BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
KWIK-DRAW CHARCOAL FILTER TUBE ADS
Bottle of 12 liters with 4 test gases for bumping 4-gas detectors. Content: CH4 (2.2%), O2 (18%), H2S(25PPM) and CO (100PPM).
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip Series, GasAlertMicroClip Series and ConneX1 gas detectors - helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Measuring tube to be used in combination with hand pump 1028962 to measure concentration.
Bulb and tip breaker for smoke tubes for establishing and checking air currents when checking ventilation systems, for the detection of leaks in pipelines, stoves and windows, and checking ventilation systems in mining. No PPE.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings). Version equipped with SRD to pick up signal from beacons!
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,VOCs.
As spare part of the RigRat.
Impact protection for BW Ultra display, clicks onto the device.
Black silicone adjustable bracelet for E-B10.
Demand flow valve with pressure sensor with connection to docking station (1062077) to provide automatic pressure alert via e-mail or on the docking station. To be used with watchgas gas cylinders for calibration or bumping.
Programming cable for Twig Atex One to connect the device to a PC. Attention: charging in an Atex zone is not allowed!!
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 18h. With catalytic (unfltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Aluminum bottle of 116 liters with test gas for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077) Always to be used with the release valve 1062078. Contents: 18% O2 / 2.2% CH4 /50ppm CO / 10ppm H2S in N2. Certificate included.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Catalytic filtered LEL and O2 H2S/CO and CO2 sensor.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Infrared LEL and O2 H2S/CO and CO2 sensor. It is not suitable for detecting hydrogen (H2) and acetylene (C2H2). Can be used in situations where no oxygen is present.
Multi-charger to fit all SST4 detectors. Standard for 5 detectors, expandable to charging station for 20 detectors, a coupling cable (1062815) is required per additional rack (1062814).
Hydrophobic filter to protect the pump of the SST4 pumped.
Aluminum bottle of 58 liters with test gas for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077) Always to be used with the release valve 1062078. Contents: 18% O2 in N2. Certificate included.
Aluminium bottle of 58L with test gas CO 50PPM in Air for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077) Always to be used with regulator 1062078.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Single gas detector with limited life of 3 years without maintenance. Displays only remaining lifetime on screen, no concentrations. H2S with alarms at 1.6PPM and 3.2PPM. (min. 1.6PPM and 20PPM)
Neckband for gas detector Gasalertclip or GasAlert Extreme to carry on chest. Equipped with security that decouples detector if traction on the neckband.
Holster in black leather and PVC GasalertmicroclipXT and GasalertmicroclipXL gas detector. Supplied with clothing clip.
Charging station to charge 5 gas detectors Gasalertmax XT simultaneously.
Aluminium 34L bottle of testing gas CO 100ppm in oxygen.
Testgas NH3 25PPM cylinder 34L. Only for use in combination with pressure reducer.
Testgas NO2 5PPM aluminium cylinder 34L. Only for use in combination with regulator 1015148.
Handy carrying strap for Twig around the neck. Man down alert may react differently by using this lanyard.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. Version: O2. IP rating 65 and Atex approved.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Sensors must be deactivated separately as required. Version: O2, H2S. IP rating 65 and Atex approved.
Measuring tube to be used in combination with hand pump to measure concentration.
Measuring tube to be used in combination with hand pump to measure concentration. Measurement mg/m3.
UNIPHOS™ ASP-40 Air sampling pump is a one stroke pump with built-in tip breaker and shard reservoir. This ensures safe and clean working and guarantees a reliable analysis. To use with Uniphos, Kitagawa, RAE, Gastec, Kwik-draw, MSA and Dräger gas detection tubes.
Testgas HCN 10PPM cylinder 34L. Only for use in combination with pressure reducer.
Mandown alarm in the form of a compact GSM device. Supplied with charger, USB adapter, USB cable and clip for wearing on your belt. Provides automatic alarm via SMS or call to max. 10 pre-programmed telephone numbers. Alarm is activated by a lack of movement or absence of movement through a specific angle (horizontal or vertical). Alarm can also be activated manually via a separate button. Always gives an initial alarm that can be overridden in order to avoid false alarms. Once alarm calls have been processed, there is a signal of 110 dB which allows the person to be located. Works on basis of SIM card. Initial configuration and all settings can be amended via free software downloaded from www.twigcom.com. With GPS location option that can send a Google Maps link via SMS (works best outside buildings). For applications where the victim must be located indoors on the basis of GPS, this device is fitted with the option of SRD which enables communication using beacons that can be supplied separately. Atex version II 2G Ex ib IIC T4 Gb
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW ultra Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,CO and NO2.
Simultaneously monitor and display up to fi ve atmospheric hazards with the GasAlertMicro 5. Adaptable to a variety of applications, the GasAlertMicro 5 has an extensive selection of user-settable fi eld options and is available as either a standard toxic gas model, a PID model for the detection VOCs, or an IR model for CO2 detection. Use the passcode function to prevent unauthorized modifi cations of the instrument ’s settings. Compatible with BW’s MicroDock II automatic test and calibration system, the GasAlertMicro 5 is unparalleled in its versatility, performance and overall value. chemical risks.
Carrying cage to store and transport 4-gas gasdetecting device Gasalertmicroclip and accessories.
Manual pump with 30 cm probe, without filter, gasalert microclip.
The durable GasAlertMax XT provides reliable monitoring of up to four gas hazards and combines simple, one-touch operation in the field with an integrated suction pump. It is ideal for use in enclosed areas. The one-touch controls on this multi-gas detector make it exceptionally easy to use and significantly reduce the time required to train the user. The GasAlertMax XT is fully compatible with MicroDock II, the automated testing and calibration system. It incorporates vibrating and loud audiovisual alarms that continuously show the measured values. It has an integrated pump for remote sampling and is supplied with a 3 metre pump hose, 5 pump filters, a rechargeable battery and charger. It is also equipped with a sturdy clip for attaching it to clothing. It includes a two year guarantee. Sensors can be disabled individually according to requirements. On the standard unit the LEL sensor is set for methane. Please specify if the LEL sensor is to be used for another gas. Version: 02 and LEL. IP class 65 and Atex approved.
The durable GasAlertMax XT provides reliable monitoring of up to four gas hazards and combines simple, one-touch operation in the field with an integrated suction pump. It is ideal for use in enclosed areas. The one-touch controls on this multi-gas detector make it exceptionally easy to use and significantly reduce the time required to train the user. The GasAlertMax XT is fully compatible with MicroDock II, the automated testing and calibration system. It incorporates vibrating and loud audiovisual alarms that continuously show the measured values. It has an integrated pump for remote sampling and is supplied with a 3 metre pump hose, 5 pump filters, a rechargeable battery and charger. It is also equipped with a sturdy clip for attaching it to clothing. It includes a two year guarantee. Sensors can be disabled individually according to requirements. On the standard unit the LEL sensor is set for methane. Please specify if the LEL sensor is to be used for another gas. Version: CO and LEL. IP class 65 and Atex approved. involving chemical risks.
Measuring tube CL2 0.2
Filters to protect sensors of the Gas Alert micro clip. Kit with 5 filters and filterclim to assemble filters on detector.
Measuring tube for Bromo Propane.
