BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
J-Energy series. High shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. Sizes: 38-48.
High black safety shoe S3 HRO with steel toecap, steel sole plate over-toe, made from full grain cowhide leather. With SympatexAirflow inner lining, air conditioning for your shoe, bacteria and virus repellent. A 100% polyester membrane that is waterproof from the outside, but lets sweat from the inside out through the lining layers; a breathable shoe. Complete insole: anti-bacteriological, moisture absorbing, breathable, washable, anti-static. Provided with a polished water-tongue. Light sole (rubber soles with polyurethane insole), high abrasion resistance, anti-static, anti-slip, oil, gasoline-acid resistant. With quality support insole. Fit XD.
Hi-vis rain jacket with detachable bodywarmer / Multifunctional 4 in 1 product / Can be used in all weather conditions / / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Comfortable / Supple / High tear resistance / Taped seams / Outside: Straight collar / Foldaway hood in collar / Zip closure under flap with touch <(>&<)> close fastening / 2 inset pockets / 1 Napoleon pocket / Kimono sleeves / Elasticated wristband with narrowingby touch and close fastening / Drawstring in waist / Back length 85 cm (L) / Inside: Fixed mesh lining / Knitted wind cuffs in sleeves / 1 / Inside pocket with zip closure / Zipper in back lining for placing logos / Fabric: SIOPOR® Ultra: / 100% polyester / Fabric with / 100% PU coating; ± 195 g / m² Colour: 320 hi-vis yellow / green - 717 hi-vis red / grey - 065 hi-vis yellow / navy - 279 hi-vis orange / navy
Low-waist working trousers in 65% polyester/35% cotton. Triple stitched, Knee piece in CORDURA® for extra abrasion resistance. Kneepads available seperately (1029639) and placeable on 2 heights. 2 thigh pockets (left & right), hammer loop, d-ring, back pocket with flap. Double hem for +- 6cm extralength. Thumb pokcet. Available sizes: 36-58. Available colours: Grey/Black, Darkgrey/Black, Khaki/Black, White/Grey, Black, Navy, Royalblue/Navy. Stockarticle in Darkgrey/Black, 42-52
Grey safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Comfortable nose bridge. Integrated side, bottom and top protection with indirect ventilation.
Cut resistant glove made with the latest Dyneema® Diamond technology and a gray, abrasion resistant PU coating. Guaranteed cut resistance (level B) combined in a lightweight glove. (up to 30% lighter). A "breathable" glove, finger-sensitive and a good grip make this a comfortable "second skin". No use is made of glass fiber. According to EN388: 2016: 4.4.4.2.B
Cut resistant glove without seams with black silicon-free PU coating. The coating gives a good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, dueto very dens knitting, a very high cut resistance. Usage: Situationswhere adhesion, cut resistance, tear and perforation are required, suchas packaging, assembly, the automotive industry, the glass and paper industry.
J-Energy series. Low shoe in nunuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breat hable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Further perfected version of this low-cutsafety shoe that has been a standard for years. The combination of topgrain hide leather, synthetic lining, the extra-wide width and the self-cleaning andimproved sole profile makes Muscat an exceptionally comfortable, robust,low-cut safety shoe. In addition, a new antistatic and antibacterial insole with integrated gel cushion provides optimal shock absorption. Sizes: 35-48.
Charlotte clip, polypropylene, latex free, diametre 53 cm, 10gr. / M², elastic closure, Available in: blue, green, white, red. No PPE.
Boot in white PU, durable and lightweight, with steel toecap. Liner in textile, inlay in micro cellular latex with felt layer. Outsole in PU, with good antislip resistance (SRC). Temperature resistant up to -40°C and +100°C, oil, fat and fertilizer. Good chemical resistance, better antislip profile, higher toecap and bigger fit.
Seamless knitted Kevlar glove, with palm and finger coating in natural rubber. Excellent cutting resistance and good grip due to rough finish.
Low-cut safety shoe in grey velour leather with perforated upper foroptimal ventilation. Fitted with a perforated steel toecap and s teelantiperforation midsole. With hygienic Cambrelle lining and resilient dual density Softane walking sole. Sizes: 36-47.
Knitted bleached cotton, fourchette style, hemmed edge, standard version, sizes 7-12. No PPE
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
High shoe in waterresistant black nubuck leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/VIBRAM, SRC antislip. Sizes: 39-47.
Low-cut, black safety shoe in smooth full grain leather with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: D (35-49), XD (37-49).
Glove in water-repellent cowhide leather that should be worn over electrical gloves as mechanical and puncture protection (not mandatory for composite models). More spacious model that easily fits over electrical gloves with a velcro closure for an ideal fit. Check the technical datasheet to determine the correct size.
High shoe in black waterproof full grain leather, with lining in textile Sany-Dry. Equipped with a non-metallic 200J toecap and non-metallic antiperforation insole. The laces are protected by a spark-resistant leather cover. AIR antistatic insole provides stability. Abrasion resistant outsole in PU/Rubber, resistant to hydrocarbons and temperatures up to 300°C. Antistatic. Sizes: 39-48. Weight: 710g. ISO 20345:2022 S3S HI CI HRO LG SC FO SR
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable GORE-TEX liner. Outsole in PU/VIBRAM rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. A natomical, perforated. 100% metalfree. Sizes: 38-47.
Bomber, 100% polyester, 300D Oxford weave, with stain resistant finish, 190gr/m² PU coated. Detachable fur liner, removable sleeves and detachable collar, ID-pocket, security sleeve pocket.
Jacket, Guardian H²O polyester, 260 gr/m², zipper under flap, lined, hood also available. Concealed zipper and velcro closure at centre front, chest pockets with safety flaps and velcro closure, inside pocket at left hand side, goggle pocket behind storm flap, lower pockets with safety flap, lower side entry pockets with blind zipper closure, adjustable velcro closure at cuffs, adjustable puller at hem, fully taped seams, reflective striping.
Comfortable helmet for work and interventions at height and difficult to reach locations. Is fitted with extra-sturdy chin strap closure so the helmet remains in place during a fall. This helmet has no obstructive sun visor, which would obstruct sight while climbing on constructions and manoeuvring through small spaces. Made of indestructible, durable,lightweight polycarbonate. High energy absorbing capacity upon impactduring a fall, both on the top and side of the shell. Equipped with attachment points for helmet mounted light as well as face and hearing protection. Lifetime: 10 years. Universal size, range 53 to 63 cm.Weight: 465 g. Available in: yellow.
A glove with high finger sensitivity provided with a nitrile foam coating on a dark gray medium gray nylon. Made upon the principle: Hybrid Coating Technology. Resistance abrasion perfect and very comfortable to wear. The lining extends to the joints (knuckle coated = KC). The glove is also Oil fugue, more resistant than the PU and is also more resistant when heating the PU. Ideal for any activity where sensitivity in the fingers is necessary as the assembly, assembly, packaging, automotive, etc.. Sizes available: 7-11.
Signa fleece in 100% polyester with navy sleeve ends and band around the lower body, 300gr./m², anti-pill finish, can be worn separately, zip closure, two pockets and a comfortable inner lining. Available in: fluo orange/navy, fluo yellow/navy. Sizes: S - XXXL.
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Boot in black water repellent full grain leather, with a warm fleece lining. The boot has an easy zip on the inside. Fitted with a steel perforation sole and 200J toecap. The toecap has an extra protection layer. Antistatic insole with moisture control system for a comfortable feeling. Equipped with a shock absorbing insole from Uvex 3D Hydroflex. Outsole in PU 2 densities, specially shaped for better slip resistance. Sizes: 38-50.
ABEK1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5 935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%. Suitable for : processes involving chemical risks.
Seamless waterproof nylon glove with thin double nitrile coating. Good dexterity, grip and elasticity because of lining. Length: 30cm. Antistatic, latex and silicone free, food approved .
T-shirt, 100% combed cotton, 145gr/m², sturdy four-layer rib collar
Low-cut, sporty safety shoe in nubuck leather with steel toecap and antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Leather insole and padded tongue.
High shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-49.
Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. With BOA closing system. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Towel 100% cotton, 400 g/m², 70 x 140 cm. Available colors: White, black, red, light blue, royal blue and gray.
Supported blue natural rubber glove. Seamless made for comfortable wearing. Wrinkled finish on the hand for perfect grip in wet and dry conditions. Very smooth and very good dexterity. Ideal for use in the fishing industry, oyster fishing, cleaning, chemical cleaning, wet and dry use and general use with food.
Hazmax S5 safety boot in ultra chemical resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: green. Available: 35-47.
Boot in black PU, durable and lightweight, with synthetic antiperforation sole and toecap. Liner in textile, inlay in micro cellular latex with felt layer. Outsole in PU, with good antislip resistance (SRC). Temperature resistant up to -40°C and +100°C, oil, fat and fertilizer. Good chemical resistance, better antislip profile, higher toecap and bigger fit.
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Full peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: blue, red, green, black, navy blue.
Contemporary work trouser that fits as good as it looks. Made from durable poly-cotton canvas fabric and includes triple stitched seams, these trousers have been built to last. Innovative design features like stretch panelling provides excellent comfort and flexibility in key movement areas. Other practical features include high rise back waistband with side elastication, knee pad pockets offer extra protection in all working conditions and multiple pockets provide secure storage. Quality: 65% polyester / 35% cotton. Available sizes: 28 - 48. Available colors: Gray and blue.
High-tech ambulance sweater with stand-up collar, segmented reflective bands and adjustable closure. Quality: 70% polyester / 30% cotton, 310g / m². Color: fluorescent yellow / enamel blue. Available sizes: XS-3XL. Conforms to: EN ISO 20471 Class 2.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 5,000 volts, operating voltage of 1,000 volts. Length 41 cm, Sizes: 7-12.
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 64%, Polyamide 35%, Elastane 1%. Sizes: 36/39, 40/44, 45/48. No PPE.
Trousers A2058687 in 65% polyester 35% cotton, 245 gr./m²,industrial washable and dryable, two inserted pockets. Available colours: Navy/Royal Blue, Royal/Navy, White/Grey, Grey/Navy, Black/Grey, Green/Khaki. Available sizes: 36-64.
High shoe in waterrepellant black pull-up leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-meshmaterial. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Polyurethane insole Soft+ Gel with textile layer. 100% metalfree. Sizes: 35-47.
Safety knife with automatic blade retraction. Suitable for left- and right- handed people. Aluminium handle with renewed and simple blade change. Cutting depth: 21mm. Replacement blade: 60099 (1021313). No PPE.
High quality red nitrile glove, 38 cm long and 0.425 mm thick. Solvex offers superior resistance to particularly hazardous applications in the chemical industry. Hence the success of this glove in the chemical, petroleum and paint industries, in relation to the transportation and processing of hazardous, corrosive substances and for working with detergents and solvents. Antistatic, silicone free.
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.
Gloves made of sturdy, top-quality cowgrain leather with wplit leather back. Has a perfect fit, reinforced seams along the fingers and high tactility.
Low shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.
Safety knife with laminated single blade, sturdy and functional For cutting double cardboard, paper, foil and straps. The single-sided blade can easily be reversed and replaced. Replacement blade always available in holster. Replacement blades: 1025552.
Black powder-free biodegradable 100% nitrile glove. Completely silicone free. Chlorinated glove to offer more comfort and to reduce tackiness. Antistatic. Package size XXL : 90 pieces.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
High shoe in microfiber/textile, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Insole; Available in different heights: Level 1 (large), Level 2 (standard), Level 3 (small); Very good moisture absorption and release properties; wear-resistant; Suitable for all ESD-compatible safety shoes certified with this insole.
Ultra-thin, antistatic gloves with polyurethane coating on palm and seamless lining on the back. Excellent tactility.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives<(>,<)> formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
Water and chemical resistant high shoe in coated leather, with a steeltoecap and antiperforation sole, waterresistant padded tongue. Anti-transpirant liner in Sympatex membrane Airflow. Leather insole, outsole in nitrile and polyurethane, oil-, petrol- and acid resistant, antistatic and antislip. Colour: black/grey. In line: ISO EN 20345 S3 HRO SRC.
Super-light (300 g) safety helmet made of strong ABS. With 6-pointtextile suspension (52-64cm), a handy ratchet and highly absorbenthydro-flock sweatband. This version has extended neck protection withoutventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Available in: white, yellow, blue, red, green, orange.
Blue safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Comfortable nose bridge. Integrated side, bottom and top protection with indirect ventilation.
Earmuff X2 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 31dB.
Black low shoe with synthetic toecap and antiperforation sole. Made of smooth buffalo leather containing a synthetic 3D liner, padded tongue and heel part. Antistatic insole in synthetic absorbing material. Outsole in double density polyurethane with heel, high resistance, antistatic, high anti slip, oil and petrol resistance. Updated version of the Buffalo Light with better ergonomic properties and big size range. 100% metalfree. Sizes: 35-48.
Low shoe in velours, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time. 100% metalfree. Sizes: 35-48.
Tracker II hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and is ventilated laterally and at the top. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
Light and thin glove made of seemless knitted nylon/carbon fibre with micropourous nitrile coating. Especially for touch-screen and ESD applications. Sizes: 6-11.
The socks have excellent insulating functions and retain heat even when wet. They absorb and transport perspiration away from the skin without losing their function of heat retention. Socks have terry knit feet and rib knit shafts. Merino wool 50%, Polyamide 45%, Elastane 5%. Sizes: 36/39, 40/44, 45/48. No PPE.
Protection film for screen as accessory of hoods M-106, M-107, M-306, M- 307, M-406, M-407. No PPE.
Unpowdered latex gloves with high tactility. Universal model that can be worn on either the left or right hand. Ideal for protection of delicate products, for light maintenance and as protection of the hands against irritating products.
