BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Low shoe in waterrepellent black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
Earmuff X2 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 31dB.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
All-round gloves, made of water and oil resistant cowgrain leather. Electra plus has artery protection and a latex cuff. Sizes: 7 / 8 / 9 / 10 / 11.
Polyethylene marker tape to clearly demarcate a danger zone. Delivered in a handy, cardboard carrying box. Width: 8 cm, length: 500 m. Colour: red/white.
Eye-volution – from a technical standpoint probably the most complete Uvex glasses. Temples, front and nose bridge made of DCT: hard on the outside, comfortably soft on the inside. Temples easily adjustable in length and inclination. Replaceable lens. Fitted with clear polycarbonate lenses that provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. PCF (Product Carbon Footprint) = 0,23kg CO².
Shirt, 60% merino wool 25% polyester 13% polyamide, 2% elastane, long sleeved crewneck shirt made of circular knit fabric, and has no lengthwise seams. The back is longer to prevent gaps, cuffs are knitted in.
The RIPEL technology prevents oil from making contact with the skin, keeping hands safe and dry. The lining is also made with ZONZ™ Comfort Fit technology for better fit and greater mobility so hands tire less quickly. The full nitrile/PU coating with FORTIX composite provides greater abrasion resistance and a better grip, so that the life of the gloves increases and they are more comfortable for heavy-duty applications. Silicone and latex free. Liner: Dyneema® Diamond Technology. The colours camouflage dirt so the glove can be worn longer. Sizes: 6-11. OekoTex certified.
Cut resistant knitted glove with a foam nitrile coating. The liner or support is made of HPPE, nylon and glass fibre. The foam nitril coating guarantees a fine grip on oiled surfaces. Extra reinforcement between index and thumb. This thin glove combines a medium cut-resistance level (class B) with high comfort (lightweight and dexterity). Applications: General industrial work like machine maintenance or treating sharp oiled objects. Available sizes: 7-11.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant textile liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49 (L) en 41-49 (XXL).
Bottle Afterwash II, 200ml: this solution restores the eye's physiological balance, reducing the unpleasant feeling caused by chemic al splashes.
Guide 6202 CPN - A cut, puncture and needle resistant glove in soft synthetic leather for good versatility and a steady grip. Alycor etechnology in the palm, over the fingertips and the upper surface of the fingertips; protects from needles and other sharp objects. Designed particularly for situations where it is vital to keep sensitivity and where there is a risk of needle puncture and cut injury. The glove is designed fully in black to achieve as low profile as possible. Suitable for police and customs officers, security guards and prison officers where there is a risk of needle puncture and cut injury. Sizes: 6-13
Lightweight, lower-profile ear muff X4 with shells in TPU/ABS, with highlighted colors for better visibilty. Utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. Easy adaptable with 'grip areas". Durable, ergonomic and very lightweight with high protection against noise. Combinable with respiratory- and eyeprotection. SNR: 32dB.
Comfortable high visibility parka with permanent lining. Model with twoside pockets that have a Velcro closure, inside pocket. The tricot wind cuffs in the sleeves protect against cold and wind. Bi-directionalzippercovered by storm flap with press-studs.
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The coated knuckles and the double coating in the palm provide excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Coverall, 63gr./m², microporous fim laminated, good moisture vapour transmission, three-piece hood, antistatic, elastic at hood, elastic at wrists, elastic at ankles, elastic at waist, zip closure under flap, 3- threads overlock and taped, breathable back in Safegard blue. Available in: white.
Water-reppelant boot in PVC for professional use without without extra protection. Lining in white polyester. Resistant to low concentrated acids. Sizes: 35 - 47. In line with the CE standards.
Safety knife with an additional slider on the back of the cutter. For work with triple-walled corrugated board boxes. MAXISAFE adapts to the type of cut required at the time, be it sideways, horizontal or straight from "up top". Designed for a minimum of effort at a maximum of efficiency. Ergonomically styled plastic handle with metal wear- protector at the blade outlet.Welcome the safest and most versatile knife mechanism in the world! For use by right- and lefthanders. "GS- TESTED FOR SAFETY". Easy blade change: no extra tools required. No PPE. Blades: 1024827
White laboratory jacket with zipper, made of polypropylene (40 g/m²). Without hood or pockets. Available in: white. Sizes: M - XXL.
Cut resistant, completely seamless grey knit gloves with black nitrile coating. Excellent tactility combined with highest level of cut protection, even on oiled objects. Sizes: 8 / 9 / 10 / 11.
Industrial protective glove. Synthetic textile liner with a synthetic coating. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF- free, antistatic and food approved. Sizes: 6-11.
Safety glasses Silium PC Blank with synthetic frame, glass with anti-vapour and anti-scratch coating. Provides protection against impact risks and UV radiation.
Extra high welding shoe in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with an extra large velcro for optimal fitting and breathable, abrasion resistant liner in textile. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Fire proof stitching in para-aramide. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-48.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
1 pair light red hearing protector for attachment to helmet, made of combination of plastic and stainless steel. Ergonomic design. The ideal protection against noise from compressors and pneumatic tools. Model for direct attachment to every helmet with universal 30 mm slot.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable 3D-mesh liner. Outsole in PU/E-TPU/PU rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. A natomical, perforated. 100% metalfree. Sizes: 35-48.
Extra thin, blue latex gloves with excellent sensitivity. Specially treated to reduce the chance of allergic reactions.
IDRA 2 ABS safety helmet with integrated flip-up face shield (330x200mm/ 2.2 mm thick) made of polycarbonate, specially approved for short- circuit arc welding (marking 8) and protection from molten metal particles (marking 9). This high-quality shield also has an N approval, which stands for anti-fogging. Impact resistance of 120 m/s (marking B). With 4-point textile suspension (49-63 mm) with ratchet and leather sweatband. The helmet is especially good for work in switch boxes and where there is a risk of ejected particles, from grinders for example.
Fleece, 100% polyester anti-pilling, 280gr / m², zipper
Pilot Jack, 60% cotton 40% Polyester 240g, Shower Proof Lining: 100% Polyester Zip Out Fur Liner 440g, Wadding: 100% Polyester 50g, Zip out sleeves, Secure sleeve pocket, Zip out fur lining and collar, Spacious pockets. No PPE
Heat resistant glove in full grain goatskin on the palm and full grain cowhide on the back of the hand. Fully Kevlar lined. Reinforces thumb, index and seams. Oil and water repellent. For use in harsh and moist environments. Size: 7-13.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level E, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ea r canal for improved comfort. Available in a disposable box containing 200 pairs, each pair in a separate bag.
P3 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against toxic dust, mist and smoke par ticles.
Thermally insulating intermediate jacket made of quilted nylon, two pachted pockets, one inserted chest pocket,zip closure. This thermal liner with sleeves is worn separately abovethe work clothing or zipped into the Operator parka. Available in: black. Sizes: S - XXXL.
Low shoe in water repellent velour leather, with a synthetic anti- perforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole Crazy+ in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
High shoe in waterresistant black full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
Grey metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Adjustable nose pads and adjustable temples. The side protection in clear polycarbonate and riveted.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
Coverall with hood. Stitched and over-taped seams. Thumb loops. Elastication at wrists, ankles and face. Elasticated waist (glued-in). Tyvek® zipper. Self-adhesive zipper and chin flap. White with bright orange tapes. Antistatic (inside). Additional taping of cuffs, ankles, hood and zipper flap required to achieve Type 3 liquid tightness
Chin strap made of webbing (woven textile). This model is supple and suitable for Centurion Spartan, 1100, 1125, Concept. Suitable f or: work at height, general industrial applications. Not separately certified as PPE.
Extra high shoe in full grain leather, with synthetic anti-perforation sole and synthetic 200J toecap. With Goretex membrane plus Thinsulate lining. Vibram® sole: 100% rubber, SRCanti-slip. Sizes: 38-47.
Beard mask, polypropylene, latex free, fitted with one elastic. Available in: white. Applications: agro-food industry, hygiene, transport, services. Pack of 100 pieces. Weight: 10g/m². No PPE.
White/Blue Boot in PU, provided with a steel 200J toe cap. Lining in red branded PU. Sole in extra thick PU, antistatic, oilresistant, energy absorbing and cold insulating. Excellent for food industry. Sizes: 35/36 - 49/50.
Low shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a Gore-Tex membrane. Outsole in TPU/PU, SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. 100% metal and leatherfree. Sizes: 38-48.
Hi-vis vest in 100% polyester with zip. Available colors: Fluo yellow and fluo orange. Available sizes: S-3XL. Compliant with: EN ISO 20471 Class 2.
Low-cut, light, metal-free, perforated safety shoe in textile with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU. ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Balaclava, modaflame knit, 60% modacrylic, 39% cotton, 1% carbon fiber, 200g / m². ATPV: 4.3 cal/cm² (fabric).
Metal safety glasses in antique silver color, with polycarbonate lenses to protect against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. The side protection in clear polycarbonate and riveted. Separate matching pouch available.
Low shoe Renzo S3 ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner (ESD). Outsole in PU/PU, resistant to fats and oils. Fitted with a half scuffcap.
Seamless lined glove with nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Nylon carrier.
Dust filter holder for attachment of dust filters 5911, 5925 and 5935 to 3M gas filters. Also for use in combination with filter hol der 603 for direct connection of dust filters 5911, 5925 and 5935 to 3M half and full face masks.
Super lightweight, perfectly balanced safety helmet in strong ABS, ventilated. With 6-point textile interior (52-64cm) and highly absorbent hydro-flock sweatband. Very large surface area for personalisation. With a rain channel and unique drainage system. With European 30mm slot for attachment of hearing and face protection. With retractable glasses, impact B (!), suitable for wearing with prescription glasses. These glasses have a soft adjustable nose-bridge and can easily be replaced. Manufacturing date is noted near the glasses in the black plastic. Accessories: badge holder, bulb holder, reflective strips, replacement glasses. Colours: white, yellow, blue, red, green, orange, black.
Cap, 100% polyester fleece, 280 g / m², Insulatex lining.
High safety shoe in microfiber with a synthetic toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant. 100% metal- and leather free.
Low shoe S1P in perforated microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Disposable ABEK gas filter made of plastic with rubber mouthpiece and nose bridge. Provides protection against organic and inorganic vapours, solvents, sulphur dioxide, acidic gases, ammonia and organic ammonia derivatives. Working time: at least 5 minutes. Packaged in plastic box with belt-or clothing clip. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Shelf life: four years (temeratures between -5°C to 50°C and humidity 90%).
Underpants, 60% merinowool 25% polyester 13% polyamide 2% elastane, long johns are made of circular knit fabrik and have no lengthwise seams. A gusset in the back ensures optimal comfort. Cuffs are knitted.
Low shoe glove in water repellent black nubuck. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and perforated insole in EVA. Reinforced laces. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Safety helmet with integrated face shield (class 1) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Men's polo with short sleeves, modern polo piqué in stretch, fitted fit, three-button tone-on-tone, neck tape and side vents. Quality: 95% cotton, 5% elastane, 215 g / m². Available sizes: XS-4XL. Available colors: White, red, navy, gray, green and black.
Blue powder-free nitrile glove for applications in food industry. Bio degradable. Package: per 100 gloves!
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Fitted with chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.
Safety glasses in grey Polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (21g). Foreseen of a an adjustable nose bridge and TIPGGRIP temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging. Protects against UV-radiation. EN 172 5-2,5.
4-points polyester chinstrap,providing additional wearer comfort and helmet stability. Do not use with helmets 1100 EURO, 1125 EURO, Nexus Heightmaster and Vulcan.
Buff flame retardant and antistatic in 87% Nomex®, 5% Kevlar®, 4% elasthane, 4% carbon fibre. Keeps bodytemperature in cold environments. Protects against heat, flames and static electricity. Dimensions: 24,5 cm x 54 cm. Available colours: navy, red, green, beige.
FFP3 premium flat-fold mask. Exhalation valve. Practical individual packaging. Adjustable head band. Particle-filtering folding mask with exhalation valve. Color: white. Also available with carbon filter. D label (dolomite dust test passed): maximum breathability even with really high dust levels Cannot be reused. Comfort features: exhalation valve reduces breathing resistance and build-up of heat and moisture in the mask. Fexible and adjustable nose clip. Soft sealing lip guarantees a secure, comfortable sealed position of the mask. Soft material edges for high wearing comfort. Area of use : Construction and related industries – asbestos: work of very limited scope, disposal/cleaning: contact with radioactive contaminated dust, disposal/cleaning: handling of medical waste, woodworking: sanding/brushing off paint containing chrome, woodworking: sanding/brushing off water-soluble paints containing copper, chrome or arsine, wood working – hard wood (oak, beech, tropical wood): grinding and cutting, agriculture: treatment of sick animals/animal diseases, agriculture: handling mould spores, medicine/nursing/health: bacteria, viruses, infections, Legionella, metal processing – high alloy steel/stainless steel: drilling, grinding, milling, welding: hard soldering, welding: welding of stainless steel and aluminium . Safety features: certified FFP3 face mask to EN 149 and EU Directive 89/686/EEC.
Black safety boot in PVC, fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Hi-vis ambulance parka with concealed zip, adjustable sleeves, 2 vertical front pockets, Napoleon pocket, radio pocket, radio loop, badge holder and round velcro zone badge on left sleeve. Including fixed hood. Quality outer fabric HIVIZ: 100% polyester + PU coating, 200 gr / m². Quality outer fabric Enamel: 100% Polyamide Lining: 100% PES mesh (fixed comfort lining) Yellow reflective prism bands Available colors: Fluo Yellow / enamel blue. Available sizes: XS-4XL. Conforms to: EN ISO 20471 Class 3, EN 343 4.4.
Practical plastic helmet hearing protector with patented technology that dampens the entire frequency range equally so the sounds ca n be heard softly yet without distortion. The perfect protection for low noise levels and applications involving electricity. Only f or attachment to safety helmets.
