BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Flame retardant shirt Rufford with arc protection: Lay-flat collar; Closure with hidden press studs under flap; 2 patched chest pockets with flap closed by concealed press studs; Round sleeves; Sleeve narrowing by press studs; Welded, segmented reflective tape. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g/m ². Available colors: Navy/fluo yellow. Available sizes: S-3XL.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Dust mask, class P3, for toxic dust. Form-retaining mask thanks to Dura- Mesh shell on the outside of the mask. Mask always retains itsshape,even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels ofCO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. The pleated filter technology reduces breathing resistance to 50%. Non reusable. Fitted with adjustable, elastic headbands with closure. packed per piece. NPF: 50.
Blue fitover safety glasses with pressure-free fit. Very light, fits over most prescription glasses. Frame in synthetic material and clear polycarbonate lenses with integrated side shields. The innovativetempleconcept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. applications. PCF (Product Carbon Footprint) = 0,25kg CO².
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads.
ABE2K1P2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K f ilter of class 1: for max. concentration of 0.1%.
Comfort facial seal as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307. No PPE.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and suspension with wheel adjustment. Helmet with slot for P3E or P3K adapter. Tested: molten splash metal (MM) and low temperature (-30°C).
Red life-jacket (inflates automatically), suitable for all waters and all conditions, e.g. extreme weather, when wearing heavy, protective, waterproof clothing. The jacket keeps you safe even during unconsciousness and will keep airways clear of the water.
6 refills of Salvequick blue detectable plaster. Each refill contains 35 adhesive plasters: 21 of 72 x 19 mm and 14 of 72 x 25 mm. Suitable for Salvequick dispenser.
High shoe S3 in black / brown full grain leather with a 200J plastic toecap and plastic anti-perforation sole. Lining in synthetic breathable 3D material. Comfortable insole in coolmax. Sole in PU / TPU. Sizes: 37-47.
Spark protector to protect filters against sparks.
The Kingsplit is a new RP glove made of heavy cowsplit leather, with split leather palm reinforcement. The gloves are lined and have a rubber reinforced cuff (10cm), elastic in the back and protection at the knuckles.
High shoe in velours leather, with a synthetic antiperforation sole and synthétic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 50.
Holder with plastic blade, rectangular plastic scraper, to scrape surfaces without damaging them. Single holder supplied without blades. Offer with replacement blades: 1021522 for delicate surfaces
Rain set, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams. Jacket: Fixed hood with drawstring, zip under storm flap with popper fastening, adjustable press stud fastening sleeves, 2 straight pockets. Pants: Elastic at the waist, 2 side pockets, adjustable press-stud closure at the bottom of the leg, 3M reflection. Complies with: EN 343, EN ISO 20471 class 2.
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU / TPU, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 35-42.
The ‘industry’ body warmer has a ‘fake fur’ lining . The body warmer offers extra visibility thanks to reflective piping on the front- and backside. De coating ensures rejection of dirt and water. The body warmer offer sufficient storage thanks to the chest pocket, two side pockets, two lockable flap pockets and a lockable horizontal side pocket. The bodywarmer is for 70% made of polyester and 30% of cotton. And has the 250g/M2 quality. The body warmer is available in navy and black in sizes XS-7XL.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Rainwear set with jacket and pants in PU quality. • Wind and waterproof • Water column: 11,000 mm Quality: 50% Polyester, 50% Polyurethane, 170 g/m² Available sizes: XXS-5XL. Available colours: Black. Complies with: EN 343.
Low shoe in mesh, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in EVA/TPU/Rubber, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Low shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 39-48.
For very strong to extreme soiling involving substances such as paint, resins and adhesives. With gentle solvents and Astopon® (refined walnut shell flour) and nourishing components Content: tube of 250ml PPE Category: not applicable. Previous name: Slig Spezial and Kresto Paint
Bomber jacket Calais S503: Waterproof and breathable with taped seams; Fully lined; inner pockets; adjustable cuffs; Ideal for corporate wear and personalization multi pocket; Concealed hood. Quality: 100% polyester pongee PU coated 100g. Available sizes: XS-3XL. Available colors: Black and Navy. Complies with: EN 343 Class 3:1.
Soft yet robust technical liner, engineered to offer protection against the cold and heat, as well as cut level A4/D protection Exceptional anti-wear properties and double protection against thermal hazards. Extremely durable latex coating with increased resistance around the thumb for extended use. Conform EN388:3X43D EN511: X1X EN407: X2XXXX
Natural latex glove, good grip, lined inner, freedom of movement: excellent comfort thanks to the textile inner (seamless work surface), very high tear resistance, very good resistance to various acids and ketones. Applications: Chicken breeding, vegetable cultivation, perfume production, polyester lining, masonry work, and ink and dye production. Length: 31 to 33 cm (depending on size). Thickness: 1.15 mm. Sizes: 5-10.
Black, nylon bag with reinforced zipper for sports-type glasses.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. Ideal for the abso rption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. The great f lexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on both sides a standard carabiner hook.
Easily adjustable positioning line made of kernmantle rope for useincombination with positioning belt, whether or not to not be integrated into the harness, in order to free the hands for other tasks. Includesaline shortener to adjust the length of the line to the specific work situation. With 2 hooks. Protective sleeve to protect the rope. Available in length: 2, 10, 20 metres.
Fully nitrile coated glove. Flexible and close-knit glove for excellent grip in wet and oily conditions. Unique: Also checked for food contact. Available in sizes: 7, 8, 9, 10 and 11.
Safety spectacles with wide field of vision and gray polycarbonate lenses, treated with an anti-fog coating. With soft temples and s oft nose bridge with a non-slip effect.
Ceinture avec boucle métale en polyester. Adjustable and elastic. length: 120cm. Available colour: black.
30m floating rope for lifebuoy.
Post and pedestal system to place Skipper unit (1044502/1044611), fits perfectly in any environment. The base can be filled with water or sand for extra stability and sturdiness.
High shoe in waterresistant oiled leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-49.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
High shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
The PW40 earmuff with high level attenuation designed to provide basic protection. Super economical, the over the head design provides maximum versatility for use with other PPE. SNR: 28dB In accordance with: EN 352-1
Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.
Shift work trousers with concealed zip, thigh pocket with concealed snap closure, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, 1 back pocket with concealed snap closure, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g/m². Available sizes: 44-66. Available colors: Charcoal gray / fluorescent yellow.
Flame retardant and antistatic nek protector in modacrylic/cotton/elasthane/antistatic fibre (300g/m²). Offers protection to the neck against molten metal splashes and flames. You can wear the neck protector in several different ways: around the neck, around the neck and head and to the bottom of the nose. Available size: 1 size. Available colour: navy.
Low shoe in waterresistant pull-up leather, with a synthetic antiperforation sole and carbon 200J toecap. Fitted with a textile 3D-l ining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Tunic, polyester / cotton, 195 gr./m², height 80 cm and short sleeves. Available sizes: 0-6. Available colors: navy, wine and zinc.
Bicolor softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Flame retardant and antistatic long johns in 60% modacryll/38% Lyocell /2% polyester. Cool and comfortable material, regulates body temperature, elastic waistband. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
Jacket in 65% polyester/35% cotton, 245 gr./m² , 2 patched pockets with flap . Industrial washable and dryable. Easy-fit: model with very comfortable cut. Available in: grey with marine blue contrast elements on the pockets, royal blue with marine blue contrast elements on the pockets, marine blue with royal blue contrast elements on the pockets.
Coverall, polypropylene / polyethylene with waterproof coating,elasticat wrists and ankles, elastic in the waist, zipper, hood. Available in white. Sizes: L - XXL.
Group Lock Box. Simplifies locking of large machines. Once the machine or process is locked, the keys are placed in the lock box. Each authorised team member secures a personal lock to the lock box. Not PPE.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
Easy-to-clean belt for TR-600.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Sandale in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
High visibility poloshirt in 100% polyester bird eye knitted (175g/m²). Long sleeves, marine collar, 3 button closure, horizontal and vertical reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
High quality cleaning tissues, microfibre. Highly absorbent. 2 x 200 tissues. Application: For refilling cleaning station: 2 boxes per station. No PPE.
High shoe S3 in black full grain leather with cut resistant lining, fitted with a steel toecap and metallic antiperforation midsole. Breathable textile lining. Outsole in PU/Nitrile, resistant to fats and oils. Fitted with a half scuffcap.
Comfortable half mask in TPE with integrated safety goggle and replaceable particle filters . Sizes: S/M and M/L.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
High shoe in water-repellent suede leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, a brasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
