BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Cut resistant, completely seamless grey knit gloves with black nitrile coating. Excellent tactility combined with highest level of cut protection, even on oiled objects. Sizes: 8 / 9 / 10 / 11.
Insole to support the flat longitudinal arch and gives comfortable cushioning.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam in the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable lin er in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 37-47.
Shift work trousers with concealed zip, thigh pocket with concealed press stud fastening, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, Cordura® knee pockets, 1 back pocket with concealed press stud fastening, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g / m2. Available sizes: 44-66. Available colors: Navy / gray, black / gray, corn blue / gray, red / gray and charcoal gray. Compliant with: EN 14404.
Helmet hearing protector Sana 25for safety helmet CENTURION.
Ultra-thin (21gg) and airy glove that feels like 2nd skin, for precision work.
Overshoes, Micromax, elastic, PVC non-slip sole. Suitable for : agricultural and food industry. Colours: white. Sizes: XL= 31cm.
High shoe Till ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
Low shoe in water repellent velour leather, with a synthetic anti- perforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole Crazy+ in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Low shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 37-48.
Eye-volution – from a technical standpoint probably the most complete Uvex glasses. Temples, front and nose bridge made of DCT: hard on the outside, comfortably soft on the inside. Temples easily adjustable in length and inclination. Replaceable lens. Fitted with clear polycarbonate lenses that provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,23kg CO².
High-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency.
Flame retardant anti-static long sleeve sweatshirt, modaflame knit, 300 gr/m².
Super lightweight, perfectly balanced safety helmet in strong ABS, ventilated. With 6-point textile interior (52-64cm) and highly absorbent hydro-flock sweatband. Very large surface area for personalisation. With a rain channel and unique drainage system. With European 30mm slot for attachment of hearing and face protection. With retractable glasses, impact B (!), suitable for wearing with prescription glasses. These glasses have a soft adjustable nose-bridge and can easily be replaced. Manufacturing date is noted near the glasses in the black plastic. Accessories: badge holder, bulb holder, reflective strips, replacement glasses. Colours: white, yellow, blue, red, green, orange, black.
Seamless lined glove with nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Bermuda, 65% polyester, 35% cotton, 300g/m², multi pocket, zip closure. Available sizes: 42-64. Available colours: Navy, White, Black, khaki, dark grey. No PPE.
Thin, flexible work glove – part of our ENVI sustainable products series. ENVI gloves are manufactured using less energy and/or less water consumption. They are also DMF, butadiene and silicon-free. 3304 has a 15 gg liner made of glycose/glycerol starch and small amount of nylon for a more sustainable choice and exceptional moisture management. Approved for contact heat level 1 and Oeko-Tex certified. Premium nitrile palm dipped. Touchscreen.
High shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Mask in very comfortable and high quality EPDM rubber. Anti-vapour visor in polycarbonate with very wide field of view. Voice transfer occurs via the speech membrane that provides clear voice transmission. Double exhalation valve to keep exhalation resistance very low. The headband is easily adjustable, includes a carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling.
Dust filter holder for attachment of dust filters 5911, 5925 and 5935 to 3M gas filters. Also for use in combination with filter hol der 603 for direct connection of dust filters 5911, 5925 and 5935 to 3M half and full face masks.
High ranger shoe Renzo with metal toecap and anti-perforation sole. Sole in rubber/PU, with injected PU raised toecap. Fully padded water-tongue. Anatomically shaped insole, ESD, and lining in water absorbent textile. Sizes: 36-50.
Low shoe in white microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in Smartec Air Sanitized. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: D (35-49), XD (37-49).
Durable heatprotective quality leather in the palm of this welding glove. Back of the hand in aluminised para-aramide. Hand is completely lined with para-aramid/cotton fabric and a Porelle membrane: water- and damp-proof. Sizes: 8-9-10-11.Length 45 cm.
Balaclava, inherently flame retardant. Quality: 60% Modacrylic, 39% cotton, 1% carbon thread. Complies with: EN ISO 11612 A1.B1.C1.F1, EN 1149-5, 61482-2 class 1. Available colors: Marine. available sizes: Universal.
Welding glove in top quality A-grade nappa leather with ergonomic protective cuff in red split leather. Extra comfortable because of a very high dexterity, an elastic on the back, a wingthumb model and strong kevlar seams. Suitable for industrial welding jobs (TIG) where high precision is required. Available sizes: 9, 10 and 11.
High shoe in black waterreistant full grain leather with synthetic toecap and synthetic antiperforation mid-sole. PU scuffcap. DryShield membrane. Sole in PU/PU. Sizes: D (36-48), XD (39-48).
Compact, rechargeable, durable, and waterproof headlamp, with lighting designed for proximity vision and movement. 450 lumens
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Ideal for light and delicate work requiring maximum tactility and suppleness. Polyurethane coating on palm and seamless lining on the back. Glove protects products against fingerprints, small particles left behind by gloves and other product contaminants.
Hood, Guardian H²O, flame retardant and antistatic, water- and windproof, breathable. Available in S-3XL
Flame retardant safety vest with RWS reflection. Quality: 100% Polyester with flame-retardant finish, 120 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS / S - 5XL. Compliant with: EN ISO 14116 index 1, EN ISO 20471: 2013 CLASS 2, RWS.
Multinorm jacket Vendat with electric arc protection: upright collar; Hidden snap button closure under trim; 2 patch chest pockets with flaps; 2 patch pockets with flaps; 2 loops for gas detectors; round sleeves; Sleeve narrowing by means of press studs. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260gsm. Available sizes: 44-64 EU. Available colours: Fluo yellow / navy. In accordance with: IEC 61482-2 : 2009 Class 1 - ATPV 9.4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / class 1 - A1 A2, EN 1149-5 : 2008, EN 13034 : 2005 + A1 : 2009 Type PB [6] and EN ISO 20471 : 2013 +A1 2016 / class 2.
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. With metatarsal protection XRD MET GUARD. Fitted with a breathable liner in textile. BOA-closing system. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Exceptional chemical protection gloves with tight fit for medium-duty and precision work. A two-layer liquid-proof nitrile coating with Guide XLNT™ technology ensures superior grip in both oily and dry envi ronments. Superb moisture management and an outstanding barrier against liquids and chemicals. The 18-gauge nylon liner provides high fingertip sensitivity in tough environments.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Full peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: blue, red, green, black, navy blue.
High quality red nitrile glove, 38 cm long and 0.425 mm thick. Solvex offers superior resistance to particularly hazardous applications in the chemical industry. Hence the success of this glove in the chemical, petroleum and paint industries, in relation to the transportation and processing of hazardous, corrosive substances and for working with detergents and solvents. Antistatic, silicone free.
Further perfected version of this all-round, high-cut safety shoe that has been a standard for years. The combination of top grain hide leather, leather lining, luxurious inner finish, extra- wide width and the self-cleaning and improved sole profile makes Merlot an exceptionally comfortable, robust, high-cut safety shoe. In additionn a new antistatic and antibacterial insole with integrated gel cushion provides optimal shock absorption. Sizes: 35-48.
Disposable ABEK gas filter made of plastic with rubber mouthpiece and nose bridge. Provides protection against organic and inorganic vapours, solvents, sulphur dioxide, acidic gases, ammonia and organic ammonia derivatives. Working time: at least 5 minutes. Packaged in plastic box with belt-or clothing clip. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Shelf life: four years (temeratures between -5°C to 50°C and humidity 90%).
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
ChemMax 3 PLUS with NeoSol EC27F gloves + PULL CORD.
Low shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Ultra-lightweight design (20% lighter than standard CUT D), without the addition of aggressive materials. 3x greater cut resistance (compared to other gloves made from the same material) using INTERCEPT cut resistance technology. 20% greater abrasion resistance thanks to FORTIX technology. Touchscreen, antistatic, EN16350, FOOD APPROVED. Sizes: 5-12 Complies with: EN388: 4X43D, EN407: X1XXXX
Heavy-duty, durable green/yellow gloves in neoprene combined with flocked natural latex. Thickness 0.70 mm. Excellent grip on dry and wet objects. Suitable for aeroplane assembly, battery production, chemical plants, electronics sector, agricultural chemicals and poultry slaughterhouses and processing.
Coverall, laminated, white, chemical overall for limited use, with a Saranex 23P barrier film. Protects against hazardous chemical spattersand sprays. Model with stitched and taped seams, two times zipper underflap, with hood and elastic at the wrists and ankles, reinforcement onthe knees.
Lab coat, Tyvek ®, 41gr. / M², anti-static treatment, inside seams, zipclosure, 2 patched pockets, collar. Available in: white.
The X-fit detect, including cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also re duces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate ba g. Colours: blue.
Coverall flame retardant and antistatic, 80% cotton 19% polyester 1% anti-static yarn, satin binding, 280gr./m², 2 chestpockets with flap, 2 patched side pockets, 1 meterpocket with flap, 1 back pocket with flap, elasticated back waist, hidden closure, retro-reflective bands. Available in: navy, orange, red, charcoal and black.
Work trousers in easycare material that ensures good retention of shape and color. The pants have two back pockets with flap and velcro closure, ruler pocket with knife button, adjustable knee pockets on the inside (two heights), reinforcement on the ruler pocket and knee pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
White seamless knitted gloves with red PVC dots on the palm for grip.
Orange Hiviz winterlined glove with seamless acrylic liner, water thight and fully latex dipped. Sizes: 8-11.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
Blue safety goggles type Skylite with soft grey DCT element. Offerscomfort and a profound protection, and adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame and clear polycarbonate lenses. All Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Low shoe Renzo S3 ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner (ESD). Outsole in PU/PU, resistant to fats and oils. Fitted with a half scuffcap.
IDRA 2 ABS safety helmet with integrated flip-up face shield (330x200mm/ 2.2 mm thick) made of polycarbonate, specially approved for short- circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (49-63 mm) with ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected particles, from grinders for example. Colour: white. EN170 (2-1.2) and GS ET 29.
Padded winter glove with synthetic leather palm and polyester back. Reinforced fingertips. Fleece lining. Windproof and waterproof membrane. Good grip. Velcro closure. Touchscreen compatible. Sizes 7-12. Complies with: EN388:2016 1.1.2.1.X and EN511 X.2.X
Hooded coverall with elastic face opening and chin flap for tight fit around respirator, stitched and over-taped seams, double self-adhesive zipper flap, double zipper and double cuffs, elastic cuffs, ankles and waist, thumb loops. 100% particle tight fabric, excellent barrier against a broad range of organic chemicals, highly concentrated inorganic chemicals and biological hazards. Antistatic treatment (inside).
High shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. BOA closing system. TPU-scuffcap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
CCTV sign. Dimensions: 300x200mm.
High shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-49.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Vibram outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Low shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in TPU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal and leatherfree. Sizes: 38-47.
High shoe recyclable in black full grain leather with steel toecap and antiperforation mid-sole. Sole in PU/Nitrile (Vibram), and insole in sanitized leather. Width: XXD. Sizes: 39-47. All materials are re-usable and shoe is fully dismantable.
Comfortable and lightweight slim-fit work trousers: - Increased back - Ideal for logistical work - Various storage options - Adjustable in taillle Quality: 65% polyester / 35% cotton, 245g / m². Available sizes: 42-66. Available colors: navy, royal blue and red.
Low shoe in leather/textile, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-47.
4-points polyester chinstrap,providing additional wearer comfort and helmet stability. Do not use with helmets 1100 EURO, 1125 EURO, Nexus Heightmaster and Vulcan.
2-in-1 shower gel for hair and body with skin-friendly sugar-based surfactant conditioner. With fresh unisex fragrance. Content: tube of 250ml PPE category: not applicable. Previous name: Stoko Hair<(> &<)>Body
High safety shoe in black full grain leather. Ankle protection in red leather. Wide perforated 200 J-steel toe cap (width 9). Antiperforation midsole. Flat Vibram outsole, excellent anti-skid tread. Reflective band on heelpiece. Special Isoltane insole for high temperatures. Sizes : 38-47. Conforms to EN 20345 S3 HI HRO SRC
Duolens glasses with modern fashion-look. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with twist temple technology for a perfect and non-slip fit. Polycarbonate lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. Frame: black/green.
