BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
A2P3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65 °C, plus toxi c dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Leather belt to link the connection hose from the demand valve to the compressed air hose coming from the filter system in order to prevent the mask from being pulled off. Couplers to be ordered separately.
Put togehter with pre filter SR221 on gas, particle, or combined filter. Use also for fit test.
Oxygen-producing self-rescuer with mouthpiece, nose clip and goggles, for very harmful conditions and/or places where there may be a lack of oxygen. Stored in a hermetically sealed container carrying box option to order belt holder loops for carrying on a belt. Operation based on a small compressed air bottle and a technology that converts CO2 into oxygen. With glasses, transportation pouch, overpads. Operating time: 30 to 60 minutes (depending on effort and stress). Shelf life: 15 years.
A2 filter protects against organic gases and vapours. Can be used in combination with the Adflo motor unit. If A2 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation on a single battery is desired. Class 2 gas filter: for max. concentration of 0.5%.
Chin strap as accessory of hoods M-206, M-207, M-306, M-307.
Kit to connect Peltor hearing protection to the Versaflo hoods M-series.
Protects against sulphur dioxide, acidic gasses and vapours. For use in combination with a half or full face mask with standard threads. Class 2 gas filter for maximum concentraiton of 0,5%.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Motor unit Clean Air for suit RJS, including battery, hose, and belt. Filters and battery charger to be ordered separately.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
Full-face mask Basic Plus is the economical version of full-face mask 3S. Mask made of very comfortable, high-quality rubber. Antifo g visor made of acetate, provides wide field of vision (80 %). Speech is conveyed via exhalation valve located just above the filter connection. The headband is easily adjustable, no carry strap for hanging the mask around the neck. Fitted with standard EN 148 thr eaded connection for filters or air hoses with matching coupling.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %. involving chemical risks. Weight: 300g.
REAKTORHGP3 screw-in filter DIN 148 with plastic case. Protects against radioactive iodine, highly toxic particles, and smoke and haze particles. For use with a full-face mask and standard thread. Weight: 307 g.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
The Combined filter SR 599 is intended for use in the SR 500/SR 500 EX fan. The filter is of type A1BE2K1‑Hg-P3 R and provides protection against the following types of gases and vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. Type Hg protects against mercury vapour. Warning. Maximum use time 50 hours. Type P3 R* protects against all types of particulate pollutants, e.g. dust, mist and smoke. *R (Re-useable): The filter is intended to be used for more than a single shift.
Dust mask, class P1, for irritating dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. Protection against organic vapour s < MAC value thanks to active carbon layer. NPF: 4.
Hose to connect Adflo motor unit to air hood. In heavy duty rubber.
xABEK2HGP3 screwfilter DIN 148 in synthetic capsulation. Protects against organic and inorganic gasses, sulphur dioxide, ammonia and high toxic dust-, haze- and smoke particles and mercury vapors. To combine with full mask with standard screw thread. Filter of class 2: until max. concentration of 0,5 %. Weight: 370 gr. Convenient for: processes with chemical risks. In line EN 141.
Compressed air bottle in composite 6.8l/300bar with tap. Content 2040L breathing air. Can be mounted on all compressed air, except the BD mini. Can also be mounted on small compressed air carriage. Weight: 4.2kg. Supplied unfilled and with test certificate. Recertification required every five years. Service life 15 years. Equipped with outflow safeguard.
Set of 3 replacement filters for Aircare filter unit.
Compressed air device that supplies environmentally-independent air and overpressure to the full-face mask. Apparatus for work situations or interventions. Ergonomic basic backplate with shoulder and hip straps with shock absorbing lining and plastic buckles. Includes pressure reducer, pressure gauge, warning whistle to indicate low air, and cylinder connection. Thanks to unique hose technology, 3 functions are combined in 1 hose: pressure gauge, 2 connectors for lung demande valve and whistle signal (single line). To be combined with steel or composite air cylinder 6L(6.8L)/300BAR, regulator M1 and corresponding 3S Maxx or G1 Maxx masks not included. Working time: approx. 45 minutes. NPF: 50 ,000.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the ma sk always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalati on resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted wi th non-adjustable, elastic headbands. NPF: 10.
Hose of strong neoprene that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. Length: 840mm. Not for Atex environments.
Visor protectors for mask TR-82/TR-2002 (BRK 820). Visor protectors made of acetate that protect visor against scratches and spatters.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6100FC.
Compact filter to protect against suspended particles (dusts, mists and fumes), organic and inorganic and acid gases or vapours with a boiling point >65°C, ammonia and organic ammonia derivates. Can be clicked directly into the motor units Cleanspace CST PRO and Ultra.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
Coupling to be installed on leather belt. Fitted with male and female quick-couplings and CEJN closure.
Interior mask with nosepiece valve for full facemask 6800.
Air hood in the form of safety hood with PC visor. Air channel leads to the visor to prevent it from fogging. Can be used in combination with the Sundstörm motorunits SR500/SR700. Visor easy to fold up and air hose is replaceble. For work with a risk of mechanical impact. Weight: 700 g. NPF: 500.
For use together with Sundström compressed air filtration system. Type A protects against oils, organic gases and vapours, such as solvents, with boiling points > +65 °C. Type P3 protects against all types of particulate pollutants, e.g. dust, mist and smoke.
Replacement hood for hood S-657.
Face seal for 9100 AIR hoods.
Cover for TR-600 can be combined with filter TR-6310E.
Radiant heat cover to cover head and shoulders for airhoods M-400. No PPE.
Synthetic wipes, soaked in disinfectant liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
Comfortable half mask in TPE with replaceable ABE1P3filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Sizes: S/M and M/L.
Gas filter ABE1 for use with Sundström face masks , protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic, acidic gasses, vapours and ammonium.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Mask always retains its shape, even when worn for extended periods or after folding the mask. Inside of mask features comfortable PE nose foam for more comfort and better sealing. Exhalation valve for lower exhalation resistance and low levels of CO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands with closure.
REAKTORP3 screw-on filter DIN 148 in aluminium housing. Protects against radioactive iodine, plus highly toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads. Weight: 260g.
Replaceble spare part if the original filter cover is in need of replacement.
Male rectus threaded coupling for equipping V-500, V-100 and V-200 with male coupling.
Lightweight disposable breathing hood with hood made of PU coated polypropylene for less pilling and more durability. Visor made of Polycarbonate. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. Replaces hood HT-121 and HT-125 with article numbers 1002486 and 1002491. Weight: 375g. NPF: 500 when used with Jupiter motor unit. 200 when used with compressed air. Universal size.
Combined filter protecting against gases of the ABEK type, dusts, fumes, mists and some warfare agents: Cyanogen Chloride (CK), Formaldehyde (HCHO), Nitrogen Dioxide (NO2), Phosgene (CG), Phosphine (PH3) and Chloropicrin (PS).
Durable leather belt for TR-600/TR-800
Pack of 3 standard dust filters for the Cleanspace Work.
Half-mask Work size large (including a CleanSpace fabric headband) is designed for use with the CleanSpace WORK Power Unit. Easy to attach to the power unit.
3-ply medical face mask with ear loops, designed to help limit the transmission of infections. The mask consists of an antibacterial outer layer, a meltblown filtration layer and a soft inner layer for enhanced wearer comfort. It offers 98% bacterial filtration efficiency, is splash resistant, hypoallergenic and equipped with a non-metal nose wire for an optimal fit. Tested in accordance with EN 14683:2019 and suitable for healthcare applications. In addition, the masks have a 5-year shelf life from the date of manufacture.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. Sizes: S, M and L. NPF: dep endent on the filter used.
Shot blasting helmet made of polyester fibreglass with wear resistant rubber outer layer that also reduces the impact noise from the reflected shot blasting agent. The wire mesh in front of the visor and the replaceable lenses protect the visor. The Commander helm et provides a concentrated field of vision. Washable cotton neck seal provides additional comfort and safety. Cape made of bisonyl. For connection to compressed air line. Usable for chemical applications due to liquid-proof seams. Includes airflow indicator. Inclu des belt, regulator and hose. Weight: 2500g. Required pressure: between 4 and 10 bar. NPF: 1000.
Turning mechanism for the screen as spare spart of hoods M-106, M-107, M-306, M-307, , M-406, M-407. No PPE.
Dust mask, class P2, for harmful dust and ozon. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with non-adjustable, elastic headbands. Protection against ozon 10 x MAC value thanks to active carbon layer. NPF: 10.
Cleanspace combined filter ABEK1P3 for protection against airborne particulate (dust, mists, and fumes), organic, inorganic gases or vapours, solvents, ammonia and sulphur dioxide (boiling point >65°C). Weight: 270g In line with EN12942
ABEK1P3 filter in plastic housing for 3M Secure Click half face masks. Protects against anorganic and organic gases and vapours with a boiling point > 65°C, sulphur dioxide, acidic gasses and vapours, ammonia, organic ammonia derivates and toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%.
The SR 100 half mask is made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as a filtering device in combination with filters from the Sundström range, or in combination with the SR 307 compressed air attachment which then serves as a breathing apparatus with continuous flow for connection to a compressed air supply. A pre-filter holder is supplied. Best stored in box SR 230 or storage case SR 339. Sizes: S/M, M/L, L/XL.
Charging station for charging 1 to 5 batteries for SR 500, SR 700 and SR 500 EX powered air units. Includes a power strip, 5 charging cables and a mounting kit. Battery/batteries not included.
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Storage or transport bag for adflo motor unit. Only for motor unit, not suitable for storing helmet. No PPE.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
