BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Complete chemical resistant air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
Device for practicing the use of the self-rescuer M40. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer.
Extra mouth piece for trainer selfrescuer M20 devices.
Air regulator suitable for working in ATEX environments, mounted on a belt and equipped with flow meter and warning whistle. Regulator provides continuous air flow and serves as a connection between the Sundström air hoods and the compressed air hose.
P3 filter for 3M half masks Secure Click. Protects against toxic dust, mist and smoke particles, ozone and annoying odor levels (not higher than the legal limit value at work) of organic gases and vapors and acidic gases.
Breathing twin hose tested and approved together with remote filter holder SR905, fan unit SR500/SR700, intended for use with half face mask SR900.
Kit includes: 2 interior and 4 exterior shields, 1 clear spare visor plate, 1 protective breathing tube cover, 2 spare face seals
Standard Lithium-Ion battery for SR700 motor unit, 14,8V 2,25Ah. Battery charging time: 0-80% capacity in 30min, battery autonomy d epending on filter and set air flow: 4-7h.
Sweat band for air caps, S-133, S-333, S-433 and S-533.
Replacement spare part, for use if the original air duct becomes worn out or dammaged during use.
Filter with standard thread connection for filtering nitrogen ash, sulphur dioxide and nitrogen monoxide.
Air regulator with removable and washable strap, with a flow rate of 2 to 9 bar, for use with the Activeair Autoflow suits (1064302) and air cap (1064300). Equipped with a male CEJN coupling and an audible warning signal for low pressure.
Motorgerät zur Kombination mit allen Kopfteilen der S- und M-Serie. Gebläseunterstützte Atemschutzsysteme beseitigen den Atemwiderstand, sind für Bart- und Brillenträger geeignet, Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-600E Turbo Unit, M-306 helmet, A2P filter, filter cover, pre-filters (x10), easy-Clean belt high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used. S uitable for: processes with chemical risks.
Light hood for use with Sundström powered units and compressed air system
Storage or transport bag for Versaflo motor unit.
Replacement battery for motor units PF-602E and PF-602E-ASB
Black compressed air hose, 5 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Black compressed air hose, 10 m, rubber. Extremely robust hose for extreme conditions, hose does not collapse even if a forklift truck is driven over it. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Fitted with male and female RECTUS 96 safety quick-couplings.
Protective foil for visor on Shogun full-face mask. Protects the visor against scratches and liquids.
Escape hood with COP2 filter, provides protection against smoke fromfire, among other things. Easy to put on, even for people who wearglasses. Universal size due to adjustable yellow hood, has cotton neck seal for added safety. Working time: at least 15 minutes. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Delivered in bag to be combined with belt. Hood is vacuum sealed. Shelf life: four years without maintenance, maximum ten years with maintenance.
Communication adaptor for 3S-P mask.
Microporous hood with exhalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator to combine with T-airline regulator kit. To be used for working with motor unit. In line with EN 14594:205 Class 4A
Escape hood filled with breathing air and a constant airflow activated by opening the carrying case. Quick and efficient to use for a maximum escape time of 15 minutes. Suitable for environments where oxygen deficiency may occur.
Large prefilter for Cleanspace motorunits, Ultra and EX. Pack of 20 pieces.
Disposable cover for power untis Cleanspace (standard and large filters), set of 25 pieces.
Dust filter holder for attachment of dust filters secure click series D7900 to 3M secure click gas filters. No PPE.
P3 dust filter from 3M for attachment to 3M secure click gas filters when used with dust filter holder D701. Protects against harmful dust, mist and smoke particles.
P3 dust filter from 3M for direct connection to 3M half face masks secure click. Protects against harmful dust, mist and smoke particles.
Gas filter A1 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C. Can be used in combination with the Sundström half and full face masks.
EX battery charger for the fan unit SR 500 EX. No PPE.
Comfortable half mask in TPE with replaceable A1P3filters . Sizes: S/M and M/L.
Training version of the NH15 Escape Hood is specifically designed for users in an emergency incident. The NH15 is rated for 15 minutes and is available in 3 sizes. It does not require maintenance or fit testing and has a 5 year shelf life.
Motor unit to be combined with all RPB hoods. Motor units eliminate breathing resistance, are suitable for beard and glasses wearers, do not cause allergic reactions and often protect better because there is a leakage from the inside to the outside. This makes them often a good alternative to dust, half and full masks. This motor unit is compact and light (1,150 kg), easy to clean, and can be combined with both dust and/or gas filters. Device equipped with a low flow/battery alarm. Not suitable for use in confined spaces. Includes: motor, easy-clean belt, flow meter, battery and charger, one P-filter and a pack of préfilters. NPF: Depends on hood used.
A2 filter in plastic housing for 3M half face masks Secure Click. Protects against organic gases and vapours with a boiling point >65 °C. Dust filters series 7900 can be mounted on gas filter if dust filter holder D701 is used. Class 2 gas filter: for max. concentration of 0.5%.
Atex Half face mask designed to work to complete the Claenspace EX PAPR systems. Clips quickly onto the power units and are easily unclipped for cleaning. Made of soft silicone that readily moulds to the face and doesn't cause allergic dermatitis.
Gas filter ABE2 protects against orgnaic gases and vapours such as solvents with a boiling point>+65°C, as well as against anorganic and acidic gasses and vapours. To use with half and full face Sundstrom masks.
Fit test adapter for testing the fit of a 3M personal mask. Only suitable for use with bayonet mounted filters.
Complete motor unit kit consisting of SR500 motor unit, SR570 (bump) air hood and passive welding filter SR574 with welding shade 10, standard battery, battery charger SR713, leather belt SR503, protective cover for air hose SR59021, 2 x P3 filters SR510, 10x prefilters SR221, 2 prefilter holder, 2 spark arresters SR336, 2 filter adapters, flow meter, plug kit, and cleaning cloth. NPF: 500. Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h.
Device for practicing the use of the self-rescuer M20.2 with hood. Simulates weight and properties of the real units. Cost-effective solution to quickly train different people in the use of the self-rescuer. Spare mouthpieces sold seperately.
Antistatic and heat resistant compressed air hose with a diameter of 9.5/19mm made of polyester reinforced with EPDM, fitted with safety couplings CEJN 342. For use with the SR99-1 filter unit.
The Sundström SR 200 Airline is a breathing apparatus that is supplied with a continuous flow of air and is designed for connection to a compressed air supply. The unique feature of the SR 200 Airline is the scope it provides for filter back up. The breathing hose can be released from both the facepiece and the control valve. The equipment can then be used as a filtering device. The SR 200 Airline can be used as an alternative to filtering devices in all situations in which the latter are recommended. This applies especially if the user is doing hard or sustained work, and if the pollutants have poor warning properties or are particularly toxic. The SR 200 Airline is made of materials that are not liable to give rise to sparking when subjected to friction, which enables the device to be used in an explosive or fire-hazardous environment. Control valve, flow meter and warning whistle for temporary and continuous monitoring of the air flow are included.
To be installed on Sundström filter system.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve.Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Sealing ring for S-series air caps which permits to attach the connection on the hood.
Hose of lightweight PU that connects between Jupiter or Versaflo motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S- series. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick-connect coupling. PU hose, in combination with explosion-proof battery and Versaflo orJupiter motor unit cover, makes a motor unit suitable for use in Ex zones. Length. Length: 735 mm.
Particle-filtering folding mask with exhalation valve. Additional activated carbon filter against odours, gases and vapours below th reshold. Seamless headband and flexible, adjustable nose clip. Comfortable sealing lip in nose area for secure fit. Exhalation valve to further reduce breathing resistance, by helping to minimise moisture build up inside the mask. Version : FFP2 NR D folding mask with valve and carbon. NPF 10 . EN 149 89/686/EEC
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Wide field of vision due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
AB2P3 screw filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point >65°C, inorganic gases and vapours, toxic dust, mist and smoke particles. To be combined with half or full mask with standard thread. Class 2 filter: up to max concentration of 0.5 %. Weight: 345 gr.
Welding helmet G5-03 PRO AIR in durable, lightweight material. To be combined with Adflo motor unit or V-500 regulator. Supplied without cartridge.
Anti-fog inner protection plate (visor) for welding hoods 9100XX, G5-01 and G5-03. (pak of 5 pieces).
Half mask in TPE with replaceable low profile A2P3 filters. For protection against most organic gases and vapours, dust, metal fumes, mists and micro-organisms. Article replacement filters: 1062247 (SPR670)
Compact filter to protect against suspended particles (dusts, mists and fumes), organic gases or vapours with a boiling point >65°C. Can be clicked directly into the motor units Cleanspace CST PRO and Ultra.
Pac de 10 peel-off visors for Cleanspace masks.
Lightweight drawstring bag designed for convenience. Featuring two drawstrings attached to the bottom corners, it can be comfortably carried over the shoulder or as a backpack.
Combination of safety helmet G3001, air duct S-960 to be attached to the helmet and chemical resistant hood with shoulder cover S-805E. Can be combined with Versaflo air hose and Versaflo motor units, or V-500E for working on compressed air. This combination is extremely suitable when respiratory protection needs to be combined with a safety helmet.
Compensation per trainer who comes on-site for a 3M training.
Chinstrap for the airhood with integrated safety helmet SR580 (1039722).
Output for 2 persons / compressed air hoses to be installed on Aircare filter system.
Carrying harness consisting of two shoulder straps and one hip belt to comfortably carry SSR30/100 B on the body in both the unopene d and opened position.
Changeover valve or automatic changeover valve for work that requires use of compressed air for breathing and where an interruption of the air supply could be life threatening. Changeover valve with one connection for air hose from compressed air line and one conn ection for air hose from compressed air apparatus. Primary source is the compressed air line and secondary source is the compressed air apparatus that functions as a backup if the supply from the air line is cut off. When the device is switched from the primary to the secondary source, a whistle sounds. For use with BD Mini, DB 96 and Airmaxx compressed air systems.
Head harness as spare spart of hoods M-106, M-107. No PPE.
