BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Hood with air duct S-960 that is placed on the supplied safety helmet G3000 and over which the hood S-707 pulls. Can be combined with the Versaflo motor units. Breathing hose and motor unit can be ordered separately.
Versaflo air duct to be mounted on the 3M helmet G3000, and to be combined with hoses BT-20/BT-30/BT40, a Versalfo motor unit and one of the hoods S605/S-607/S-707, thus creating a complete head, respiratory and eye protection.
Complete kit with Speedglas heavy duty welding helmet G5-03 PRO AIR, adflo motor unit and carrying bag, without welding filter.
Comfortable combination safety goggle and half mask in TPE with replaceable low profile ABEK1P3 filters. For protection against most organic and arorganic gases and vapours, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivates, toxic dust, vapour and smoke particles metal fumes, mists and micro-organisms. Replacement filter: 1061777
Costs for a hotel stay if the trainer has to travel a long distance for an on-site training.
Neck support size small as a replacement part for Cleanspace Work.
Neck support size medium as a replacement part for Cleanspace Work.
Disposable and antistatic Chemprotex 300 chemical-resistant compressed air hood with a reusable and removable air system. It offers the highest level of protection against chemical particles and liquids. Designed to be worn over protective overalls. 10 year shelf life, airflow 210-400 ltr/min.
Air regulator with removable and washable strap, with a flow rate of 2 to 9 bar, for use with the Activeair Autoflow suits (1064302) and air cap (1064300). Equipped with a male CEJN coupling and an audible warning signal for low pressure.
Replacement shell for the welding helmet (outer helmet) G5-01, flip-up.
Escape hood with unfilled composite compressed air cylinder with constant airflow activated by opening the carrying bag. Quick and e fficient to use for a maximum escape time of 15 min. Suitable for environments where oxygen deficiency may occur.
SR500 motorunit with PVC belt drive to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, easy to clean PVC belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
Head assembly harness for Sundstrom masks SR 200. No PPE.
scratch-resistant PC replacement visor for full mask SR200
This ready-to-use kit includes a PF2-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
SR 570 hood for use with the SR 500 / SR 500 EX or SR 700 powered air-purifying unit, and with the SR 507 for compressed air applications. Transparent TAC (triacetate) visor. The airflow channel directs air over the visor to prevent fogging. NPF: 500 when used in combination with a powered unit. Suitable for grinding, light-duty work, and spray painting. Complies with EN 12941.
Light hood for use with Sundström powered units and compressed air system
Replacement hood for SR 603 hood
Discreet nose plug that helps reduce unpleasant odors with a fresh menthol scent while allowing normal breathing. Ideal for improving user comfort in environments with disturbing smells. This product is NOT respiratory protective equipment . It is intended solely for odor control and user comfort.
Face seal speedglass 9100 air.
EVOH film barrier hood with exalation valve, PETG visor, air duct and adjustable head harness. Unique low flow indicator.PE breating hose. For high hazard applications. Combined with T-airline regulator kit. To be used with compressed air systems.NPF 2000. In line with EN 14594:2005 Class 3B/4A
Removable window for T-Airvisor hood.
Ergonomically shaped with clear full colour LED display. Uses 3 standard thread filters (only approved with RSG filters); autonomy to max. 8 hours. With visual vibration and audible alarm for low flow or saturation of dust filter. Air flow can be set. IP65 approved for decontamination under the shower. To be combined with all air hoods from the T-air series with hose 1035014, or with full face mask 500E together with hose 1046652. NPF: depends on the mask used.
Spare head harness for cleanspace Respirator (PAF-0034)
A1P3 filter in plastic housing for 3M half and full face masks. Protects against organic vapours and gaz with boiling point >65°C , toxic dust, vapour and smoke particles.
The Battery charger for all cleanspace models has interchangeable plugs for use in different countries.
Blue compressed air hose, 30 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Foldable mask, class P1, for irritating dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fit ted with non-adjustable, elastic headbands. Masks packaged separately. NPF: 4.
Dust mask, class P1, for irritating dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the mask always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhal ation resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with non-adjustable, elastic headbands. NPF: 4.
ABEK2HGP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the ma sk always retains its shape, even when worn for extended periods or after folding the mask. Fitted with non-adjustable, elastic head bands. NPF: 10.
