BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
High shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Exterior: Concealed button closure / Zip fly, 2 set-in pockets with flap, 2 back pockets with flap and hidden snap button closure, 1 patch thigh pocket with flap and hidden snap button closure, 1 ruler pocket with flap and hidden snap button closure, elasticated waist, knee pockets, waistband with belt loops, flame-retardant reflective tape (50 mm). Inside; identification tag. Material: Sio-Safe Essential Eco 50% cotton + 30% Tencel + 19% recycled polyester + 1% AST; +- 320 g/m. Complies with: EN 61482-2 9.7 cal/cm² ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 116111 class 1 A1 A2, EN 1149-5, EN 13034 (typ PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 48-58 S, 44-64 R, 46-56 L
High shoe in microfiber with a synthetic antiperforation sole and composite 200J toecap. With scuffcap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/Vibram Ecostep (recycled material), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48 (D/XD).
Polar Fleece 300 gsm, 100 % polyester,300 gsm, short-cropped and combed anti-pilling fleece, set-in sleeves, tone-on-tone full zip, pockets with zip, adjustable hem with elasticated cord pull and stoppers, easy to decorate.
"Winter bomber jacket with detachable sleeves, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multi-functional jacket with detachable sleeves and fleece lining, taped seams on the inside, extended back, Straight collar, foldaway hood in collar Zip closure under flap with touch & close fastening, 1 Patched chest pocket with zip closure, 2 Inset pockets, 1 Phone pocket, sleeve pocket + penpocket(s), 1 Mica pocket, detachable sleeves, elastic at end of sleeves with narrowing by touch & close fastening, elasticated at the sides of the waist, back length 75 cm (L), fixed lining:polyamide in body + quilted sleeves, 1 Inside pocket, zipper in back lining for placing logos, detachable fleece lining in body, 1 Patched pocket. In line with: EN343 3.3., EN 14058"
High, brown, welling safety boot in full grain leather with steel toecap, steel sole plate and scuffcap. Leather lining and leather insole. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/rubber: slip resistant, high wear resistance and optimal heat resistance to 300°C (HRO). Sizes: 37-48.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
Low shoe for women in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Functional layer 3 wind- and water repellent softshell jacket. Quilted padded lining. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
This body warmer has a traditional fit. The extended back ensures that the back stays covered during bending. The vest offers plenty of storage space with 6 pockets on the front and 2 inside pockets, 1 of which is suitable for the phone. The vest is opened with a printer zip. The armholes are provided with elastic wind catchers. Quality: 65% polyester / 35% cotton, plain weave, 160 g / m². Available colors: navy, black and white. Available sizes: XS-5XL.
Premium men's jeans with 2% elastane that provides extra comfort. These jeans are a jog denim. Quality: 99% Combed cotton / 1% Elastane, 360 g / m². Available sizes: 29 - 40. Available colors: Jeans blue.
Flame retardant and antistatic fleece Diablo: - 2 front pockets; - 1 breast pocket; - zip-in in parka art 1046719. Quality: MODACRYL / CO / PES / NEGASTAT 48% / 32% / 18% / 2%. Available sizes: XS-3XL. Available colors: Gray / black. Compliant with: EN ISO 11612 and 1149-5.
Classic and comfortable polo shirt PPK180. Quality: 100% cotton, 180 g / m². Available colors: navy, white, red, royal blue, gray melange, gray anthracite and green. Available sizes: XS-7XL.
Hi-vis winter parka for women: Waterproof and taped seams prevent water ingress; Lightweight flexible interrupted HiVisTex Pro reflective striping; Ezee Zip; Lined for extra thermal insulation; aluminized liner; Detachable ID holder; Quick drying knitted cuff. Quality: 300D Industry: 100% Polyester, 300D Oxford Weave, PU Coated with a Dirt Resistant Finish 190g. Available colours: Fluo yellow/black and fluorescent orange/black. Available sizes: XS-2XL. Complies with: EN ISO 20471 class 2, EN 343:2019 Class 3:1 and EN 342.
The Jibou is a multifunctional bomber jacket that protects you against many hazards. The bomber jacket is on the inside completely lined with a fixed flame retardant cotton lining. The outer fabric is a strong and high-breathing water repellent and coated fabric which makes the jacket wind and waterproof. For extra protection against the cold and the rain it is possible to narrow the sleeves, to zip in a fleece lining and attach a hood (both to be bought separately). Conforms to: EN ISO 14116, EN 1149-5, EN 13034, EN ISO 20471 and EN 343. Available sizes: S-3XL Available colours: Yellow-Navy, Orange-Navy
White female clog SB in perforated microfiber, with a 220J steel toecap Adjustable buckle. Liner in Cambrelle and sole in PU/PU. Sizes: 35-42.
Coverall, polypropylene, 50 gr./m², hood with elastic, zip closure under flap, elastic at wrists and ankles. Available in: white, blue. Sizes: L- XXL.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Fire resistant air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Replacement knifes for safety knife Profi 40. Dimesions: length: 71,20mm, width: 18mm, material thickness: 0,50mm. Package: per 10 pieces. No PPE.
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
The Stability Pro Plus insole gives extra pronation, extra support on the inside of the foot and has a central footrest (for dropped front foot). This insole gives optimal support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to lateral support to the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is thermodynamic, eliminating excess heat and preventing blistering.
Twin pack dust filter protects against highly toxic dust, mist and smoke particles. Can be used in combination with the Adflo motor unit. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
Workwear trousers with great flexibility. Stretch fabric across seat area, crotch area and knees to provide extra flexibility. Two leg pockets with zip. Two back pockets with flap. Attachment for holster pockets. Quality: 65% polyester, 35% cotton 245 g/m2. Available Colours: sky blue, red, navy, black, green and grey. Available Sizes: C44-C62, D84-D120, C146-C156.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray. Available sizes: XS-2XL. in line with: EN 1149, EN 13034, IEC 61482, EN ISO 11611 (front class 2) and EN ISO 11612.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Refill pack containing 500 pairs of EAR Classic for One Touch dispenser (1031971). EN 352-2 (SNR 28).
Jacket, 100% polyester, 150 gr./m², water-repellent finish, 100% thermal polyester filling 300 gr./m², insulating, lined hood, padded collar, two patch pockets with flap, patch breast pocket with flap and ID pocket, zip with storm flap and velcro, tricot cuffs, 1 horizontal reflective stripe on chest and back, water vapor permeability and even at temperatures between 5 ° C and -40 ° C. Available in: navy. Suitable for cold stores and cold stores. Sizes: S - 3XL.
Blue safety glasses, polyamide frame and polycarbonate lenses. Universal size. Suitable for protection against impact.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
Low-cut workshoe in microfiber without toecap. Lining in textile. Walking sole in PU/TPU. Sizes: 36-49.
Low shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
High shoe made of water-resistant full-grain leather with a scuffcap, which guarantees extra protection against wear. This shoe also contains a Goretex lining: the 2-component membrane regulates the temperature in the shoe and protects the feet against cold and water: the water cannot penetrate the shoe, but the moisture (sweat) can still be diverted to the outside. Aluminium protective toecap and synthetic antiperforation sole. Memory protective insole made of polyurethane and Elastopan thermosensitive memory foam from BASF, reduces pressure points, improves weight distribution and absorbs heel shock. Anatomical and perforated. Sole in PU/E-TPU/PU. Sizes: 38-47.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colou r: black.
Comfortable and lightweight plastic safety glasses with patented adjustable nose bridge, of which the nose bridge can be put in 3 po sitions in order to achieve the best possible fit.
Coverall, Tyvek, breathable, resistant to water-based chemicals, back side made of breathable material, antistatic, does not pill, elastichood, elastic at ankles and wrists, Tyvek zip closure with flap.Available in: white.
Cobra hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and has an anti-slip temple and branches. Ventilated. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating. Protective bag included.
Ergonomic Uvex anti-static insole, ultra-breathable and moisture-absorbent. Provides optimal support to the arches of the feet. Shock-absorbing and contains a comfortable structure, which reduces foot fatigue. No PPE.
High shoe S3 in waterresistant black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35-52.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Helmet hearing protector Sana 30 for safety helmet CENTURION.
High shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-49.
Exceptional chemical protection gloves with tight fit for medium-duty and precision work. A two-layer liquid-proof nitrile coating with Guide XLNT™ technology ensures superior grip in both oily and dry envi ronments. Superb moisture management and an outstanding barrier against liquids and chemicals. The 18-gauge nylon liner provides high fingertip sensitivity in tough environments.
High safety shoe in black full grain leather. Ankle protection in red leather. Wide perforated 200 J-steel toe cap (width 9). Antiperforation midsole. Flat Vibram outsole, excellent anti-skid tread. Reflective band on heelpiece. Special Isoltane insole for high temperatures. Sizes : 38-47. Conforms to EN 20345 S3 HI HRO SRC
Goat leather gloves of standard quality, with elastic on the inside and seam reinforcement in the fingers. These gloves provide extremely fine tactility. Available in two versions: Driver EC (standard quality) and Driver (super quality).
Safety boot in PVC with nitrile non-slip sole. The boot has a steel toe cap in compliance with standard EN 20345. The boot is resistant to hydrocarbons, animal fats and vegetable oils. The Guardian is very flexible and can be used in cold conditions. Sizes: 37-47.
Flame retardant, anti-static long john, Very soft handle, Comfortable, Good moisture regulating properties, Lightweight, Inherent flame retardant & anti-static, Outside: Front fly, Ribbed ankles for extra comfort, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. With breat hable, abrasion resistant lining in BIOACTIVE textile. Sole in PU/Vibram, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Scuffcap resistant against abrasion. Sizes: 37-47.
Safety helmet made of ABS, fitted with a 4-point textile suspension with wheel adjustment (54-62cm) and synthetic sweatband. Non-vented. Includes European 30mm accessory slot for face protection. Foreseen of a UV- indicator. Sizes: 54-62cm.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Innovative compact folding mask with 7 dynamic parts providing excellent facial movement with maximum comfort. Valved and with inner foam to increase the comfort of the wearer. DOLOMITE optional clogging test. An individual polybag and special flat shape make it easy to store and vending machine ready. Disposable mask FFP3 level, protects against solid and liquid particles of high toxicity. NPF:50.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Yellow liquid-tight natural rubber glove, treated to resist bacteria. Length: 30 cm, thickness: 0.35 mm. Recommended for retail, waste management, cleaning services, commercial kitchens, ... Also ideal as a household glove. Old name: Econohands Plus. Sizes: 7-11.
Low-cut safety shoe, type city model, lightweight and elegant, in high-sheen leather, fitted with a steel toecap and synthetic antip erforation midsole. Liner in leather tanned with natural oils. The shoe meets the ESD requirements and can therefore also be used in work areas where static charge build-up may not exceed 35 ohms. Outsole in rubber: slip resistant, high wear resistance and optimal heat resistance to 220°C. Sizes: 39-48.
Heat and cold insulating insert sole made of 100% wool. Fits in any shoe and is mainly worn in the winter. Material: 100% wool. Suit able for: general industrial applications.
ABEK2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >6 5 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Only for use with full face masks with sta ndard threads. Class 2 gas filter: for max. concentration of 0.5 %.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 45 cm.
Flame retardant and anti-static hi-vis waistcoat, Stitched seams, Outside: V-neck, Closure with touch and close fastening, Fabric: 100% polyester fabric with 100% FR PU coating +AST; ± 250 g/m².
Parka ripstop, 100% polyester ripstop with PVC coating, waterproof, taped seams, reflective piping, inside partly quilted polyamide partly fleece, zip with flap and Velcro, hood in the collar, lined, adjustable drawstring, elastic cuffs, elastic waist.
Bodywarmer ripstop, 100% polyester with PVC coating, waterproof, inside: 100% polyester wadding 180 g / m², retro reflective accent, zip with press studs, straight collar, microfleece lined 280 g / m².
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
High shoe in smooth leather, with a steel antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex membrane. Sole in P U/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Conically shaped earplug in polyurethane foam. Packed in 1 box with 200 pair. SNR: 35dB. with: EN352-2.
Seamless knitted cotton, No PPE 400gr/12pair
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: yellow/black.
