pen pocket, Round sleeves, Sleeve narrowing by touch and close fastening, Shoulder reinforcement, Elasticated waist and narrowing by press studs at the sides of the waist, Elongated back tail, Back length 80 cm (L) Fabric: 100% polyamide; ± 185 g/m² + hi-vis - 100 % PES ± 220 g/m² - Hi-vis Cordura: 100% polyester ± 210 g/m² Color: fluo yellow / navy. Compliant with: EN 342 + EN ISO 13688 : 2013
Trousers, 65% Polyester, 35% Cotton 245g, Back elasticated waistband, Kneepad compatible pockets, Multiple pockets for storage, These new trousers look smart and feel great. The modern contrast colouring is combined with useful features such as a mobile phone and pen pocket, knee pad pockets and adjustable Velcro hems. Compatible with the TX50 jacket.
Green plastic hearing protector with neck band made of combination of plastic and stainless steel. Allows simultaneous use of helmet s or other head wear. Universal size.
Retractable polycarbonate replacement visor, suitable for attachment toConcept Spectrum helmet.
Fireproof Blanket fiberglass. Size 180 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Super lightweight sportive spectacles (37g) in clear polycarbonate. Protective covering thanks to flat base curve. Lens inclination of 11° ensures good view downwards and provides the wearer safeness from stumble-accidents. Flexible frame with soft temples(XCT). With Supravision Clean coating coating: extremely scratch resistant, chemical resistant and easy to clean.
High shoe in black textile composed of high tenacity polyamide. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
Chin piece S91C, suitable for attachment to face shield S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate a nti-fog).
Comfortable waterproof gloves with multiple layers for extra protection. These gloves provide protection for the hands and arms against extreme cold and spatters of cryogenic liquids (liquid nitrogen). Indispensable for work in temperatures to -160 °C. Cryo Gloves are also extremely light and provide excellent tactility. Sizes: S / M / L / XL / length: 40 cm. Testing supports a Convective Cold level of 4 and a Contact Cold level of 2, but the Abrasion Resistance level of 1 allows reporting of Convective and Contact Cold levels of 1 only.
Absorbent pads measuring 41 cm x 51 cm. These light-weight perforated absorption pads are packaged in a box. Packaged per 200 pieces . The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ide al for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 166 litres.
Blue plastic work floor with black removable grid. Absorption capacity: 130L. Dimensions: 1260x860x150mm. Suitable for small packages. Corrosion-resistant. Weight: 20kg.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorbent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
Cable locking system + metal cable with vinyl coating (2.44 m). Not PPE.
Ceramic rolling cutter for right- and lefthanded users. To avoid cutting yourself. Suitable for cutting hard plastic. Pas d'EPI.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Headgear combination, including a clear polycarbonate face shield 5F-11 and earmuff Optime I. It provides a versitale and comfortable solution for wearers who require both face and hearing protection. Easy to combine withother 3M safety products such as face shields, passive earmuffs or communication headsets and integrated eyewear. Sizes: 54-62 cm. It provides good impact protection in combination with a wide field of view and high end user comfort.
Safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Fitted with standard carabiner and 1 ca rabiner hook with a 65 mm gate opening. Serves as connection between anchor point and harness.
Comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Plus coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and outside, antistatic and easy to clean.
Lined winter glove with reinforcments in PU palm. Wind-and waterproof membrane makes sure that hands stay dry and warm. Glove has touch screen on the thumb and velcro strap at the wrist. Protects up to -10°C. Sizes 8-12.
Green safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber for a good chemical resistance, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 39-48, 49/50.
Warm, insulating gloves with acrylic/nylon liner with PVC coating. PVC-foam coating stays flexible in cold temperatures, food approved. Industy leading combination of comfort, warmth and dexterity.
Low shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
Flame retardant and antistatic signaling polo, feels very soft, comfortable, good moisture-regulating properties, anti-bacterial, light, inherently flame retardant <(>&<)> antistatic, perforated reflective bands for increased wearing comfort, press-stud fastening, Long Sleeves. Quality: 60% Protex + 39% Viloft + 1% AST; ± 180 g / m². Available sizes: S-3XL. Available colors: fluo yellow / navy. Complies with: EN ISO 11612 A.B1.C1.F1, EN ISO 14116 index 3, EN 1149-5, EN ISO 20471 class 2 and EN 13758-2.
Low shoe with water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Softshell vest without sleeves: • two side pockets with zippers; • chest pocket with zipper; • two inside pockets; • hidden button band with chin guard on top; • adjustable waist. Quality: 96% polyester, 4% spandex. Available sizes: XS - 5XL. Available colors: black, navy, dark gray, green, sky blue and red.