BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Measuring tube to be used in combination with hand pump to measure concentration.
Measuring tube for methan.
Measuring tube for H2S.
Measuring tube for Styrene.
Replacement sensor screens with gasket, kit of 10 pieces for detector GasAlertMax XT.
Measuring tube alcohol A
Simultaneously check and display up to five atmospheric hazards with the GasAlertMicro 5: explosion measurement and 4 toxic gases. PID meter for measuring volatile organic substances. The GasAlertMicro 5 is compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms. Supplied with data logging, rechargeable batteries and charger. Fitted with a built-in pump. Version: LEL, O2, H2S. IP rating 65 and Atex approved.
Testgas H2S 10PPM aluminium cylinder 58L. Only for use in combination with regulator 1014185.
TestgasN2 100% cylinder 34L. Only for use in combination with pressure reducer.
Testgas NH3 25PPM cylinder 34L, calibrated on N2. Only for use in combination with pressure reducer.
Simultaneously check and display up to five atmospheric hazards with the GasAlertMicro 5: explosion measurement and 4 toxic gases. PID meter for measuring volatile organic substances. The GasAlertMicro 5 is compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms. Supplied with data logging, rechargeable batteries and charger. Fitted with a built-in pump. Version: LEL, O2, CO. IP rating 65 and Atex approved.
Testgas H2S 5PPM aluminium cylinder 34L. Only for use in combination with regulator 1014185.
Testgas NH3 50PPM cylinder 58L in air. Only for use in combination with pressure reducer.
Measuring tube to use in combination with ASP-40 pump (1028962) to measure concentration.
The IntelliDoX system combines smart docking modules and Fleet Manager II software to provide automated instrument management for BW Clip4 Series helping you drive productivity, reliability and efficiency. Always with enabler kit (1034592)
Testgas H2S 25PPM aluminium cylinder 34L in N2.
Atex charger including mains charger to Twig Atex USB cable for charging the Twig One atex devices. Attention: Charging in an ATEX zone is not allowed.!!
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2S,CO,HCN.
The GasAlertMicroClipXL is the most compact multi-gas detector for protecting against risks of flammable gas and carbon monoxide. Ideal for use in enclosed areas. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BW's MicroDock II automatic test and calibration system. With vibrating and strong audio-visual alarms that always display the measured values. Compatible with remote sampling pump (accessory). Supplied with rechargeable battery and charger. Equipped with a robust clothing clip. 2-year warranty. Unfilterd LEL sensor is very sensitive for toxications of lead, silicones, phosphorus and phosphates. Sensors must be deactivated separately as required. LEL sensor is set for methane by default (specify if a different gas is applicable for the LEL sensor). Version: CO and LEL. IP rating 65 and Atex approved.
New portable 4-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL,H2,CO.
New portable 5-gas detector designed specifically for sampling and monotoring confined spaces, before and after entry. The BW Ultra has enhanced sensor technology, visibility on gas readings, comfort and connectivity. It complies with all safety regulations in place by detecting your requiered gases. Furthermore, it goes the extra mile by offering you the option to choose a fifth sensor from a list of gases, for added precision at work. BW Ultra is the first gas detector on the market to feature the 1-series sensor, with fast response, reliable performance, and long life, even in extreme working conditions. Tamper-proof operation with one button operation, intuitive LCD icons for quick decision making, easy service and maintenance. Compatible with Honeywell Conected worker, Honeywell TouchConnect Technology for activating a feature, Honeywell SafetySuite for unit configuration and reporting. Quick bump <(>&<)> Calibration with IntelliDoX system. Detects simultaneously O2,LEL (Catalytic unfilterd) ,H2S,CO,NO2.
To charge max devices and/or batteries simultaneously
Adapter to make an existing Intellidox adaptable to the BW Ultra.
Adapter to make an existing Intellidox adaptable to the BW GasAlert Max XTII.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
Keeps the RigRat operational in an atex zone without battery drain.
Black silicone case with neck cord for wearing the E-B10 around the neck.
Simultaneously monitor and display up to five atmospheric hazards with the GasAlertMicro 5. Adaptable to a variety of applications, the GasAlertMicro 5 has an extensive selection of user-settable field options and is available as either a standard toxic gas model, a PID model for the detection VOCs, or an IR model for CO2 detection. Use the passcode function to prevent unauthorized modifications of the instrument settings. Compatible with MicroDock II automatic test and calibration system, the GasAlertMicro 5 is unparalleled in its versatility, performance and overall value. Without motorised sampling pump.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 100h. With infrared (non-dispersive) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Gas detector reusable multigas detects %LEL, H2S, O2 and CO simultaneously. Including batteries and induction charger. Equipped with NFC and a large display that clearly shows information. Correction factors can be set with the free WatchGas SST Range app. The device is robust and is equipped with stable sensors that remain reliable under extreme temperatures and conditions. Can be calibrated every six months. Alarm values low and high: O2 19.5%-23.5%, CO 35-200PPM LEL 10%-20%, H2S 10-15PPM. Alarm settings can be set to the user's preference with the SST Docking Station (1062077) and the free Watchgas app. Equipped with an IR LEL sensor, suitable for inert applications, cannot detect hydrogen and acetylene!
Universal desktop charger for the SST4 series detectors.
Filters to protect sensors of the SST4 Mini.
The SST Dock is an automated test station that allows Bump and Calibration testing and is compatible with the full SST Range in one module. It has the capability to be connected via Wi-Fi, BLE or Cellular and allows for desk, wall and hard case mounted dependent on your application. This kit comes in a hard case and has room for 2 gas bottles and a regulator.
Tool to bump the SST1 detector without using the Watchgas app. Runs on 3 AA batteries (not included).
Tool to put the device to sleep for a maximum of 365 days without using the Watchgas app. Putting the device to sleep can extend its lifespan up to an additional 1 year. Runs on 3 AA batteries (not included).
Filters to protect sensors of the SST1 detectors.
Honeywell BW™ Flex features a large, high-resolution screen on which measurements can be displayed in many different languages. Essential safety information is displayed clearly and effectively, enabling faster decisions to protect lives in hazardous conditions. The BW™ Flex uses i-series intelligent sensors. These sensors monitor sensor status in real time and enable advanced preventive calibration. These sensors also provide maintenance and end-of-life information. These advanced alerts reduce the likelihood of failure and provide you with more information on threats. Battery life of 2 months on a 4.5h charge, compatible with Intellidox. Version with Catalytic unfiltered LEL and O2 H2S/CO and CO2 sensor.
Test cap as a spare part of the SST1, needed to bump test and manually calibrate the device.
Replacement clip including screws for all SST series detectors.
Additional module to extend the multi-charger for SST (1062812) with additional 5 charging slots. One coupling cable (1062815) is required per additional module. (not included).
Coupling cable to extend the mulitcharger (1062812) with an additional module (1062814). A coupling cable is required for each additional module. Up to 4 modules for a total of 20 devices can be placed on top of each other.
Test cap as a spare part of the SST4 Micro, needed to bump test and manually calibrate the device.
Test cap as a spare part of the SST4 Mini, needed to bump test and manually calibrate the device.
External pump for portable gas detectors without built-in pump. To be connected to a hose of max. 15m. Designed for evacuation, measurement, for example in tanks and shafts.
Aluminium bottle of 58L with test gas H2S 10PPM for calibration of Watchgas detectors. To be used for manual calibration or to be combined with the Watchgas docking station SST1/SST4 (1062077). Always to be used with regulator 1062078.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
Replacement battery 3.6V for gas detector serviceable Watchgas SST1
Float to hang at the end of a sampling hose to prevent the hose from ending up in water.
Manual pump with 30 cm probe and filter for gas detectors GasAlert, Icon and Icon+.
Plug for connection USB cable of the HGAS-HTRAM CO2 detector..
CO2 measuring device to monitor indoor air quality. Unique design, look and feel, easy to use. Clear indication of the CO2 concentration on the display. Adjustible visual and acoustic alarm settings. Algorithms that indicate the air quality based on CO2 and type of actifity. Measuring range: 400 to 2000ppm, temperature: -20°C to 60°C, humidity from 0% to 100% RH. Life span at least 36 months, does not require calibration. The HTRAM calibrates itself every 7 days. USB cable for charging is included, plug must be ordered separately 1051636. Standalone device, can not longer be managed or monitored with an app.
