BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Filters to protect sensors of the SST1 detectors.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Catalytic filtered LEL and O2 H2S/CO and CO2 sensor.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Catalytic unfiltered LEL and O2 H2S/CO and CO2 sensor.
Test cap as a spare part of the SST1, needed to bump test and manually calibrate the device.
Replacement clip including screws for all SST series detectors.
Multi-charger to fit all SST4 detectors. Standard for 5 detectors, expandable to charging station for 20 detectors, a coupling cable (1062815) is required per additional rack (1062814).
Additional module to extend the multi-charger for SST (1062812) with additional 5 charging slots. One coupling cable (1062815) is required per additional module. (not included).
Coupling cable to extend the mulitcharger (1062812) with an additional module (1062814). A coupling cable is required for each additional module. Up to 4 modules for a total of 20 devices can be placed on top of each other.
Test cap as a spare part of the SST4 Micro, needed to bump test and manually calibrate the device.
Test cap as a spare part of the SST4 Mini, needed to bump test and manually calibrate the device.
External pump for portable gas detectors without built-in pump. To be connected to a hose of max. 15m. Designed for evacuation, measurement, for example in tanks and shafts.
Aluminium bottle of 58L with test gas H2S 10PPM for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077). Always to be used with regulator 1062078.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Replacement battery 3.6V for gas detector serviceable Watchgas SST1
Single gas detector with limited life of 3 years without maintenance. Displays only remaining lifetime on screen, no concentrations. H2S with alarms at 1.6PPM and 3.2PPM. (min. 1.6PPM and 20PPM)
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Manual pump with 30 cm probe and filter for gas detectors GasAlert, Icon and Icon+.
