BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Sandale in velours leather, with a synthetic antiperforation sole and synthétic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metalfree. Sizes: 35-50.
Holder with plastic blade, rectangular plastic scraper, to scrape surfaces without damaging them. Single holder supplied without blades. Offer with replacement blades: 1021522 for delicate surfaces
Low shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. 100% metalfree. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-1-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. Supplied with mesh visor (S59) and Baltic earmuffs. Colour: orange.
Polyethyleen/composite yarns knitted glove with double nitrile coating. First orange coating liquid proof full dipped. Second palm coating in black nitrile foam. Sizes: 6-11.
Ladies version of the T-shirt exact 190 with short sleeves: - pre-shrunk material; - 1x1 rib knitted collar; - double-needle stitched sleeves and bottom hem; - with side seams. Quality: 100% ring-spun jersey cotton, 185 g / m². Available sizes: XS-3XL. Available colors: White, black, navy, red, orange, sport gray, pacific gray, royal blue, purple, fucsia, rose, yellow, brown, pacific green, kelly green, etc.
Anti-fog spray with microfiber wipes. You can use the Artnog 100 times and the anti-fog coating is retained for 20 hours. This can be used on glasses that also have an anti-reflection layer. No PPE.
Earmuff for helmet, used with V-GARD helmets. SNR: 36dB.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
High shoe made of water-resistant full-grain leather with a scuffcap, which guarantees extra protection against wear. This shoe also contains a Goretex lining: the 2-component membrane regulates the temperature in the shoe and protects the feet against cold and water: the water cannot penetrate the shoe, but the moisture (sweat) can still be diverted to the outside. Aluminium protective toecap and synthetic antiperforation sole. Memory protective insole made of polyurethane and Elastopan thermosensitive memory foam from BASF, reduces pressure points, improves weight distribution and absorbs heel shock. Anatomical and perforated. Sole in PU/E-TPU/PU. Sizes: 38-47.
Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Rescue safety harness, easy to put on due to padding, easy-to-adjust straps, with revolving adjuster system on the chest straps, shoulder reinforcements with integrated anti-trauma straps, and large stand-up D-ring on the back, and quick closures. With 2 hooks on the shoulder straps for rescue from enclosed spaces (victim comes straight up), to be used with rescue harness spreader (art.1031078).
Fireproof Blanket fiberglass. Size 120 x 180 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Adaptor 3711VS for helmets with Centurion Connect slot.
Leather boot, with 2 loops to help pull boot on. GORE-TEX lining. The Softane 2-component sole allows for better slip resistance and is resistant to oil and hydrocarbon contact. This shoe offers great shock absorption. With a protective toecap in synthetic polymer, which makes the shoe lighter and a stainless steel anti-perforation insole. Sizes: 37-48.
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
For very strong to extreme soiling involving substances such as paint, resins and adhesives. With gentle solvents and Astopon® (refined walnut shell flour) and nourishing components Content: tube of 250ml PPE Category: not applicable. Previous name: Slig Spezial and Kresto Paint
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of full-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 315 x 200 mm.
Group Lock Box. Simplifies locking of large machines. Once the machine or process is locked, the keys are placed in the lock box. Each authorised team member secures a personal lock to the lock box. Not PPE.
XL VABON sweatband for safety helmet Vulcan from Centurion.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
This Plastic and Paper Sheet Cutter with concealed blade provides for swift and cutting accident-proof work. Designed for a whole host of applications: The Easysafe features a patented cutting head design allowing for easy initiation of the cut while maintaining blade contact with the material, even on single layers of film or paper. The piercing point allows for insertion of the cutter into all types of paper and plastic sacks. The integrated tape slitter safely cuts packaging tape without an exposed blade. The unit allows for an easy blade change 150; no tools required! The cutter is capable of being locked with a special key to change the blade. For use in the sensitive-products industries, e.g. food, designed to exclude hygienic risks resulting from unauthorized blade changes. No PPE. Blades: 1015780
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
High visibility poloshirt in 100% polyester bird eye knitted (175g/m²). Long sleeves, marine collar, 3 button closure, horizontal and vertical reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Seamless high cut resistant sleeve in HPPE with elastic cuffs on under and upperarm. Lenght 305 mm.
High shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
The ‘industry’ body warmer has a ‘fake fur’ lining . The body warmer offers extra visibility thanks to reflective piping on the front- and backside. De coating ensures rejection of dirt and water. The body warmer offer sufficient storage thanks to the chest pocket, two side pockets, two lockable flap pockets and a lockable horizontal side pocket. The bodywarmer is for 70% made of polyester and 30% of cotton. And has the 250g/M2 quality. The body warmer is available in navy and black in sizes XS-7XL.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
The Urbino fleece sweater protects against cold and against the thermal risks of an electric arc flashover. The sweater with upright collar and hidden zipper was provided with an elastic hem and an elastic in the sleeve ends. As an added advantage, the soft fleece fabric was treated against pilling. Quality: Double-sided fleece: 54% Protex + 34.2% FR cotton + 10% polyamide + 1.8% AST; ± 310 g / m². Available sizes: S-3XL. Available colors: Marine. Complies with: EN ISO 11612 A1.B1.C2.F1, EN 1149-5, IEC 61482-2 Class 1, EN ISO 14116 and EN 14058.
Waistpants with great flexibility. Stretch fabric across seat, crotch and knees area to provide extra freedom of movement. Leg pockets with zipper. Back pockets with flap. Attachment for holster pockets. Hidden button at front. By unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
This sweater with a zipper collar is particularly shape and colorfast. The inside is roughened for extra comfort. Quality: 60% cotton / 40% polyester, American fleece. Available colors: Red, royal blue, navy, anthracite, black, lime. Available sizes: XS - 7XL.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
Flame retardant work jacket with a thin lining, making it compliant with arc IEC61482-2 class 2. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Tunnel cord in the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Entirely metal-free. Item is produced to order. The delivery time is approximately 5 extra working days. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Compliant with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.2 *, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6. * The back of the jacket is unlined and complies with IEC 61482-2 CL.1, Arc Rating: 9.5 cal / cm². The front has an art rating of 20.20 cal / cm².
Sweatshirt with: double hood with drawstring set-in sleeves rib knitted cuffs and hem with elastane stuffed kangaroo bag fashionable model knitted. Quality: 80% cotton, 20% polyester. Available sizes: XS-5XL Available colors: Black and navy.
Multinorm T-shirt Diablo: - Long Sleeves; - V-collar in contrast; - Raglan sleeves; - 2 angled bevel ref tires. Quality: 63% FR VISCOSE -32% NOMEX - 5% ELASTANE. Available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 Class 2, EN ISO 11612 A1B1C1F1, EN ISO 14116 and EN 1149-5.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Hi-vis offshore trousers Ambok with arc protection: Front closure with zip; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 1 ruler pocket with flap; Elasticated waist; Knee pockets; Waistband with loops for belt; Double stiched (2x2) flame retardant reflective striping (70mm). Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44 - 64, 48S-58S and 46L-56L. Available colors: Fluo yellow/navy.
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Flexible, well-fitting work glove in Guide HXFIBR™, a material that provides revolutionary cut protection and excellent tactile properties. The glove's nitrile coating provides a good grip. 15 gg liner and extra reinforcement along the thumb and index finger. Cut protection level D, approved for contact heat up to 100°C for max.15 sec. Approved for ESD and food safe. Oeko-Tex approved. Touch screen function. Sizes: 6-11. Complies with: EN388:2016 4.X.4.3.D, EN407: X.1.X.X.X.X
Low safety shoe in full grain leather with synthetic antiperforation sole and a steel toe cap. BOA-closing system. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Low shoe in microfiber, with a synthetic 200J toecap (amagnetic). Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-52 (widths: 10, 11, 12).
Low shoe in nubuck leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in leather. Outsole in MONO-PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-49.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. With clip-in frame. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Terylene suspension for Concept helmet with slip adjustment.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
Handy wall box in blue made of strong ABS for storage of safety glasses. Dimensions: L23,6 x W12 x H12 cm.
Curtain to guide water into 9009 drum during a shower test.
SP65 Axion eye and face wash system with adaptor for models 7260BT Axion, 7261 Axion, 7460BT Axion and 7461 Axion. Conform: EN15154.
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color orange makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
6 refills of Salvequick blue detectable plaster. Each refill contains 35 adhesive plasters: 21 of 72 x 19 mm and 14 of 72 x 25 mm. Suitable for Salvequick dispenser.
The AlphaTec® AquaDri® is made up of two layers to keep your hands dry and to improve comfort and performance. The soft foam coating inside with the Aquadri® technology developed by Ansell offers unrivalled moisture absorption. The superior nitrile film offers advanced chemical protection against accidental exposure to bases, oils, fuels, some solvents, fats and animal fats. The inverted diamond relief on the palm increases the grip on wet and dry objects for an optimum, firm grip in a wet or dry working environment.Antistatic, silicone free and food approved. Sizes: 7-11. Lenght: 38 cm.
Lined winter glove with fleece lining and PU palm. Safety cuff. Fully lined. Sizes 8-11.
Glove with PE and Zirnium. Extremely good cut resistance.
Waipoua Forestry combination with ABS helmet, earmuff and vizor. A flexible and comfortable solution for face and heariong protection in forestry. Convenient for: forestry. In accordance with: EN 397/EN 352-3/EN 1731
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU / TPU, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 35-42.
Reusable FFP Mask with a very low breathing resistance. AirWave® Pleated Filter for comfortable breathing and fatigue-free work. Longer use time, less consumption ProValve: Built-in valve, reduces condensation from exhaled air. Comfortable full-face seal made of washable TPE material which is gentle on the skin DuraMesh®: strong and durable structure, keeps the mask in shape. ActivForm®: no nose clip needed Length-adjustable loop strap with clip for quick, simple and safe on and off. Single packed, 5 pieces in box. Tested and certified to EN 149:2001+A1:2009 All Moldex products and packages are 100% free off PVC
Blue knitted food approved hydrofobe glove from the Revillet range (per piece) in polypropylen, polyester, stainless steel and glass fiber with knitted cuff. This glove has excellent cut resistance, tested according to TDM standard. Prewashed, to make sure it will keep its form after nex washing cycles. Washable and waterrepelant. Sizes: 6-11. Size 5,12 and 13 on demand.
The PW40 earmuff with high level attenuation designed to provide basic protection. Super economical, the over the head design provides maximum versatility for use with other PPE. SNR: 28dB In accordance with: EN 352-1
Suspension I/79GD-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ben and Bop. Not separately certified as PPE.
