BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Charging station for 1 battery with power.
Gas filter ABE1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
For flow control of compressed air equipments and fan units. Can also be used as a storage bag.
Kit with SR 500 EX fan unit and protective helmet SR 580. Contains, SR 500 EX fan unit, SR 580 protective helmet, battery SR 501 EX, battery charger SR 513 EX, belt SR 508 EX, 2 pcs SR 510 P3 R particle filter, 2 pcs filter adapters, 10 pcs SR 221 pre-filter, 2 pcs pre-filter holder, flow meter, plug kit, cleaning wipe and user manuals. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Antistatic wipes, soaked with non-aggressive liquid, individually wrapped, for daily cleaning of Sundström products.
Complete kit with Speedglas heavy duty welding helmet G5-01, welding filter G5-01/03TW, Adflo particle filter, adflo motor unit and carrying case and consumables.
Wire mesh visor for Commander shot blasting helmet. To be placed between basic glass lens and PC lens for added protection.
Sweat band for air caps, S-133, S-333, S-433 and S-533.
Adaptor to "park" lung demand valve Automaxx AS when not in use. Can be fixed on belt of bretahing apparatus.
Closet for breathing apparatus with one cylinder (up to 6,8l), aparatus can be put in the closet ready for use. For mural fixation. Dimensions: L:89cm,W:49cm,H:35cm. Weight: 5,7kg No PPE.
Fire resistant rescue hood that can be connected to the second terminal of a compressed air device. Once connected to the blower, the victim is supplied with fresh air. Visor treated against fogging. Is stored in a fire retardant and waterproof bag.
Particle-filtering preformed mask with exhalation valve. Additional activated carbon filter against odours, gases and vapours below threshold. Seamless headband and flexible, adjustable nose clip for a comfortable, secure fit. Comfortable sealing lip in nose area for secure fit. Exhalation valve to further reduce breathing resistance, by helping to minimise moisture build up inside the mask. Version : FFP 2 NR D preformed mask with valve and carbon. NPF 10 .EN 149 89/686/EEC
Rechargeable battery for Clean Air motor unit for use with the RJS or PRPS suit.
Pack of 3 high capacity dust filters for the Cleanspace CST Pro or CST Ultra.
Fabric head harness for Cleanspace masks.
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-300E Turbo Unit, M-306 helmet, P filter, filter cover, pre-filters (x10), easy-Clean belt<(><)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Compact and comfortable TPE half mask with pre-assembled and replaceable B1P3 filters. Available in sizes S/M and M/L.
Oxygen producing breathing apparatus with closed stainless steel carrying box with carrying belt. For very hazardous circumstances a nd/or places where a lack of oxygen may develop. Stored in a hermetically sealed, stainless steel carry bag with a strap for carryin g it over the shoulder. Works using an oxygen generating KO2 cell that can be replaced once it is used. KO2 cell is activated by fir st exhalation, responds to moisture and CO2 in exhaled air. Very maintenance-friendly, only requires annual test of seal. Working ti me: at least 90 minutes at consumption of 30 l/min. (escape), 300 minutes at consumption of 10 l/min. (rest). Shelf life: ten years. Weight: 4.9 kg.
Air cooler with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can cool air up to 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose to rubber of PU hood not included. All usable buttons are blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. processes involving chemical risks. NPF: 50 with M-100 and 200 with all other usable air hoods.
The 6-position battery charger organizing stand for Adflo battery chargers provides the ability to charge six batteries at the same time (you still need individual charger per battery). Saving both time and hassle. Compatible with legacy NiMH batteries and the new Li-ion batteries. Flexible installation: either mount on wall or stand-alone.
Individually packed dust mask, class P2, for harmful dust. Form- retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 10.
Anti static rubber hoses offering outstanding aging qualities and longservice life. Resistance to sparks and scorching.CEJN safety couplings that are quickand easy to connect yet prevent accidental disconnection.
Device that is used as a separate compressed air unit or combined with a long-term valve (supplied) to serve as a backup when working on the compressed air network. Including 3S mask and regulator. With emty 2L composite bottle (15 minutes).
Plastic carry bag with belt for protecting full face masks against dust and dirt. Can be worn over the shoulder or around the waist.
Complete set including ergonomic motor unit and welding mask with automatic welding lens, grinding cap and safety helmet. Not for use in closed areas. Set consists of motor unit, battery, charger, air hose, pre-filter, dust filter and welding helmet and transportation bag 790101. Welding helmet with automatically darkening lens 9100XXi (73 x 107 mm), tint adjustable from 5-13. Sensitivity and colouration speed can be adjusted. Battery life: approx. 8 h, when used with dust filters. Flow rate: 170-200 L/min. Weight of motor unit: 1.16 kg, welding helmet: approx. 750 g. NPF: 500.
Insert for prescription glasses for full face mask Promask. No PPE.
Plugs designed for Versaflo hoses BT. These are used to prevent contamination of the hoses when they are stored. Pack of 5 Pieces. No PPE.
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
Hose to connect C40 regulator with hood.
Breathing hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Complete chemical resistant air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Air regulator suitable for working in ATEX environments, mounted on a belt and equipped with flow meter and warning whistle. Regulator provides continuous air flow and serves as a connection between the Sundström air hoods and the compressed air hose.
Assisted fresh air system can be used by 2 operators simultaneously. consisting of an adjustable harness with attachment for the breathing hose (max 20m for 2 operators and 50m for 1 operator) on the shoulder. Easy in use. Comes in a handy box. Mask (1023883) sold separately.
Filter holder including strap to carry the filters of the half mask on the back, making the mask more compact and can be worn, for example, under a face shield.
PVC belt for remote filter holder (1058602).
Protects against organic gases and vapours with a boiling point over 65 °C. For use in combination with full or half face masks with standard threads. . Class 2 gas filter: for max. concentration of 0.5 %.
Disposable protective cover against contamination by splashes and spray mist, for Versaflo TR-300.
Speedglas braces compatible with the Caterpillar Compact Air and Barisoft belt.
Storage box for motorunit kit proflow asbestos: 1058093
Non-rechargeable battery for Clean Air motor unit for use with the RJS suit.
Very light and compact mask. The cartridges are profiled to give a perfect field of vision. Featuring a quick release harness with a djustment points for optimal comfort. The inner half-mask has 2 inhalation valves to prevent fogging. Mask comes with 2 A2P3 filters that can be replaced.
Full-face mask specially designed for the Cleanspace CST system, quick and easy fitting, wide panoramic visor, inner mask made of soft silicone. This mask is NOT suitable for use in ATEX environments.
Light bracket in durable polymer, can be used with a series of wired and wireless mining lamps. Easy to install and adjust for a desired lamp corner. For example, designed that the visor of the M-series air hoods can be lifted without removing the lamp.
Head harness in butyl/NR as a replacement for the FF-600 mask. Clean with a damp cloth and household detergent.
Breathing hose for connection to the motor unit PF-602E
Air heater with neoprene cover on belt for use in combination with 3M airhoods with bayonet coupling. With regulator to adjust the airflow and temperature in the air hood. Can heat air a maximum of 28 °C. For use with compressed air hoses with max. length of 10 m. Brass warning whistle indicates when air flow is potentially too low. Hose in rubber of PU to hood not included. All usable buttons are made blue. Inlet pressure: 4 - 8 bar. Minimum airflow 170 l/min, max. 500 l/min. NPF: 50 with M-100 and 200 with all other hoods.
Protective foil for visor on Shogun full-face mask. Protects the visor against scratches and liquids.
T-Airvisor® with CP visor, airduct and adjustable head harness. Unique low flow indicator. PE breathing hose not included (1035014) For grinding/paintspraying. To be used with T-air motorunit. In line with En 12951:2005 class 3B
Scott full face mask made of high quaulity elastomere. With standard connection for screwfilter EN148. Large anti-damp PC visor. NPF 2000 with motorunit. In line with EN12942
P3 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
Large Cleanspace P3 filter suitable for all Cleanspace PAPR power units. Must be used in conjunction with filter adaptors PAF-0038 or PAF-0078. Weight: 100g.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
Set for performing a personal fit test for dust masks. Set contains test liquid, sprayer and hood. Test person puts on dust mask and hood, then the test liquid is sprayed inside the hood. If the wearer can taste the test liquid, the mask has not been fitted proper ly or the mask does not seal sufficiently for that person. Test can also be performed without hood.
