BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Low safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Glove with extremely smooth and efficient carrier nitrile foam coating. Glove gives very pleasant feeling and thus provides increased comfort. Excellent grip in wet or oily conditions thanks to the foam nitrile coating. Conform: EN388: 4.1.3.1.X, EN 407 X.1.X.X.X.
Dark blue disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 4.6 g / Thickness: 3.5 mil, 0.09.-0,12mm). Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact for 2 hours at 40°C (10/2011). Available sizes: S-XXL.
Fully seamless, grey, knit gloves with grey PU coating on a white HPPE / Lycra liner. Available in: grey/white. Sizes: 7/ 8 / 9 / 10 / 11 / 12.
Fully seamless, grey, knit gloves withgreyPU coating on a white Dyneema® liner. Available in: grey/white. Sizes: 8 / 9 / 10 / 11 / 12.
High safety shoe in microfibre with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
knitted cut resistant glove (8cm cuff) with a foam nitrile coating. The support consists of high-cut resistant fibers, nylon and spandex. The nitrile coating (on the palm) provides an excellent grip on dry, but also on wet surfaces and beoliede. Very comfortable and excellent protection against abrasion. Protection against contact heat up to 100°C. Application: glass, metal assembly, injection molding of plastics. Available sizes: 7-12. Conform: EN 388 4.X.4.2.C and EN 407:X.1.X.X.X.X.
High shoe S2 in microfibre with 200J synthetic toe cap. Lining in breathable synthetic material (mesh),suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35-52.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: grey, white. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Boot in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in wool. Outsole in PU/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 37-48.
Sturdy glove made of 100% nitrile with rolled cuff. Completely powder-free and free of natural rubber, wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Very flexible and seamlessly knitted glove with a black nitrile foam coating. Nylon/spandex liner and thin nitril coating give improved ventilation and comfort and very steady and dry grip in humid and oily conditions.
Seamless glove in nylon / polyester with polyurethane coating on the palm.Good wearing comfort because of large breathing ability, a perfect fit and optimal sensitivity. Suitable for packaging industry, assembly,electronics, inspection, painting. Sizes: 7-11.
Disposable coverall in polypropylene SMS with hood and two-way zip with zip flap. Model for general purpose applications. Three-thread overlocked seams and elastic hood, waist, ankles and wrists. Available in white and blue. Type 5-6.
High-cut safety shoe S3 in leather with a steel safety toecap and antiperforation midsole, scuffcap. Cambrelle lining and synthetic PU tongue. Padded ankle protection, gusseted closure. PU/PU walking sole: suple and lightweight, oil resistant. Sizes: 35-48.
Cut resistant, completely seamless grey knit gloves with grey PU coating. Excellent tactility combined with highest level of cut protection. Sizes: 7/8/9/10/11. Suitable or: circumstances in which a good grip and cut, abrasion or puncture resistance are required, such as packaging, installation, assembly, automotive industry, glass and paper industry.
Shirt, 50% Viloft 50% polyester, thermal, long sleeves, crew neck. Sizes: S - XXL.
High shoe Renzo GTX S3 CI in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/PU, resistant to fats and oils. With water resistant and breathable Goretex membrane. Fitted with a half scuffcap.
High shoe S3 in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35-52.
Hi-Vis body, 100% polyester mesh, velcro closure, reflective tape around waist, reflective tape over each shoulder. Available in: fluo yellow, fluo orange.
Grey metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. The side protection in clear polycarbonate and riveted.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
J-Energy series. High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU (Infinergy ), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48. S uitable for: general industrial applications.
Low shoe S3 in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35-52.
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Cut resistant glove without seams with silicon-free PU coating. Wrist and forearm protection thanks to a long 15 cm cuff. The coating gives a very good grip in work requiring good dexterity in dry conditions. The glove liner is a combination of HPPE, fiberglass and nylon, and has, due to very dens knitting, a very high cut resistance. Usage: Situations where adhesion, cut resistance, tear and perforation are required, such as packaging, assembly, the automotive industry, the glass and paper industry.
High shoe S3 in waterresistant black full grain leather with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35-52.
The lightest and most comfortable cut resistant glove (18 gauge) thanks to the use of Dyneema Diamond Technology. A perfect synergy of high sensitivity, cut resistance and comfort. This glove has an excellent performing thin nitrile foam coating (without silicones) with an exceptionnal grip on oiled or slippery surfaces and gives contact heat protection upto 100°C. Thanks to its light weight and the Dyneema® Diamond fibre, your hands stay well ventilated and get a "cool" grip. No use of glass fibre or any other external cut resistant fibres so the cut resistant properties remain intact. Ideal for use in applications such as assembly of thin parts or montage. Available sizes: 7-11.
Parka, hi-viz, 100% polyester, zip closure under flap with press studs, hood in collar, fleece in collar, mobile pocket with flap and velcro, ID holder with velcro closure, 2 patched pockets with flaps and velcro, 2 horizontal reflective bands, 1 vertical band on each shoulder, drawstring in waist, inside pocket with zip closure, napoleon pocket, pen holder. Removable vest, detachable sleeves, body with 2 pockets, ID holder with velcro, mobile pocket with flap and velcro, 2 inside pockets, 2 horizontal reflective bands, 1 vertical reflective band over each shoulder. The vest can also be worn separately with the signal section to the outside or inside.
Low shoe S2 in microfibre with 200J synthetic toe cap. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. ESD approved. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35-52.
Gloves made of sturdy, top-quality cowgrain leather. Driver Vachette has a perfect fit, reinforced seams along the fingers and high tactility.
Ultra-thin glove in 100% nylon with a Polyurethane (PU) coating. The 18 gauge carrier offers incredible comfort, finger sensitivity and feels like a second skin. The PU coating is silicone free and does not create contamination on painted objects. Lightweight so hands are well ventilated. Very abrasion resistant coating. Ideal for applications in dry conditions, such as light assembly, precision tasks, light logistic activities. Due to its full black colour, this glove is ideal for contaminated environments. Available sizes: 6-11.
Low shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Coverall, Tyvek®, breathable, antistatic, limited chemical resistant to water-based products, does not pill, stitched seams at outside, new improved hood with elastic, elastic at wrists (new design) and ankles, zip closure under flap.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Safety glasses in blank Polycarbonate. Sturdy, protective, stylish, comfortable and leightweight model (21g). Foreseen of a an adjustable nose bridge and TIPGGRIP temples, which fits perfectly all faces thanks to its shape-memory material. With Platinum coating: This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging.
Signa waistcoat, mobile pocket, ID and pen pockets, two hip pockets with flap and comfortable zipper closure, key ring.
Sturdy glove made of nitrile and neoprene with rolled cuff. Powder and silicone free with special inner layer for fast and smooth donning. Chemical disposable glove.
Dark gray metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. The side protection in clear polycarbonate and riveted. Separate matching pouch available.
Antistatic nylon gloves (24 cm) with foamy insulating layer nitrile on the palm. KnitzonzTM technology increases flexibility and comfort in congested areas, which means less fatigue. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Latex and silicone free. Sizes: 6-11.
Glove with very high cut protection, suitable for handling very sharp parts in the glass and metal industry.
High-cut, sporty, brown/black safety shoe in full grain leather with steel toecap and steel antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non-slip, resistant to oil, petrol and acid, high shock absorbency. Leather insole and padded tongue. Sizes: D (35- 49), XD (37-49).
Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model wi thstitched and taped seams, two times zipper under flap, with hood andelastic at the wrists and ankles, reinforcement at the knees. Suitablefor: chemical and petrochemical industries, pharmaceutical industry, waste collection and processing, tank cleaning, emergency response services, all activities involving risk of contamination with less aggressive chemicals. Sizes: S - XXXL.
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (18 gauge) with insulating layer nitrile foam/aqua PU in the palm, with extra coating between thumb and forefinger.Heat resistant up to 100°C contact heat. Sizes: 6-11.
J-Energy series. Low shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
T-shirt, 100% pre-shrunk ring spun cotton, 185 gr./m², single jersey, short sleeves, round collar. Available in: white, black, navy, red, natural, sand, chocolate, gold, apricot, orange, sunset orange, sorbet, burgundy, sky blue, swimming pool, royal blue, stone blue, indigo, kelly green, bottle green, moss green, khaki, gray ash, sport gray, dark gray, used gold, black used.
Winter knitted polyamide glove in black colour. Complete coating in nitrile foam. Hand palm with nitrile dots. Foodapproved.Length 26 cm. Sizes: 7 - 11.
Flock-lined nitrile gloves with sandpatch finish for a good grip and tactility when handling wet objects. Good protection against all commonly used solvents and resistant to abrasion.
Blue safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Comfortable nose bridge. Integrated side, bottom and top protection with indirect ventilation.
Low shoe S3 in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35- 52.
Thermo T-shirt long sleeves in 50% polyester / 50% cotton. Available sizes: XS-5XL. Available colours: Navy (XS-5XL), White (XS-3XL), Lightblue, Black (S-3XL).
Leather glove with cotton back and reinforced seams. Good fit and dexterity. Basic quality. Sizes: 7-12.
Long john, 50% Viloft 50% polyester, thermal, fly, long pipes. Suitable for: working in cold environment. Sizes: S - XXL. No PPE.
Low shoe S1P in microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35-52.
Glove with extremely flexible and thin liner in stretch material with high-performance nitrile foam coating. Glove gives a very soft, cool and pleasant feeling and ensures breathability (sweat is quickly drained) for excellent wearing comfort. All materials of the glove are Oeko-Tex certified. 15 gauge Glycose / Glycerol sustainable liner Production of this liner reduces the CO2 emission with 67% compared to standard nylon. Solid grip in dry and oily circumstances. Touch-screen functionality. Protection against a short contact heat of 100 ° C. Available sizes: 7-11. Conforms to: EN 388: 2016: 4.1.2.1.X and EN 407 X.1.X.X.X.X.
Full grain leather boot with a perforated protective toecap made of polymer and Flextane antiperforation midsole. Fitted with two pull loops on the boot for easy donning. Isothermic lined version. The Softane two- component sole with lugs provides better protection against slipping and is not affected by contact with oils and hydrocarbons. The shoe provides good shock absorption. Sizes: 35-48.
Low shoe Sivori S1P in suede with Breatex details, with 200J aluminium toecap and non-metallic anti-perforation sole. Leg in Breatex and Microfibre. Sole in PU / TPU and Sanydry lining. Insole in soft material with a comfort layer and an absorbent layer. Sizes: 36-47.
The lightest and most comfortable cut resistant glove thanks to the Dyneema® Diamond fibre and technology. A quality combination of high sensitivity, cut resistance and comfort. The Dynablade PU Light has a polyurethane (PU) coating which gives you exceptionnal grip. Thanks to the special Dyneema® fibre your hands are kept cool and ventilated. A no use of glassfibre guarantees a longer duration of its cut resistant properties. If you work in applications such as assembly, packaging or logistics, this glove is a must have. Available sizes: 7- 11.
Eye wash bottle with neutralising solution (DIPHOTERINE®) for immediate eye rinsing when chemicals have spattered into the face. Content: 50 ml. Shelf life two years, one-time use. Optionally available: leather holder for belt attachment.
Safety boot in PU with steel toe cap, steel midsole, oil-resistant outsole, antistatic, energy-absorbing, thermal insulation. Purofort boots are warm in the winter and cool in the summer. Isolate to -20°C. The shock-absorbing effect prevents fatigue. Perfected fit with innovative Snug-fit design to prevent heel slipping. Purofort® boots have a good grip and are 100% waterproof. Sizes: 35-48. Fit for: outdoor work.
Sturdy glove made of 100% nitrile with rolled cuff. Lightly powdered and completely free of natural rubber proteins. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Bicolor Blouson in 100% polyester with PU coating, zip-off sleeves, zip- out teddy liningandremovable collar so it can be converted to a high- visibility vest,retroreflective striping, zip closure under flap with press studs.
Low shoe in microfiber, with a steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Flame retardant and anti-static fleece. Quality: 60% modacrylic, 38% cotton, 2% AST, 280 gr / m². Available sizes: S-4XL. Available colors: Royal blue and navy. Complies with: EN ISO 14116 index 3, EN ISO 11612 A1.B1.C1., EN 1149-5.
ABS safety helmet with flip-down, panoramic safety glasses with polycarbonate lenses. Can be worn with corrective glasses. Size: 49-63 cm, adjustable with a ratchet. Available in: white, yellow, blue, red, green.
Safety glasses A800 with wide field of vision and lenses in blank polycarbonate, treated with an anti-vapour coating. With a soft no se-bridge with anti-slip effect.
Low shoe S3 in full grain leather with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Sweater made of 50% cotton/50% polyester - 280 g/m2. Crew neck collar. Elastic in collar, waist and sleeve cuffs. Colour: Royal blue, white, black, navy, red, dark green, dark grey, ash grey, burundy. No PPE. 5XL.
Low mocassin in white waterresistent synthetic material, fitted with a Air Toe composite toecap (perforated) and non metallic antiperforation midsole Safe & Flex Zero+. Outsole in PU, extreem antislip, lightweight, oilresistant and antistatic. Energyabsorbing heelpart. Liner in 3D material, with moisture regulating celstructure. Removable and ergonomical insole in polyethylene/EVA with textile layer for a beter comfort. Big size range. This shoe has an extreme slip resistance and washable shaft for several activities. 100% metalfree. Sizes: 35-48.
