BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Low shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
Low shoe in Putek® PLUS (68% recycled polyester), with a non metallic antiperforation sole (50% recycled polyester) and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF BioMass Balance (100% renewable sources), SRC antislip, oil and carburant resistant. Removable perforated insole Maxi-Soft Duo Green composed of a layer of PU Dynamic from BASF® with thermosensitive shape memory and a layer of BASF® BioMass Balance Elastopan, this improves weight distribution, reduces pressure points and absorbs and relieves stress on the body when standing for long periods and walks. 100% metalfree. Sizes: 35-48.
Powerful rechargeable LED head and flashlight, with a maximum output of 2700 lumens, making them extremely suitable for use in industry. the lamp can also be used hands-free, by means of a metal pocket clip. There is also a built-in magnet on the back to secure them to a metal surface. The lamp can be rotated 180° to easily set the desired angle. Easy to operate, even with gloves. Comes with micro USB cable to charge the 21700 Li-Ion battery at 4000 mAh, battery holder, lamp holder, headband, spare O-ring, pocket clip and a lanyard. Can also be charged with 2 CR123A batteries.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 3 dark shade number levels and 3 user selectable levels of detector sensitivity.
High quality dispenser with cleaning tissues, microfibre (B401) and cleaning spray (B402).
High shoe in black textile composed of high tenacity polyamide with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in Gore-Tex. Sole in EVA/VIBRAM. Sizes: 35-50.
Cut and heat resistant sanitized work glove compatible with touch screens
The new lightweight uvex pheos planet safety helmet is made of 30% biobased material and retains its shape even under lateral pressure – and meets the safety requirements in the construction and industrial sector. 6-point textile harness with rotary knob, the headband is made from 50% recycled helmet shells. Thanks to the efficient accessory system, the helmet can be quickly and easily adapted to individual needs, such as attaching uvex pheos earmuffs, helmet-mounted lamp or visor. Head circumference : 52-61 cm. PCF (Product Carbon Footprint) = 2 ,0kg CO².
Helmet adapter for the uvex pheos visor - magnetic and K2P earmuff. Combination with uvex pheos and uvex alpine helmets. No PPE.
Exterior: Stand-up collar, concealed snap button closure under facing 2 patch chest pockets with flaps with hidden press studs, 2 patch side pockets with flaps with hidden press studs, 2 loops for gas detectors, round sleeves, sleeve narrowing by means of a button. press studs, flame retardant reflective tape (50 mm). Inside: 1 inner pocket, identification label. Material: Sio-Safe Essential Eco: 50% cotton + 30% Tencel = 19% recycled polyester + 1% AST. +- 320 g/m. Complies with: EN 61482-2 ELIM 9.7 cal/cm² - ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 11611 Class 1 A1 A2, EN 1149-5, EN 13034 (Type PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 44 - 64
Cut-resistant glove in special graphene fibers with HCT® Nitril Nano-foam palm coating. These fibers provide heat regulation and keep hands comfortable. Without glass and steel fibers. Touchscreen compatible.
ZOLL AED Plus, Type 123 lithium batteries, 10 pieces with storage sleeve. Suitable for the Zoll AED Plus semi-automatic (1060426) or the Zoll AED Plus fully automatic (1060427).
Comfortable and lightweight plastic safety glasses with trendy temple design and soft nose bridge.
Terylene suspension with ratchet for safety helmet Roofer.
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
Dust mask, class P2, for irritating dust. Mask without nose bridge vut whit seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with adjustable, elastic headbands. NPF: 10.
Soft cotton spare sweatband for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 3-piece packaging. No PPE.
The safety shoe features a fibreglass toe cap and a flexible FAP® midsole. In addition, the shoe offers TPU protection in the heel and toe area, is metal-free and ESD-safe. The upper consists of durable microfibre with breathable Sandwich Mesh, while the lining is made of BreathActive functional lining. The footbed features evercushion® technology. The sole of the shoe, the MOTION PWR, is heat-resistant up to 300°C and has a slip-resistant rubber outsole with a PWR.FOAM midsole for excellent cushioning, energy return and stability.
Tripod with tubular aluminium legs for lowest possible weight. Four eye bolts in the head that can be used as anchor points. Tripod is adjustable from 1.35 to 2.35 metres. Tripod is meant for two people, with a total weight of 500 kg. To be used in combination with winch and rescue set Rollgliss or SRL Weight 14.5 kg. Without carrying bag: 1003772.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Long johns / Thermal / Seamless / Outside: Front fl y / Ribbed ankles for extra comfort /Fabric: SIO-FIT® Thermal wear:50% Viloft® - 50% polyester(interlock); ± 210 g/m² Colour: BS0 navy
Fall-prevention device, 1.5 metre webbing strap, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movement almost immediately. Serves as connection between anchor point and harness. Only for vertical use.
Disinfectant fluid for responsible cleaning of rubber masks, medical equipment and plastic or metal parts. Disinfect for 15 minutes with a 1% solution of this product. Desinfecto kills bacteria and mildew, deactivates viruses, is non-flammable and biodegradable. B ottle containing 1 litres, pH value 6.7.
Frost-free emergency shower and eyewash fountain, with stainless steel pull handle and UV resistant ABS coating. Works to -50 °C wit h a self-regulating heating cable.
Small, multifunctional bin for quick and efficient response to leaks or maintenance projects, anywhere in the factory. The spill kit includes a handy inner panel with well organised, clearly legible leakage guidelines. Absorption capacity: 59 litres. Content: 1 roll with double perforation (38 x 22 cm), 1 sock (7.6 x 244 cm), 2 socks (7.6 x 122 cm), 6 pillows (23 x 23 cm), 1 pair of gloves, 1 pair of safety glasses, 1 emergency response handbook and 2 disposal bags. The absorption material in the spill kit is of UN quality.
Sign according GHS normation in self adhesive polyester: health risk. Size: 100x100mm. 4 labels per card. No PPE.
Long wearing comfort with reusable and detectable earplugs. Made from high quality material which uses the heat of the body to mould to the shape of the ear canal. SmartFit detectable earplugs are equipped with a metallic cord to prevent loss. The blue colour also adds visibility to avoid pollution in the food sector. Available in: blue.
Adsorbs all industrial liquids including oils, water, solvents and coolants. GP roles have a better and less fluffy finish compared to traditional one-layer melt spinning reels. Role Dimensions: 96 x 44m. Recording capacity: 192 liters. Package: 1 roll / bag. Ideal for covering larger areas. No PPE.
Drench shower for vertical installation shall include a green ABS plastic 270mm diameter showerhead with integral self-regulating 76l/min flow control, chrome-plated brass stay-open ball valve equipped with a stainless steel ball and stem. Stainless steel pull rod with triangular handle. Pictogram SP177 included
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE. not damaged by scuffing from pallets. Available in different colours and sizes. Not PPE.
Brown, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Suitable for light or medium mechanical work and laboratory applications.
Composite natural latex gloves with dielectric properties coated with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 3: operating voltage 26,500V, test voltage 30,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Available in sizes 8-11.
High shoe in full grain leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Laces are heat resistant. Has BIOMEX-PROTECTION- support for stabilizing the ankle. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
Front cover kit for welding helmets 9100FX, 9100 FX-air and 9100MP.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore- Tex. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Pull straps in leather Sizes: 38-48.
Low shoe Helium in water repellent ECOLORICA with non-metallic toecap and anti-perforation sole. Inner lining in textile, anatomically shaped foot-bed. Outsole: PU/TPU. Sizes: 36-47.
Antistatic clog autoclave Studium, very suitable for surgery and aseptic places. With antislip SRC, antistatic ESD and shock absorption in the heel. Adjustable heel strap. Autoclavable up to 134°C. Available in different colours and double sizes. Sizes: 35/36 - 41/42.
Standard Adjustable footrest Height is adjustable to two positions - Thanks to the 'floating' elevation, you can stretch your legs, stimulating blood circulation - The roughened surface massages the soles of the feet for stress reduction
This is the first Box Cutter in the world with a ceramic knife. The special shape of the handle protects your hand from injury. Opening boxes is fast and safe. The blade can be put into 3 positions quickly and easily for a longer/shorter blade. • Includes a double sided ceramic knife. • Remains sharp 10x longer than a steel blade. • Blade is fully extendible and adjustable. • Easy blade placement. • Reserve blades available. In packs of 4 (1027188). For left and right handers
Firefighter jacket Tiger Plus Elite with NOMEX® COMFORT GRID, 200 gr / m², SOFIDRY: ▪ High in 1 piece upright closing collar with wide closure. ▪ Shoulder pads with internal 3D thermal reinforcements and external silicone coated Kevlar® reinforcements. ▪ YKK anti-panic crystal closure with a waterproof flap and velcro closure. ▪ Pockets: o Radio pocket and 1 flashlight holder. o Napoleon pocket + pen holder in the side of the jacket. o 2 patched outer pockets with slanted flap with flap. o Equipped with D-rings for glove attachment. o Knitted aramid cuffs. o Various microphone loops. o All pockets with pull loops. ▪ Pre-formed 3D sleeves with insert. ▪ Unique protectors on the pressure points made in 3D and with RHTI24> 40sec! ▪ Equipped with external elbow protection and reinforced sleeve ends. ▪ The underside of the jacket is provided with an anti-absorbent layer for perfect watertightness. ▪ Extended back for better protection.
Used to secure Python Safety D-rings to apparatus to create an attachment point. Adapts to the shape of the material around which it is wound. Does not leave behind any glue or residue. Width: 2,54cm, lenght: 2,74m Not PPE.
Refills with Salvequick, blue detectable plasters. Each refill contains 30 sterile plasters (15 plasters measuring 66 x 39 (22) mm and 15 plasters measuring 72 x 19 mm).
Self-adhesive waterproof high-visibility tag with personal info. Statement: In Case or Emergency. You stick this ticket on your helmet after you have entered all of your important personal information. This would include your name, address, companies who should be contacted in the event of an accident. It could also include any allergies, diseases such as diabetes etc. In short, anything that could be of interest to the first responders in order to identify you.
Inox scissors (15cm) for cutting fabric or paper. Does not cut in skin.
High quality filter system that converts compressed air to breathing air in line with the European standards. Must always be installed between compressed air source and user of compressed air hood or mask. Includes two filters: AK filter for odours and taste and SMF filter to separate oil, water and dust. Pressure reducer with gauge eliminates any pressure fluctuations from the compressed air line. Regulator allows you to adjust average pressure to the hood or mask you are using. Can supply breathing air for up to three people. Weight is approx. 2.6 kg. Capacity: output is adjustable between 0 and 10 bar. Input pressure min. and max. between 4 (1 user) and 10 bar (3 users) Model on base. Can be ordered with 3-way output 1002713 and 1014794 couplers. For use with compressed air hoses with maximum lenght of 10m.
Pack of sterile gauze compresses with dimensions 10X10cm. Air-permeable, soft non-woven material, absorbent, suitable for many wounds and can also be used to clean wounds.
3M™ Solus™ 1000 is an adjustable safety spectacle. It has a Scotchgard anti-fog layer which protects longer than a normal anti-fog layer. Marking: 5C-3.1 1 FT KN.
The 3M™ Goggle Gear, 500-Series is a low-profile design with an adjustable strap and indirect ventilation. These splash goggles with 3M™ Scotchgard™ Anti-Fog Coating help keep lenses clear in, steamy and wet environments.
Plaster with a detectable strip under the cushioning. Suitable for food industry or anyone who comes into contact with food. The plasters are blue and are easy to spot. Dimensions 18cmx2cm.
The 3M™ DBI-SALA® Utility Belt XL/3XL (102-137cm) is compatible with all 3M™ DBI-SALA® belt holsters and tool pouches. Padding inside two layers of Cordura provide for durability and comfort. No PPE.
Arm protector heat and cut resistant. Length 45 cm.
Full face mask in TPE with visor in polycarbonate anti fog, with filter connection EN148.NPF depends on used filter, 2000 with motorunit T-Air. When used with motorunit, the hose 1046652 needs to be ordered separately In line with EN136-2; EN12942
Cap with 5 panel in 100% cotton. Seamless front panel, Eyelets, peak with six rows of stitching, RipStrip size adjuster, perfect for printing or embroidery. Available colours: white, black, graphite grey, light grey, navy, royalblue, yellow, orange. No PPE.
Long sleeved poloshirt in 50% coton/50% polyester (180g/m²). Durable and strong, neck tape, 3-buttons, cuffs at the end of the sleeves, straight model with side splits. Available colours: red, black, white, grey, navy and royalblue. Available sizes: XS-7XL.
Safety helmet with integrated eye protection made of ABS with badge holder. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
Elbow and forearm protection which gives users close to 100% covering of the forearm. With anti-slip band on the inside to ensure that the protection stays in position.
J-Energy series. High shoe in velours, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Ballistic safety glasses with flexible, adjustable anti-slip arms and adjustable anti-slip nose-bridge. Grey polycarbonate lenses with an anti-scratch coating.
Detectable beard mask in polypropylene with metal strip. Perfect for use in food or agro industry. Available colour: blue.
Arm protector, polyethylene, thickness 20 microns, length 40cm. Pack of 100. Available in: blue, white, red, green and yellow.
Welding and heat-resistant glove, Fully lined, 0,8-0,9 mm, Full grain goatskin, Full grain goatskin, Cut resistance level 4, KEVLAR® fiber, Nomex®, Cat. III, Brown, black, Extra long, Reinforced seams, Water and oil repellent, Elasticated 180°, for allround work. EN 388:2003, 3422 EN 407:2004, 41234X
Sporty lightweight (34 gr) goggles with grey polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With textile headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
