BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Earmuff X4 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Despite recent innovations, these earphones have an extra small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3 respiratory and eye protection. SNR: 33dB.
Labcoat in Micromax NS fabric. Collar with four front fastening studs and two hip pockets. EMN101 - 97.20cm length, 62gsm microporous polyethylene film / spunbond PP laminate, Three thread overlock stitch.
Beige/brown low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
High shoe in full grain leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a Gore-TEx liner. Laces are heat resistant. Has BIOMEX-PROTECTION-support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
The new generation of working gloves offering maximum grip with maximum impact protection. Abrasion resistant nitrile foam coating provides exceptional grip in dry environments as well when working when ther is water, grease and oil contact. Lightweight and breathable seamless liner (13 gauge) with Hook <(>&<)> Loop strap for secure fit all day long. Sizes: 7(S) - 12(3XL).
Cut resistant 5-finger glove with palm and back in water repellent cowsplit leather. Inner lining reinforce with knitted TEKINOX®. 15cm cotton protective cuff with extra wrist protection and seams in para-aramid. Total lenght: 35 cm. Sizes: 7-11. Suitable for : metal and glass industry, heavy industrial activities. In line with. EN388:2016: 4.X.4.4.F
High shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
Detachable arc hood with chin protection and peak. Quality: FR PU + inherent FR knitting; ± 280 g/m² Available sizes: XS-3XL. Available colours: Navy.
Care cream for hands and face. Time-tested qualities for heavily- stressed skin. Tube of 100ml.
The reusable Whisper+ detect earplugs from Uvex, fitted with a cord, provide unrivalled wearing comfort due to the soft ribs and pre formed design. Can be washed daily with normal soap under running water, which makes them economical. Available in package containin g 50 individually boxed pairs. Available in: blue.
Pre-formed, washable and reusable earplugs made of soft foam rubber for a perfect fit. Fitted with vinyl cord to prevent loss. 50 pa irs per package.
Boot in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex® liner. Outsole in PU/Vibram®, SR antislip, oil and carburant resistant. Removable, po lyurethane insole with textile layer. 100% metal free. Sizes: 37-48.
Driver extra gloves are very light, supple and durable. This glove is extremely comfortable and has a perfect fit. The top-quality sheep skin leather also provides very good tactility.
Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).
Helmet attachment system made of plastic, for use with all Fitt All Elect visors. Entirely metal-free, for use in electrical installations.
ABEK1P3 plastic filter housing with EasyLock connection for series 7000 and 9000 of Moldex. Protects against organic and inorganic gases and vapors with boiling point> >65 °C, sulfur dioxide, acid gases and vapors, ammonia and organic ammonia derivatives and toxic dust, mist and smoke particles. Filter Class 1: up to max concentration of 0.1%. +A1:2008.
Spare blades for safety cutter Klever X-change (1018439)
Matching detachable hood for parka Sentai. Colour: Navy
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50.
High, brown, welling safety boot in full grain leather with steel toecap, steel sole plate and scuffcap. Leather lining and leather insole. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/rubber: slip resistant, high wear resistance and optimal heat resistance to 300°C (HRO). Sizes: 37-48.
High shoe S3 in black / brown full grain leather with a 200J plastic toecap and plastic anti-perforation sole. Lining in synthetic breathable 3D material. Comfortable insole in coolmax. Sole in PU / TPU. Sizes: 37-47.
High shoe in black velours leather, with a steel antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 42.
Red steel sliding door cabinet with Plexi Glass. Dimensions: 1000x1500x500mm.
Refill pack Com4-fit for Uvex dispenser. Available in plastic bag containing 600 earplugs (300 pairs). light orange.
Rain set, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams. Jacket: Fixed hood with drawstring, zip under storm flap with popper fastening, adjustable press stud fastening sleeves, 2 straight pockets. Pants: Elastic at the waist, 2 side pockets, adjustable press-stud closure at the bottom of the leg, 3M reflection. Complies with: EN 343, EN ISO 20471 class 2.
Low shoe in black full grain leather with steel toecap and anti-perforation sole. Sole in PU/Nitril (VIBRAM), and insole in leather, with antibacterial treatment. This shoe is the extra wide XXD version of the Alaska. Sizes: 39-47. All materials are re-usable and shoe is fully dismantable.
Designed to keep the wearer visible, safe and dry in inclement weather. This lightweight stylish two-tone jacket has the following features: buildable hood, large pockets, vent on the yoke at the back and eyelets for extra ventilation. Available sizes: S-3XL. Available colors: hi-vis yellow / navy, hi-vis orange / navy. Conforms to: EN ISO 20471 Class 2, EN 343 3.3.
Low shoe S3 in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35- 52.
The thermal acrylic lining provides excellent thermal insulation so work is more comfortable. Excellent thermal insulation. Soft, non-fluffy. Very absorbent to maintain dry hands. Ideal as a liner under unlined over-gloves. Sizes: 7 and 9.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is not required. The chinstrap incorporates a quick release buckle. Removable harness also fits all other Centurion helmets. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Chemical glove for precision and medium-heavy work. Immersed in a two-layer liquid-tight Nitrile using our XLNT technology. 35 cm long safety cuff. 18gg liner for high fingertip sensitivity in difficult environments. Type A chemical protection. Food approved and Oeko-tex certified. EN388:2016 4X43C EN407: X1XXXX EN374-1:2016: AJKLMNOT
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Gloves with blue nitrile layer on a jersey lining. Palm coating and safety cuff. Excellent abrasion and cut resistance, very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-10.
White gloves made of light cotton. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate, provides wide field of vision (80 %). Speec h is conveyed via the speech membrane, which provides clear speech transmission. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry str ap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coup ling.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
AB2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C. Can be used in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0. 5 %.
Hood, knitted Nomex®, flame retardant, with long collar, oval face opening. Available in: white. Sizes: 1 size.
Coverall, 2-piece hood, external yellow stitched in seams, elasticated waist, cuffs, ankles and hood, nylon zipper. Category III, Type 5/6
Parka in polyester with PU coating FR. Water-and windproof, breathable, reduced chemically resistant, flame retardant and anti-static. Can be combined with a vest or a FR fleece. (Art 1024367). Hood also available. Characteristics: Straight collar, zipper covered under flap, two chest pockets, inside pocket, two patch pockets and 2 loops badges. Available in navy.
Lined winter glove with fleece lining and PU palm. Safety cuff. Fully lined. Sizes 8-11.
Maximum working tension: 17000V AC - 25500V DC. CEI 61111: 2009. Material: elastomere. Colour: grey. Packaging: 1m2. 3 mm thikness. Upper side ribbled, flat underside.
Glove with full nitrile coating on low-lint seamless knit polyester/nylon liner. Glove with high sensitivity and good grip thanks to the rough finish.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. Oekotex certified.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Washable, reusable and detectable pre-formed earplugs made of softsynthetic material, with 3-rib design. These earplugs have a comfortablefit and offer excellent protection against universal noise. These earplugs are detectable by means of a tiny steel ball embedded in the front of the earplug. Ear protection with a sophisticated design that is primarily useful in the food industry. Packaged per 50 pairs. Suitable for: agricultural and food industry.
Sporty goggles, derived from the successful Uvex ski goggles. Successor to the Ultravision 9301 PC. Very comfortable, good protective coverage thanks to the DCT technology. Glasses with limited ventilation. Frame colour: green/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes Supravision Extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside. 170 2-1.2.
The Secure Fit safety spectacle is comprised of a rimless lens and fixed-length temple arm. An integrated side-shield is included for added protection. Temples also feature 3M Pressure Diffusion Temple Technology which helps diffuse pressure over the ear to enhance frame comfort across a diverse workforce. This innovative design promotes improved comfort and security of fit.
Leather boot, with 2 loops to help pull boot on. GORE-TEX lining. The Softane 2-component sole allows for better slip resistance and is resistant to oil and hydrocarbon contact. This shoe offers great shock absorption. With a protective toecap in synthetic polymer, which makes the shoe lighter and a stainless steel anti-perforation insole. Sizes: 37-48.
Boot in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex liner and wool. Outsole in PU/Vibram, SR antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 37-48.
This high‑cut lace‑up safety shoe is robust, modern and lightweight, with an extra‑wide fit. The breathable textile lining and the s hock‑absorbing, energy‑returning uvex i‑PUREnrj planet midsole provide excellent comfort. The water‑resistant uvex waterstop leather offers added protection, while the metal‑free safety toe cap and steel midsole ensure optimal safety. The shoe is ESD‑certified, equipped with reflective elements, and meets the SR slip‑resistance standard.
High shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole Sizes: D, 36-48 / XD, 39-48.
Seamless knitted cotton, No PPE 400gr/12pair
Glove in roughened interlock with nitrile coating (35 cm long). Smooth Solknit offers excellent abrasion resistance and a perfect grip on wet and oiled materials. It also protects against a wide range of chemicals, detergents and solvents. Extremely suitable for the chemical industry, the paint and petroleum sector, the transportation and treatment of hazardous substances. Food approved, antistatic and silicone free.
Signa T-shirt Bird Eye Knit, 100% polyester, rond collar, weight 150 g/m².
Screen carrier S54B Centurion for attachment of Centurion face shields to safety helmets. This screen carrier can be attached direct ly to the 30 mm slot on the helmet using adapter BILSOM 3712 (not included). With the addition of a BILSOM hearing protector, a comb ination head-hearing-face protector can be created.
Hood, knitted Nomex®, flame retardant, with long collar, covered face with two eye openings. Available in: beige. Sizes: 1 size.
Double lanyard, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Double Lanyard to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Knee pads for Dapro work trousers. Dimensions: Length of 24 cm and a width of 16.8 cm.
Eco Midi cleaning paper according to the european ecolabel. 100% pure. Dimensions: length: 300m, width: 20cm. 1-layer. Package: 6 roles in one box.
Industrial headlamp Vizion I,with non-slip rubber helmet strap.Safety Yellow, ATEX. 3 beam modes: spot,diffuse and red diffuse.The red diffuse mode makes night vision possible. The Vizion is O-ring sealed for a completely watertight guarantee. Designed for gloves. Effortlessly access the power button and beam selectors with even the thickest gloves. Lamp module can be removed from its casing for use as a portable work light.
Sandale in velours leather, with a synthetic antiperforation sole and synthétic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metalfree. Sizes: 35-50.
