BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Single gas detector with limited lifetime of 2 years, no maintenance or calibration required. Device is equipped with a self-test, to be performed before use. Display only shows remaining months of operation, no concentrations. Device with O2 sensor with alarms at 19.5% and 23.5% Vol. (min. 18% and 25% Vol.) Measuring range: 0-25% Vol. Compliant: Ex ia IIC T4. IP class 67 and Atex approved.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 5PPM and 10PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use. CAUTION: The infrared LEL sensor does not measure hydrogen (H2) and acetylene (C2H2).
Bottle of 58 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
Replacement battery for gas detector BW Solo
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Kit to activate IntelliDox. Includes power supply with region-specific AC power cord, ethernet cable, inlet (purge) filter assembly,3 ft. / 1 m calibration gas tubing, 3 ft. / 1 m purge gas tubing, 15 ft. / 4.5 m exhaust tubing, quick connect fittings.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Reliable and easy to use single gas detector. It works maintenance free for up to two years, just switch it on and it works continuously - no need to charge the battery or even replace the sensors. That means great reliability and no downtime.
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. Low alarm: 20ppm, high alarm: 100ppm
Auxiliary filter adaptor to protect sensors of the BW Flex, Flex-i. Without filters and with filterclip to assemble filters on detector.
Reusable multi-gas detector detects %LEL, H2S, O2 and CO simultaneously. Semi-annual calibration required. Battery autonomy: approx. 48u. With catalytic filtered LEL sensor are calibrated to methane by default. Suitable for very many applications, but less suitable for heavier compounds (C5 and above), not suitable for inert applications. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST..
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW FLEX and BW ICON Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and not for 3-year life detectors!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS CO with alarms at 20PPM and 100PPM. Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO, VOCs.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low and high alarm :4ppm
The SST1 single gas detector provides up to two years of maintenance-free operation and is available in H2S, SO2, CO, or O2 models. Its simple design makes it perfect for users looking for ultimate protection while being easy to use, durable, and cost-effective. low alarm: 2ppm, high alarm 4ppm.
Replacement battery for GasAlertMax XT II
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXT is fully compatible with BW MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: 02 and (filtered) LEL. IP rating 65 and Atex approved.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values HCN: 1,0-4,7ppm.
The easiest single-gas detector for Ozone to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Plug for connection USB cable of the HGAS-HTRAM CO2 detector..
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option and only for 2-year detectors) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: 3 YEARS H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Bracket for wall mounting of test gas bottles of gas of 34, 58 and 110 liters.
CO2 measuring device to monitor indoor air quality. Unique design, look and feel, easy to use. Clear indication of the CO2 concentration on the display. Adjustible visual and acoustic alarm settings. Algorithms that indicate the air quality based on CO2 and type of actifity. Measuring range: 400 to 2000ppm, temperature: -20°C to 60°C, humidity from 0% to 100% RH. Life span at least 36 months, does not require calibration. The HTRAM calibrates itself every 7 days. USB cable for charging is included, plug must be ordered separately 1051636. Standalone device, can not longer be managed or monitored with an app.
Filters to protect Gasalertmax XT pump. Kit with 5 filters.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. Version: O2, CO. IP rating 65 and Atex approved.
Bottle of 110 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. .
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
Aluminum bottle of 58 liters with test gas for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077) Always to be used with the release valve 1062078. Contents: 18%O2 / 2.2% CH4 / 50 ppm CO / 10 ppm H2S in N2. Certificate included.
Area monitor, suitable for indoor and outdoor use at temperatures from -40 to +60°C. Up to 8 weeks of use. One-button operation, easy smartphone setup via the user-friendly mobile app for alarm settings, calibration data, etc. Pumpless version with Bluetooth, filtered catalytic LEL sensor (0-100% LEL), CO (0-500 ppm), H2S (0-100 ppm), and O2 (0-30% vol).
New portable 4-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO.
The durable GasAlertMax XT provides reliable monitoring of up to four gas hazards and combines simple, one-touch operation in the field with an integrated suction pump. It is ideal for use in enclosed areas. The one-touch controls on this multi-gas detector make it exceptionally easy to use and significantly reduce the time required to train the user. The GasAlertMax XT is fully compatible with MicroDock II, the automated testing and calibration system. It incorporates vibrating and loud audiovisual alarms that continuously show the measured values. It has an integrated pump for remote sampling and is supplied with a 3 metre pump hose, 5 pump filters, a rechargeable battery and charger. It is also equipped with a sturdy clip for attaching it to clothing. It includes a two year guarantee. Version: 02. IP class 65 and Atex approved.
Bottle of 110 liters with test gases for calibration of gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%).
Easy-to-use intelligent and compact multi-gas detector for easy reading of measured values on the large, high-resolution display. Long battery life. BW FLEX4 detector with O2, CO, SO2 and filtered catalytic LEL sensor.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO,NH3.
Filters to protect sensors.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXT is fully compatible with BWs MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: 02 and (NOT filtered) LEL. IP rating 65 and Atex approved.
The IntelliDoX system combines smart docking modules and Safety Suite software to provide automated instrument management for BW Solo gas detectors - helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,CO,VOC'S.
Gas detector reusable multigas detects %LEL, H2S, O2 and CO simultaneously. Including batteries and induction charger. Equipped with NFC and a large display that clearly shows information. Correction factors can be set with the WatchGas SST Range app. The device is robust and is equipped with stable sensors that remain reliable under extreme temperatures and conditions. Can be calibrated every six months. Alarm values low and high: O2 19.5%-23.5%, CO 35-200PPM LEL 10%-20%, H2S 10-15PPM. Equipped with an unfiltered LEL sensor.Alarm settings can be set to the user's preference with the SST Docking Station (1062077) and the Watchgas app.
The SST Dock is an automated test station that allows Bump and Calibration testing and is compatible with the full SST Range in one module. It has the capability to be connected via Wi-Fi, BLE or Cellular and allows for desk, wall and hard case mounted dependent on your application.
Charger 12-24V gas detector for Gasalertmicroclip, Quattro and MAX XT to charge in the car.
chemical risks.
