BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has a rubberized cuff of 6cm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Knee protector made of 100% Polyethylene. Dimensions: 245 x 145 x 18 mm. In accordance with: EN 14404
Lightweight and very comfortable faceshield,450 x 250 mm. With individually adjustable headband and foreheadprotection. Polycarbonate visor: good impact resistance, heat resistant up to 130 degrees C.
Hi-vis rain jacket with detachable softshell, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multifunctional 4 in 1 product, can be used in all weather conditions, 100% waterproof, windproof, highly breathable, water repellent outer fabric, moisture attracting coating on the inside, comfortable, supple, high tear resistance, taped seams, straight collar, foldaway hood in collar, zip closure under flap with touch & close fastening, 2 inset pockets, 1 Napoleon pocket, kimono sleeves, elasticated wristband with narrowing by touch and close fastening, drawstring in waist, back length 85 cm (L), fixed mesh lining, knitted wind cuffs in sleeves, 1 inside pocket with zipper in back lining for placing logos.
Low shoe in water repellent suede split leather, with a synthetic antiperforation midsole zero penetration and synthetic 200J toecap. 3D- lining in textile, soft and very breathable for better comfort. Sole in PU/PU. Inlaysole in PU foam. Sizes: 38-48.
Flame retardant signaling waistcoat with 2 horizontal and 2 vertical reflection bands. Suitable for work where high visibility is important. Available sizes: S / M - 4XL / 5XL. Available colors: Fluo yellow and fluo orange. In accordance with: EN ISO 20471 Class 2 and EN 14116 Index 1.
High shoe in hydrofugated textile, with a synthetic antiperforation sole and steel 200J toecap. With TPU scuffcap. Fitted with a Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
High shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Black flocked 30 cm gloves in unlined neoprene. Thickness 0.75 mm. Very good finger sensitivity. Protection against a wide range of chemicals. Ideal for use in a cold environment.
Insulating sock with foam inner layer for extra wearing comfort in boots. Breathable and absorbs perspiration. Sizes: 36-49.
Gloves made of cowsplit leather with a 7 cm protective cuff. Available in: green/white. Sizes: 8 / 9 / 10.
Hi-vis rain trousers, 100% waterproof / Windproof / Highly breathable / Water repellent outer fabric / Moisture attracting coating on the inside / Very comfortable / Supple / Very light / Taped seams Outside: Legs adjustable by press studs / Elastic waist Inside: Fixed lining: polyamide Fabric: SIOPOR® Regular: 100% polyester fabric (plain weave) with 100% PU coating; ± 155 g/m² Colour: FC1 hi-vis orange - FR1 hi-vis red - FY1 hi-vis yellow
Low shoe in grey water resistant full grain leather, with a non-metal anti-perforation sole and a steel 200J toecap. With breathable, abrasion resistant lining in BIOACTIVE textile. Sole in PU / TPU, SRCanti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 37-47.
Cut-resistant glove with HXFIBR fiber (18 gauge) with PU coating. Very finger sensitive. reinforcement between thumb and forefinger. Thight fit and flexible cuff, without glas fibre. ESD, touchscreen function. Free of DMF, silicone and natural latex. Oeko-Tex standard 100. Sizes: 6-12. In line ith: EN388:2016 4.X.4.2.C, EN407: X.1.X.X.X.X.
Safety glasses with clear polycarbonate lens fitted with an anti-fog and scratch resistant coating. Soft material around the earbranch. Adjustable temples in height. A good choice for use by visitors. Suit able for: general industrial applications.
Sturdy puncture resistant glove with 8 layers of metal fabric in the palm and 4 layers on the underside of the fingers and over the fingertips. The top of the fingers and knuckles are also reinforced.
Safety knife with automatic blade retraction. Suitable for left- and right- handed people. Aluminium handle with renewed and simple blade change. Cutting depth: 36mm. Replacement blade: 7940 (1016566). No PPE.
Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Gore-Tex lining. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Very comfortable high cut resistant (cut class E) glove with a gray PU coating. Highest dexterity (18 gauge). Ideal for dry applications in disassembly, handling of objects with sharp edges. Touch screen functionality. According to EN388: 4.X.4.2.E
High shoe in brown water proof full grain leather AP 23, which was treated by Jallatte in an exclusive manner. This high quality leather offers an extra protection against humid weather conditions and spots. The shaft has a leather lining in order to protect the ankles and the Achilles tendon. The dual density sole out of Softane has a good slip resistance and protects against oil and hydrocarbons. This shoe has a good shock absorption. Perforated nose in Aérane-Tech polymer, which makes the shoe lighter. Thanks to these perforations the sweat can easily leave the shoe. The midsole is seamed directly onto the shaft which makes that the foot is 100% closed in. The anti-perforation midsole Flextane HP by Jallatte is 100% Composite. Sizes: 35 – 48.
T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, short sleeves, round collar. Available in: white, black, navy, red, natural, sand, beer brown, yellow, gold, apricots, orange, fuchsia, purple, burgundy, deep red, sky blue, azure, turquoise, atoll, royal blue, blue jeans, light blue navy , kelly green, bottle green, khaki, gray ash, sport gray, dark gray, real turquoise, used yellow, used raspberry, used violet, used wasabi, mint green, pistachio.
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Flame retardant and antistatic hi-viz softshell in 100% polyester with FR PU coating and inherent FR fleece, 3-layer (400g/m²). Straight collar, zip closure with flap and velcro, chest pocket with zipper, 2 inset pockets, 1 gasdetector loop, adjustable cuffs by velcro, stitched seams, FR reflective striping, back length L: 77 cm. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
High shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Light safety helmet made of ABS and fitted with 6-point textile suspension (52-64cm) and Hydroflock sweatband. Includes European 30mm accessory slot for face protection. Has a raingutter and integrated spectacle. Electrically insulating in accordance with EN50365 for live- working in low voltage environments. Colors: White, Yellow, Green, Orange, Red, Black, Grey and Blue.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 44-66. Available colors: Navy / gray, black / gray, corn blue / gray, red / gray and charcoal gray. Compliant with: EN 14404.
Multi-risk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at waist. Quality: 79% / 20% / 1% Cat / Poly / AS. Available sizes: 44-66, 24-29, 47-57 HAV. Available colors: Blue / gray. Conform: EN 1149-5, EN 11611 class 1 A1 (front class 2), EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Very thin and light glove, 15 gauge. The INTERCEPT™ yarn provides high cut protection while providing dexterity and comfort. The nitrile palm coating design improves grip, extends glove life in abrasive conditions and allows the hand to breathe. The glove is silicone free which prevents the transfer of silicone contaminants to metal parts prior to painting. The Oeko-Tex certification guarantees that the glove does not contain any harmful substances such as DMF and other chemicals.Fiber glass free, latex free, antisttic, food approved and machine washable at40°C. Sizes: 5-12.
Helmet hearing protector Sana 25for safety helmet CENTURION.
High shoe, metal-free safety shoe S3 in black full grain leather with 200J synthetic Duo Component toecap, protective scuffcap. BOA closing system. Fitted with a breathable textile lining. Padded tongue and removable, antistatic insole, moisture absorbent. Sole made of PUR (PU/PU): suple and lightweight, oil and petrol resistant, slipresistant. ESD: electrostatic discharge. Sizes: 38-52 (10, 11, 12).
Thin unlined welding glove made of soft and durable goatskin with Kevlar seams, REACH compatible.
With these new work trousers you can literally do anything! Fully 4-way stretch and extremely lightweight. The 4-way stretch work trousers have a contoured fit, which makes them extra comfortable. The hard-wearing Cordura® fabric reinforces the trousers on the thigh pockets and at the ends of the trouser legs. MATERIAL 4-Way Stretch 260 g/m² 90% polyamide / 10% elastane Available sizes: 42 - 66 Available colours: black
Refill for first aid panel: Refill pack of 6444 textile plasters. 1 Refill pack contains 6 X 40 plasters.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 1: operating voltage 7,500V, test voltage 10,000V, special properties R (acids, oil, ozone) and C (low temperatures). Length 41 cm. Supplied with 1 pair of over-gloves.
Super lightweight sportive spectacles (37g) in clear polycarbonate. Protective covering thanks to flat base curve. Lens inclination of 11° ensures good view downwards and provides the wearer safeness from stumble-accidents. Flexible frame with soft temples(XCT). With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean.
Hood, Guardian H²O, flame retardant and antistatic, water- and windproof, breathable. Available in S-3XL
High shoe in waterresistant black nubuck leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Belt with metal buckle in high quality leather. Available sizes: 65-95cm / 80-110cm / 100-130cm. Width: 4 CM. Available colours: black, brown.
Working trousers in 65% polyester/35% cotton (245g/m²). Hidden closure, elasticated waist, 2 side pockets, inner kneepockets, rear pocket, 2 leg pockets with ruler pocket, double seam for +- 6 cm extra length. Industrial washable up to 85°C. Available sizes: 42-64. Available colours: navy, black, grey convoy, dark grey.
Hi-vis waistcoat in 100% polyester (120g / m²). Horizontal and vertical reflective tapes, velcro closure. Available sizes: M-3XL. Available colors: royal blue, red, rose, lime, white.
Single gas detector with limited lifetime of 2 years, no maintenance or calibration required. Device is equipped with a self-test, to be performed before use. Display only shows remaining months of operation, no concentrations. Device with O2 sensor with alarms at 19.5% and 23.5% Vol. (min. 18% and 25% Vol.) Measuring range: 0-25% Vol. Compliant: Ex ia IIC T4. IP class 67 and Atex approved.
The X-fit detect, including cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also re duces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate ba g. Colours: blue.
Trousers, 100% polyester, PU coated, 190gr. /m², elasticated waist, reflective tape. Available in: navy blue, black.
Sporty lightweight (34 gr) goggles with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With textile headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Safety knife with concealed blade, especially designed for cutting film and plastic strpping band. The concealed blade and rounded nose reliably protects you and your products. It has perfect ergonomics and the blade change is made very easy.No PPE.
These practical trousers with two inset pockets, one back pocket and one ruler pocket feel comfortable thanks to the breathable non-allergenic fabric and with a weight of 260 g/m² they are very light and comfortable to wear. For your convenience, there are also knee pockets in which knee protection can be inserted, and the elastic waist has belt loops. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available sizes: 44-64. Available colors: Navy.
Hi-vis vest for ambulance workers with 2 patched front pockets, 1 right breast pocket, ID badge holder, radio loop and radio pocket. With zipper. Quality outer fabric: 100% polyester + PU coating, 200gr / m². Inner fabric: 100% PES fixed mesh comfort lining. Available color: fluo yellow / enamel blue. Yellow reflective prism bands. Available sizes: XS-4XL. Conforms to: EN ISO 20471 Class 2.
Full stretch pants for more comfort and freedom of movement: • stretch in 4 directions over the thighs and buttocks • stretch at the back of the knee and calves • mesh ventilation openings with zippers • ventilation at the waist through perforated waistband • leg pockets, telephone pocket with magnetic closure • loop for badge holder • ruler pocket and pocket with knife button • 2 hammer loops • 2 pockets reinforced with Cordura® • reflective details • knee pockets with Kevlar stretch • loop for badge holder. Quality: 65% polyester, 35% cotton, 235 g / m². Available colors: Navy, Gray and Black. Available sizes: C44-C62, C146-156, D84-D120.
Low shoe in black water repellent Techsell, with a breathable Sany-Dry lining. Fitted with a synthetic perforation sole and aluminium 200J toecap. Outsole in PU/TPU. Sizes: 36-48.
Gloves with blue nitrile layer on a jersey lining, palm coating and tricot cuff. Excellent abrasion and cut resistance and very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working industries. Application: heavy working conditions. Sizes: 8-11.
Sundor sole inserts have an underlayer of carbon felt, they not only absorb moisture but odours as well. Sundor also provides good i nsulation from heat and cold. Fitted with slip resistant rubber nodules on the upper layer. Sizes: 36-47.
Blue belt in textiles with metal slide buckle. 100 to 150 cm, width 3 cm. No PPE.
Hi-vis rain jacket / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Very comfortable / Supple / Very light / Taped seams / Outside: Fixed hood in collar / Zip closure under flap with press studs / 2 patched pockets / Round inset sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Inside: Fixed lining: mesh in body and polyamide in sleeves / Fabric: SIOPOR® Regular: / 100% polyester / Fabric (plain weave) with / 100% PU coating; ± 155 g / m² Colour: FC1 hi-vis orange - FY1 hi-vis yellow - FR1 hi-vis red
J-Energy series. Low shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Ergonomic safety knife Secunorm 500 in Aluminium, with automatic blade retraction suitable for right-handed and left-handed use and equipped with a 50mm long trapezium blade. Cutting depth: 17mm. Can be used to open bags and for light cutting operations such as cutting paper webs. The blade is very flexible so the risk of depleting is very low. The blade is connected to a spring and pulls back automatically into the container. No PPE. Blades: 1023415.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Conical earplug made of polyurethane foam. The pressure is evenly distributed in the ear, resulting in optimal comfort. Easily detec table by standard metal detectors because they contain a tiny steel ball and are attached to a detectable cord. High visibility due to blue colour to avoid potential contamination in the food sector. Non-poisonous and hypo-allergenic. Packaged per 200 pairs. Suita ble for: agricultural and food industry.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Coverall flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 chestpockets with flap, 2 patched side pockets, 1 meterpocket with flap, 1 back pocket with flap, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy, orange, red, charcoal and black.
Supple glove in unthoughened vulcanised rubber. Test voltage 5.000 volt, use voltage 1.000 volt. This glove is suitable in any environment where protection for electrocution is necessary because of its isolating quality and high dexterity. In line with EN 60903 class 0 cat AZC.
Extra thin (18gg) cut resistant glove that keeps the user cool all day long. High dexterity, nitrile coating on the palm and fingers. Approved for use in contact heat up to 100°C (15sec) with reinforced thumb grip and touch screen compatible. Sizes: 6-12. Complies with: EN388:2016 4.X.4.3.C, EN407 X.1.X.X.X.X
Thin (15GG) and comfortable work glove made from merino wool to keep your hands warm, suitable as an inner glove in cold environments. Touchscreen and food approved. Sizes: 6-11.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Cut resistant glove for medium weight applications requiring high level of performance in dry or slightly oily environments. 13 Gauge seamless knit liner of HPPE, Fiber glass, nylon, nylon, plyester, spandex with foamnitrile coating. The coating has an excellent abrasion resistance, and good level grip in dry and slightly oily environments. Sizes: 6-11.
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (51-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Can be fitted with flip-up safety glasses (to order separately: 1000242).
This Proflex back support belt in breathable Spandex (100% woven nylon) provides maximum support of the lower back and abdominal mus cles during lifting, hoisting and other strenuous tasks. Extremely supple version with patented V-shape and Sticky Finger support st rips on the inside to keep the belt perfectly in place while it is worn. Includes adjustable two-phase closure and removable, machin e washable shoulder straps. Sizes: S / M / L / XL / XXL.
Welding vest from flame retardant cotton (330g / m²) with 2 chest pockets, mobile phone pocket under flap, double stitched for extra strength.
Anti-static absorbent pads measuring 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 piece s. The wipes are made from 3-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 112 litres.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. Sizes: S, M and L. NPF: dep endent on the filter used.
