BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Work trousers with hidden zipper, 2 inset side pockets, 2 back pockets with flap, ruler pocket with flap, thigh pocket with flap, knee pockets, extra insertion at the crotch to prevent tearing, reflection band. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin binding + DWR, 280 gr / m2. Available sizes: 44-66, lengths 14-57 and belly sizes 24-29. Available colors: Black / gray, corn blue / navy, gray / red and gray / blue.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
T-shirt, 100% pre-shrunk ring spun cotton, 185 gr./m², single jersey ,long sleeves,round collar, cuffs and the bottom straight. Available in: navy blue, white, black, sand, deep red, royal blue, kakhi, sport gray, using gold, used orange, used wasabi.
Safety knife with laminated single blade, sturdy and functional For cutting double cardboard, paper, foil and straps. The single-sided blade can easily be reversed and replaced. Replacement blade always available in holster. Replacement blades: 1025552.
Low shoe entry model in black microfibre with plastic 200J toecap. Lining in breathable and antibacterial textile. Sole in PU / PU.
Low shoe in waterrepellent black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D mesh. Outsole in PU/PU BASF, SRC antislip, oil and carburant resistant. Removable, perforated insole with PU and Elastopan layer for reducing pressure points and stress, while standing and running for a long time . 100% metalfree. Sizes: 35-48.
High shoe recyclable in black full grain leather with steel toecap and antiperforation mid-sole. Sole in PU/PU, resistant to oil and fat, and insole in sanitized leather. Width: D (35-49) and XD (37-49). All materials are re-usable and shoe is fully dismantable.
Light blue disposable gloves in nitrile. The profile guarantees excellent grip in dry or humid conditions. Un-powdered. Weight (size M): 3.5 g / Thickness: palm 0.07mm / fingers 0.11mm / cuff 0.06 mm. Applications: Light chemical applications in labs, assembly, product control, food sector. Tested for food contact. Available sizes: S-XL.
This Essentials Rain Pack is delivered as a set. This lightweight suit can easily be rolled up to store when it does not need to be used. Comes in a retail package, perfect for shop displays. Characteristics: ● Watertight and taped seams prevent ingress of water ● Ventilating back and eyelets for improved breathability power and comfort ● 2 bags for safe storage ● Concealed hood for extra functionality ● Elastic cuffs for a good fit ● Fully elastic waistband for ultimate comfort ● Adjustable with press studs for a secure fit ● Retail packaging suitable for retail sales ● jack and trouser set for convenience ● Extremely water repellent. Quality: 100% Polyester, 190T, PVC Coated 190g. Available colors: Marine. Available sizes: S-3XL. Complies with: EN 343: 2003 + A1: 2007 / class 3-1.
Gloves made of sturdy, top-quality cowgrain leather with wplit leather back. Has a perfect fit, reinforced seams along the fingers and high tactility.
Protection film for screen as accessory of hoods M-106, M-107, M-306, M- 307, M-406, M-407. No PPE.
This insole serves for effective shock absorption at too high longitudinal vault.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has anti-slip coating. Test voltage of 5,000 volts, operating voltage of 1,000 volts. Length 41 cm, Sizes: 7-12.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable 3D-mesh liner. Outsole in PU/E-TPU/PU rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. A natomical, perforated. 100% metalfree. Sizes: 35-48.
High-cut, black safety shoe in full grain leather with steel toecap and antiperforation midsole. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight duocomfort (PU/Nitrile) outsole, with heel profile, high wear resistance, antistatic, slipresistant, resistant to oil, petrol and acid, high shock absorbency.
A glove with high finger sensitivity provided with a nitrile foam coating on a dark gray medium gray nylon. Made upon the principle: Hybrid Coating Technology. Resistance abrasion perfect and very comfortable to wear. The lining extends to the joints (knuckle coated = KC). The glove is also Oil fugue, more resistant than the PU and is also more resistant when heating the PU. Ideal for any activity where sensitivity in the fingers is necessary as the assembly, assembly, packaging, automotive, etc.. Sizes available: 7-11.
Low safety shoe in microfiber/textile with a synthetic toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant. 100% metal- and leather free.
Completely seamless gloves made of nylon with polyurethane coating on the palm. Extremely high wear comfort due to breathability, perfect fit and optimal tactility. Available in: white, grey. Sizes: 7 / 8 / 9 / 10 / 11 / 12.
Finger-sensitive glove with nitrile coating and nipples. Coating resistant to contact heat of 250°C for 15 sec. Gloves GS industry.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Hi-vis softshell for ambulance workers with 2 vertical front pockets, zip, 1 inside pocket, 1 right chest pocket, Napoleon pocket, radio loop and radio pocket. Elastic and adjustable cuffs, badge holder on the chest, round velcro on the sleeve for the zone badge. Quality: 100% polyester + PU coating + fleece, 330 gr / m². Available sizes: XS-5XL. Yellow reflective prism bands Available colors: fluorescent yellow / enamel blue. Conforms to: EN ISO 20471 Class 2 (XS-M), Class 3 (L-5XL)
Further perfected version of this low-cutsafety shoe that has been a standard for years. The combination of topgrain hide leather, synthetic lining, the extra-wide width and the self-cleaning andimproved sole profile makes Muscat an exceptionally comfortable, robust,low-cut safety shoe. In addition, a new antistatic and antibacterial insole with integrated gel cushion provides optimal shock absorption. Sizes: 35-48.
High black safety shoe S3 HRO with steel toecap, steel sole plate over-toe, made from full grain cowhide leather. With SympatexAirflow inner lining, air conditioning for your shoe, bacteria and virus repellent. A 100% polyester membrane that is waterproof from the outside, but lets sweat from the inside out through the lining layers; a breathable shoe. Complete insole: anti-bacteriological, moisture absorbing, breathable, washable, anti-static. Provided with a polished water-tongue. Light sole (rubber soles with polyurethane insole), high abrasion resistance, anti-static, anti-slip, oil, gasoline-acid resistant. With quality support insole. Fit XD.
Seamless waterproof nylon glove with thin double nitrile coating. Good dexterity, grip and elasticity because of lining. Length: 30cm. Antistatic, latex and silicone free, food approved .
Very thin (18GG) and flexible cut resistant work glove with a Guide XLNT™ nitrile coating. This coating protects against oil and also provides excellent grip in both dry and oily environments. The coated knuckles and the double coating in the palm provide excellent protection against liquids and oils. Approved for contact with food and for contact heat level 1. Oeko-Tex approved. Touch screen function. Sizes: 7-11. Complies with: EN388:2016 4.X.4.4.D, EN407: X.1.X.X.X.X
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level E, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.
Dust mask, class P2, for harmful dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and re duce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fit ted with non-adjustable, elastic headbands. NPF: 10.
Sturdy glove made of 100% nitrile with rolled cuff. Fingertips with textured finish for extra grip. Completely powder-free and free of natural rubber, wax, silicones or softeners. Touch N Tuff offers 3x more perforation resistance than vinyl and natural latex!
Coverall, non-woven, limited use, flame retardant, chemical resistant coating, antistatic, hood with elastic, double zip closure withdouble flap, elastic at wrists and ankles. Available in: grey, orange.Suitable for: MultiRISK applications in chemical and petrochemical companies, refineries, tank cleaning. Sizes: S-XXXL. EN14605 type 3 & type 4, EN 1149-3, EN ISO 14116 index 1
Durable quality leather welding gloves in red cow split leather with full seam protection and jersey lining. Kevlar stitched. Sizes: 9-10-11-12. Length: 35 cm. welding.
Gloves with American cut, with heat resistant cowsplit leather (to 350 ° C), lined with molton wool around the hand and the cuffs, veinprotection, cuffs made of natural split leather with Kevlar seams.
Low shoe in waterresistant white Lorica, with a metal free 200J toecap.Fitted with an abrasion resistant breathable liner in Texelle. Outsole in double density PU. 100% metal free. Sizes: 36-48. Weight: 445g. FO SR.
Blue fitover safety glasses with pressure-free fit. Very light, fits over most prescription glasses. Frame in synthetic material and clear polycarbonate lenses with integrated side shields. The innovative temple concept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean. general industrial applications.
Further perfected version of this high-cut safety shoe with rubber toe bumper, that has been a standard for years.The combination of top grain hide leather, luxurious inner finish in leather,extra-wide width and the self-cleaning and improved sole profile makes Merlot CAP an exceptionally comfortable, robust, high-cut safety shoe.In addition, a new antistatic and antibacterial insole with integrated gel cushion provides optimal shock absorption. 100% metalfree. Sizes: 35-48.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
Safety glasses Silium PC Blank with metal frame, glass with anti-vapour/anti-scratch coating. Provides protection against impact-ris ks and UV radiation.
Metal safety glasses in antique silver color, with polycarbonate lenses to protect against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. The side protection in clear polycarbonate and riveted. Separate matching pouch available.
Hi-vis rain jacket with detachable bodywarmer / Multifunctional 4 in 1 product / Can be used in all weather conditions / / 100% waterproof / Windproof / Highly breathable / Water repellent outer / Fabric / Moisture attracting coating on the / Inside / Comfortable / Supple / High tear resistance / Taped seams / Outside: Straight collar / Foldaway hood in collar / Zip closure under flap with touch & close fastening / 2 inset pockets / 1 Napoleon pocket / Kimono sleeves / Elasticated wristband with narrowingby touch and close fastening / Drawstring in waist / Back length 85 cm (L) / Inside: Fixed mesh lining / Knitted wind cuffs in sleeves / 1 / Inside pocket with zip closure / Zipper in back lining for placing logos / Fabric: SIOPOR® Ultra: / 100% polyester / Fabric with / 100% PU coating; ± 195 g / m² Colour: 320 hi-vis yellow / green - 717 hi-vis red / grey - 065 hi-vis yellow / navy - 279 hi-vis orange / navy
Knitted bleached cotton, fourchette style, hemmed edge, standard version, sizes 7-12. No PPE
Safety glasses with transparent frames with anti-slip arms and anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. Free glasses cord.
Hi-vis vest in 100% polyester with zip. Available colors: Fluo yellow and fluo orange. Available sizes: S-3XL. Compliant with: EN ISO 20471 Class 2.
Budget-friendly glove with black PU coating, large size range.
Very comfortable half-mask made of silicone rubber, fully maintainable. Fitted with adjustable head and neck bands for precise adjus tment of the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6 057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fil ter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
These reusable earplugs are an ideal alternative to otoplastics for personnel who are only temporarily exposed to noise or for temporary personnel who work under noisy conditions. The Comfoor Parttime includes a unique filter that filters out all the harmful noises, without completely blocking the ear. As a result, conversations and sounds from the surroundings remain audible and there is no sense of vertigo. It is made of skin-friendly, durable silicone material that easily conforms to the ear. The result is a good seal and superb wearing comfort. Thanks to the unique design and special grip, the Comfoor Parttime is easy to place in the ear and to remove. Can be optionally fitted with a cord with clothing clip. Available in: green.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-50.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Offshore safety boot in brown full grain leater with steel toecap and antiperforation midsole. Fitted with a fur lining and insole in molton/fur. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 37-49.
Water and chemical resistant high shoe in coated leather, with a steeltoecap and antiperforation sole, waterresistant padded tongue. Anti-transpirant liner in Sympatex membrane Airflow. Leather insole, outsole in nitrile and polyurethane, oil-, petrol- and acid resistant, antistatic and antislip. Colour: black/grey. In line: ISO EN 20345 S3 HRO SRC.
High shoe with brown water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in POROMAX: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Hi-vis men's polo for ambulance drivers with contrasting collar, cuffs and shoulder pads. Pen pocket on the left sleeve. Segmented reflective tapes Quality: 60/40 cotton / polyester piqué tricot 180 gr / m². Available colors: fluorescent yellow / enamel blue. Available sizes: S-4XL. Conforms to: EN ISO 20471 Class 2.
Tracker II hybrid safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below, and is ventilated laterally and at the top. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti- fog coating.
Low sporty shoe in blue waterproof nubuck leather. Provided with an aluminium 200J toecap and non-metallic anti-perforation sole. Lining in breathable textile, removable and anatomically shaped insole. Sole in PU / PU. Sizes: 36-47.
Heat resistant safety helmet made of fibreglass reinforced polyester. The high-quality helmet maintains its shape to 500 °C and has a 6-point textile suspension, leather sweatband and wheel ratchet. Available in: white, yellow, blue, red, green, orange.
Grey metal safety glasses with polycarbonate lenses with protection against impact and dust. Equipped with a scratch-resistant layer and anti-fog coating. Adjustable nose pads and adjustable temples. The side protection in clear polycarbonate and riveted.
All-round gloves, made of water and oil resistant cowgrain leather. Electra plus has artery protection and a latex cuff. Sizes: 7 / 8 / 9 / 10 / 11.
Light (340 g) safety helmet made of polyethylene with mid peak (neither short nor normal length). Quality and comfort are guaranteed due to theimproved, permanently attached 6-point textile suspension with ratchet(53-64 cm), fitted with a highly absorbent sweatband, made of 2mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi- slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter. The production date is printed on the right top above the peak in the base of the neck protection. colours: white, blue, yellow, red, hi-viz yellow, orange, green, grey, black, hi-viz orange IN COMBINATION with silver, hi-viz yellow, hi-viz orange neck protection.
J-Energy series. High shoe in waterresistant black nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/E-TPU (Infinergy / Adidas Boost Technology), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Economical solution for light applications where a durable coating and firm grip is required for working in greasy conditions. The double-layer nitrile coating with a roughened finish keeps hands dry and comfortable, and provides a good grip. Fully coated glove on 13 gauge polyester liner. Sizes: 6-11. Conforms to: EN388: 2016 4.1.2.1.A
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Ergonomic pre-shaped dust mask in soft filter cloth with nose pad that takes the shape of the face. No nose clip or metal parts. With adjustable elastic headbands.
Flame retardant, anti-static fleece, double sided fleece: 54% protex/34,2% coton/10% nylon/1,8% AST; 310 g/m², soft fleece material, good cold protection, breathable, can be zipped into different jackets, anti-pilling treatment, Stitched seams, straight collar, zip closure under flap with touch <(>&<)> close fastening, 2 inset pockets with zip closure, round inset sleeves, elasticated cuffs, elastic drawstring in hem , 1 inside pocket .
The new INTERCEPT™ fibre offers unrivalled cutting protection and more comfort and mobility. The coated palm design gives the user more grip, prolongs the life of the glove during abrasive work and allows the back of the hand to breathe. The grey coating camouflages dirt when working in polluted environments. Sizes: 5-11.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Practical plastic helmet hearing protector with patented technology that dampens the entire frequency range equally so the sounds ca n be heard softly yet without distortion. The perfect protection for low noise levels and applications involving electricity. Only f or attachment to safety helmets.
Coverall, 63gr./m², microporous fim laminated, good moisture vapour transmission, three-piece hood, antistatic, elastic at hood, elastic at wrists, elastic at ankles, elastic at waist, zip closure under flap, 3- threads overlock and taped, breathable back in Safegard blue. Available in: white. liquids and hazardous dry particles, paint spraying, general cleaning and maintenance applications, asbestos removal and handling, food processing applications, protection against oils & resins. In line with: EN1073-2, EN1149, prEN 13034 Type 6, prEN 13982 Type 5.
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant textile liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49 (L) en 41-49 (XXL).
Lightweight, lower-profile ear muff X4 with shells in TPU/ABS, with highlighted colors for better visibilty. Utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. Easy adaptable with 'grip areas". Durable, ergonomic and very lightweight with high protection against noise. Combinable with respiratory- and eyeprotection. SNR: 32dB.
Shirt, 60% merino wool 25% polyester 13% polyamide, 2% elastane, long sleeved crewneck shirt made of circular knit fabric, and has no lengthwise seams. The back is longer to prevent gaps, cuffs are knitted in.
Guide 6202 CPN - A cut, puncture and needle resistant glove in soft synthetic leather for good versatility and a steady grip. Alycor etechnology in the palm, over the fingertips and the upper surface of the fingertips; protects from needles and other sharp objects. Designed particularly for situations where it is vital to keep sensitivity and where there is a risk of needle puncture and cut injury. The glove is designed fully in black to achieve as low profile as possible. Suitable for police and customs officers, security guards and prison officers where there is a risk of needle puncture and cut injury. Sizes: 6-13
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49.
Classic fitover glasses with unlimited field of vision. Soft temples (DCT) adjustable in length. Fitted with clear polycarbonate lens that provides 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With Supravision Sapphire coating coating: extremely scratch resistant, chemical resistant and easy to clean. EN166/170 2-1.2.
Impact resistant glove with cut-resistant liner and nitrile coating. Sizes: 7 (s)- 12 (3xl)
