BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Work trousers Millenia multirisk 12573 including: - 2 front pockets; - 2 back pockets; - 1 thigh pocket; - 1 meter bag; - knee pockets with cobra finnish. Quality: CO / PES / CF 79% / 20% / 1%. Available sizes: 42-64 BE. Available colors: Fluo yellow / gray and fluo yellow/navy. Compliant with: EN ISO 11611 class 1, EN ISO 11612, EN ISO 14116, EN 1149-5, EN 13034 type6 and IEC 61482-2 class 1.
Sporty goggles, OTG compatible and very wide panoramic view. Frame colour: anthracite/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. with: EN 166/ EN 170 2C-1.2 1 BT KN CE
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Lab coat suitable for ESD environments: UPF 50+ fabric blocks 98% of UV radiation; 3 storage pockets; Phone pocket; Velcro adjustable cuffs for snug fit. Quality: 65% polyester, 34% cotton, 1% AST, 210g / m². Available sizes: XS-3XL. Available color: white, light blue and navy. Conforms to: EN 61340-5-1 (2016) and EN 1149 (2018).
High visibility winter parka PW3: 5 pockets for more storage; Insulatex lining to reflect heat back into the body, ensuring maximum warmth and comfort; Removable lined hood; Quick-dry knit cuff; Zipped interior pocket; Zip closures under the armpits; Removable badge holder; The drawstring in the hem allows a snug and comfortable fit; Inside pocket. Quality: Industry 300D: 100% polyester, 300D Oxford weave with a stain resistant finish, 190g PU coating. Available sizes: S-4XL Available colors: fluo yellow / black and orange yellow / black. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
High shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
The Twill Rewear work trousers are comfortable, lightweight and circular work trousers. The work trousers are made of 65% recycled polyester and 35% organic cotton and are available in four cool colours. Available sizes: 42-66. Available colors: navy, black, dark gray and ink
Visor in green polycarbonate, gold coated. (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from - 50°C to +135°C. Dimensions: 500x250x1mm.
T-shirt in single jersey, 145 gr./m², 100% preshrunk ringspun cotton. Comfortable design with long sleeves. Available in : white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
Visor in clear polycarbonate. Heat resistant to temperatures from -50°C to 135°C. Dimensions: 450x220mm. Thickness: 1mm. In line: EN166.
Biodegradable single use glove, powder free.
These slim fit trousers with cut protection level D at the front: Slim-fit design; thigh pockets; Velcro closure; Double stitched seams; 6 storage pockets. Quality: Outer fabric: 98% Cotton, 2% Elastane 255g Contrast Cloth : 42.5% HPPE, 21.3% Glass, 21.3% PET, 14.9% Nylon Available sizes: S-3XL. Available colours: Black. In accordance with: EN 388 - 1.5.4.2.D.
High-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 35-48.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
Curtain to guide water into 9009 drum during a shower test.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Kernmantle rope with 11 mm diameter. For use in combination with rope grabs for 11 mm rope. With two loops at the ends and two fixed standard steel carabiner hooks.
Outer protective lens, extra scratch resistant, for welding helmet 9100. Not separately approved as PPE.
2 trauma dressings, 4 no. 1 bandages, 2 no. 2 bandages, 1 no. 3 bandage, 1 cold pack, 5 packs of white cotton wool 10g, 4 rolls of synthetic wadding 10 cm, 16sterile dressing pads 1/16, 10 sterile dressing pads 5 x 5 cm, 10sterile dressing pads 10 x 10 cm, 2 Metaline dressing pads 8 x 10 cm and2 that are 10 x 12 cm, 3 absorbent elastic bandages, 4 Cambric bandages, 3 triangular Calico bandages, 1 roll sticking plaster 2.5 cm, 1 assortment of wound plasters, 1 chlore hexidiine in alcohol, 1 pack wound plaster 6 cm, 1 pair Lister bandage scissors, 1 pair of splinter tweezers, 6 safety pins, 1 pair disposable gloves, 1 Kiss-of-life breathing mask, 1 Burnshield dressing 10 x 10 cm, list of important telephone numbers, list of contents. Content for first aid kit (Art: 1031052).
Belt bag for storing your Martor safety knife. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x60x28mm
Lens cleaner spray B412 with aqua formula, Alcohol and Silicone free. Suitable for all types of lenses. Anti-bacteria, anti-static and anti-reflective. 500ml.
Yellow safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 40-48, 49/50.
Screen carrier S55 Centurion for attachment to Contour face shields. This screen carrier includes Contour 30 mm adaptor for immediate attachment to Centurion helmet. Also suitable for addition of Centurion hearing protection (HELMET HEARING PROTECTION Scala SNR25 <(>&<)> HELMET HEARING PROTECTION Scala XI SNR30).
Face shield in clear polycarbonate, length 230 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 8 9.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Instant hand sanitizer, non-linting and durable wipes. Textured for superior cleaning. Sanitizes hands while wiping away light soils and dirt. Kills 99,99% of most common germs that may cause illness. Convenient and easy to use, ideal for offices, restaurants, health clubs or anywhere else germs may be. Always read the label and product information before use .
High safety shoe in microfiber/textile with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Insole for female; Available in different heights: Level 1 (wide), Level 2 (standard), Level 3 (small); Very good moisture absorption and release properties; wear-resistant; Suitable for all ESD-compatible safety shoes certified with this insole.
Work trousers from the HAVEP® Multiprotector+ Inherent FR collection. These pants meet 6 safety standards and are made of modacrylic with organic cotton. Conforms to: EN 1149, EN 13034-6, EN IEC 61482, EN ISO 11611, EN ISO 11612, ISO EN 20471 Available colours: fluo orange/grey Available sizes: 44-68
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of full-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 315 x 200 mm.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. Allows you to continue communicating normally. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.
Anatomically shaped, removable insole. This sole is anti-static and is specially designed for long standing postures. It combines an insole with a comfort layer that is in direct contact with the sole of the foot. No PPE.
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
High shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole Sizes: D, 36-48 / XD, 39-48.
Handy wall box in blue made of strong ABS for storage of safety glasses. Dimensions: L23,6 x W12 x H12 cm.
Face screen in blank polycarbonate, thickness: 1,5mmm, lenght 225mm. Possible combination with the Anti Electric Arc Browguard S89CAEA (1014252) or the face screen carrier S57CEHH (1000792). Packaging: 10 pieces.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 0: operating voltage 1000V, test voltage 5000V, special properties R (acids, oil, ozone) and C (low temperatures) .With 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-12.
Baseball bumpcap with reduced peak (25mm) and ABS protection. Sizes: 52-65cm.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (52-1-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection and indirect ventilation. With convenient surface for personalisation. Supplied with mesh visor (S59) and Baltic earmuffs. Colour: orange.
Low shoe in blakc leather. Fitted with a breathable liner in canvas. Outsole in rubber. Removable, polyurethane insole with textile layer. Sizes: 35 - 47. No PPE.
DuPont™ Tyvek® 500 Labcoat with zipper model PL309NP. Labcoat with collar, available in white and in sizes SM to 2X. Zipper closure. Without pockets. Elasticated cuffs (tunnelled). Stitched internal seams. Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances. Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added. Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others. Available sizes: S-2XL. Available colours: white.
Refill can containing 400 pairs of memory foam, conically shaped earplugs for the HL400 dispenser (1048893). The skin friendly earplugs protect against general noise.
Compact and extremely light safety knife for left-and right-handed persons. Glasfibre reinforced plastic hande and strong blade gives it a remarkable robustness. For cutting single layer cardboard, film and packing tape. The 2 cutting edges are safeley concealed to protect fingers. No replaceble blades available. To order by 10 pieces. No PPE.
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Multi-risk coverall with arc flash protection, 6 external pockets and 1 internal pocket, double-stitched reflective FR tape. Made from 79% FR cotton, 20% polyester, and 1% antistatic fibers.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Dispenser for Spark Plugs for 500 pairs of earplugs. Includes Spark Plug earplugs. Wall holder not included. (Art: 1001186).
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
Gloves with a supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Good grip in damp conditions. Antistatic Sizes: 8 / 9 / 10, length: 30 cm. Antistatic.
Excellent protection against hypothermia and solar radiation. This isothermal blanket reflects intense sunlight and retains body hea t, without sticking to open wounds. Effective shock prevention after a serious accident!
Helmet manufactured in vulcanised fiber, most favorite helmet for many welders due to it's weight and shape, small version of the Prota Shell, often used in smaller spaces, flip-up glass holder 108x51mm in size, weight: 365gr, easily adjustable headband, perfect comfort. Available: chinpiece in leather. Supplied with DIN 10 welding glass.
Coverall, 65 gsm microporous film laminate, with 55 gsm SMMS polypropylene back panel, covered over by the microporous film laminate. with Hood, elastic waist wrists and ankles, Taped seams. White with orange panel on the back.
Low shoe S2 in water repellent microfiber (partially Fashmo, partially Cordura) with 200J synthetic toe cap. Lining in breathable fabric. Outsole in TPU/PU with SRC and ESD certification. Removable black insole with ESD caracteristics. This shoe is 100% non-metallic and does not contain any leather. Sizes: 35-47.
Burnshield spray, 125 ml bottle, has cooling effect on burns.
Safety glasses Silium+ is a comfortable and ultra lightweight polycarbonate model for extended wear. Anti-sratch and anti-fog CSP- coating (Platinum): This innovating coating is an effective solution for all activities that alternate exposure to bright light and low light, while also being suitable for extreme hot and cold temperature environments. Resistance to surface damage by fine particles and UV- radiation.
Waipoua Forestry combination with ABS helmet, earmuff and vizor. A flexible and comfortable solution for face and heariong protection in forestry. Convenient for: forestry. In accordance with: EN 397/EN 352-3/EN 1731
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
