BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Practical plastic hearing protector (di-electric) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s nitrile coating provides good grip. Impact-resistant backhand, 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level E, approved for contact heat level 1. ESD approved and food safe. Oeko-Tex approved. Touchscreen. Sizes : 6-12.
Insulating sock with foam inner layer for extra wearing comfort in boots. Breathable and absorbs perspiration. Sizes: 36-49.
Universal aluminium helmet attachment system for a wide range of safety helmets. Super-lightweight and hinged. For use with Fitt All visors.
Large particle pre-filter, for installation between dust filter and spark arrestor in Adflo motor unit. Prevents rapid clogging of g as and dust filters, which increases the service life. Very useful for work in very dusty environments.
2-in-1 shower gel for hair and body with skin-friendly sugar-based surfactant conditioner. With fresh unisex fragrance. Content: tube of 250ml PPE category: not applicable. Previous name: Stoko Hair<(><<)>(> <(>&<)><(><<)>)>Body
Low shoe S1P in perforated microfibre with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Knitted cotton (interlock), with knitted wrist, men?s and women?s size. NO PPE
Gloves made of cowsplit leather with a 7 cm protective cuff. Available in: green/white. Sizes: 8 / 9 / 10.
Very light, thin gloves that nevertheless keep the hands warm. LightCold gloves are often used as liner gloves during the winter. Tricotwithout seams, ambidextrous, made of polypropylene/lycra. Can be uses in food industry. Available in: blue, one size.
Glove with nitrile coating on cotton / polyester liner. This glove provides protection for the whole arm. Length: 65 cm. Glove with high sensitivity and good grip.
High shoe Till ESD in black full grain leather, fitted with a steel toecap and metallic antiperforation midsole. Lining in synthetic material, insole with fleece liner. Outsole in PU/Rubber, resistant to fats and oils. Fitted with a scuffcap. Sizes: 36-48.
The first ultra-light weight HyFlex® style to combine a ¾ dip geometry, oil repellence and oil grip into a highly dexterous, high comfort glove. The HyFlex® 11-925 features Ansell’s proprietary grip technology providing reduced risk of slippage in dynamic environments. The liner is constructed with fine gauge nylon/spandex yarn providing the user with an unrestricted second skin feel. This unique blend of protection, performance and flexibility features bridges the gap from previous generations of ¾ dip oil repellent general purpose gloves, delivering enhanced flexibility, tactility, oil grip and extreme comfort.Sizes: 6- 11. In line with EN388 3.1.1.1.
Schubert 4-point chin strap.
ABEK2P3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus dust, vapour and smoke particles. Only for use with full face masks with standard threads. Class 2 gas filter: for max. concentration of 0.5 %. risks. Weight: 345g.
Replacement knifes Maxisafe, straight with large cutting part surface (55.5mm). Thickness: 0,63 mm. No PPE.
ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.
Insole which emits heat for 7 hours after packaging is broken. Not PPE.
Belt with metal buckle in high quality leather. Available sizes: 65-95cm / 80-110cm / 100-130cm. Width: 4 CM. Available colours: black, brown.
Multifunctional glove for police task forces, secufrity guards, customs and defense. Feels like second skin due to the liquid repellent and flexible goat skin leather. The spandex nylon on the back of the hand gives high comfort and breathability. Cut and heat resistant, flameretardeant liner. Reinforcement of the crotch between index finger and thumb, Neopreen knuckle protection. Short cuff with cutout for watches. Sizes: 6-13.
High shoe in waterresistant black full grain leather, with a non metallic antiperforation sole FleXtane™ By Jallatte, and aluminium 200J toecap. Fitted with a breathable 3D-mesh liner. Outsole in PU/E-TPU/PU rubber, SRC antislip, oil and carburant resistant. SOFT insole in BASF Dynamic polyurethane, cushions pressure points, improves the distribution of weight and heel shock absorption. A natomical, perforated. 100% metalfree. Sizes: 35-48.
Universal, leather glasses case with zipper closure. of safety glasses. Dimensions: 19x9cm.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has a rubberized cuff of 6cm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
High shoe in full grain leather, fitted with a steel toecap and synthetic antiperforation midsole. Lining in Gore-Tex, insole ESD. O utsole in PU/PU, resistant to fats and oils. Sizes: 40-48
Ergonomic pre-shaped dust mask in soft filter cloth with nose pad that takes the shape of the face. No nose clip or metal parts. With adjustable elastic headbands.
High shoe in brown water proof full grain leather AP 23, which was treated by Jallatte in an exclusive manner. This high quality leather offers an extra protection against humid weather conditions and spots. The shaft has a leather lining in order to protect the ankles and the Achilles tendon. The dual density sole out of Softane has a good slip resistance and protects against oil and hydrocarbons. This shoe has a good shock absorption. Perforated nose in Aérane-Tech polymer, which makes the shoe lighter. Thanks to these perforations the sweat can easily leave the shoe. The midsole is seamed directly onto the shaft which makes that the foot is 100% closed in. The anti-perforation midsole Flextane HP by Jallatte is 100% Composite. Sizes: 35 – 48.
Black flocked 30 cm gloves in unlined neoprene. Thickness 0.75 mm. Very good finger sensitivity. Protection against a wide range of chemicals. Ideal for use in a cold environment.
Shock damping, perforated insole with maximum moisture absorbency. Viscose perforated liner. Spring is a budget-friendly insole, suitable for any type of shoe. Sizes: 36-47.
Low shoe in water repellent suede split leather, with a synthetic antiperforation midsole zero penetration and synthetic 200J toecap. 3D- lining in textile, soft and very breathable for better comfort. Sole in PU/PU. Inlaysole in PU foam. Sizes: 38-48.
Low shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 40-48.
ABE1 filter protects against organic and inorganic gases and sulphur dioxide. Can be used in combination with the Adflo motor unit. If ABE1 filter is used in combination with Adflo dust filter, use of the heavy duty battery is recommended if 8 hours of operation o n a single battery is desired. Class 1 gas filter: for max. concentration of 0.1%.
The X-fit, with cord, has an innovative ‘X’ recess that makes it easier to remove the earplug after use/ the ‘X’ also reduces pressu re in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate bag.
Super-light (300 g) safety helmet made of strong ABS. With 6-point textile suspension (51-63 cm) and highly absorbent hydro-flock sweatband. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. Can be fitted with flip-up safety glasses (to order separately: 1000242).
Heavy-duty, durable green/yellow gloves in neoprene combined with flocked natural latex. Thickness 0.70 mm. Excellent grip on dry and wet objects. Suitable for aeroplane assembly, battery production, chemical plants, electronics sector, agricultural chemicals and poultry slaughterhouses and processing.
High shoe in full grain leather, fitted with a steel toecap and steel antiperforation midsole. Lining in textile, insole ESD. Outsole in PU/PU, resistant to fats and oils. Sizes: 36-48
Bodywarmer, Guardian H²O, flame retardant, anti-static, zipper under flap, porto phone pocket, 2 lower pockets with velcro closure.
Insole to support the flat longitudinal arch and gives comfortable cushioning.
Low safety shoe in microfiber/textile with a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Flame retardant safety vest with RWS reflection. Quality: 100% Polyester with flame-retardant finish, 120 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS / S - 5XL. Compliant with: EN ISO 14116 index 1, EN ISO 20471: 2013 CLASS 2, RWS.
Sleeve, Tyvek®, length 50cm., adaptable for shorter arms. Available in: white. Sizes: universal size.
Hypo-allergenic gloves. The patented PVC immersion method guarantees a high resistance to various harmful chemical products, while the Kevlar® liner provides a high resistance to cutting, abrasion and tearing. Available in: blue. Sizes: 8M / 9L / 10XL / 11 XXL.
Low shoe Run in water repellent split suede with Geox side transpiration system (Net Breathing System). Equipped with an aluminium 200J toecap and a synthetic anti-perforation sole. Inside lining in breathable nylon and breathable insole. Sole in PU/PU. Sizes: 35-48.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. Sizes: S, M and L. NPF: dep endent on the filter used.
Thicker and longer version of the 58-430. Nitrile glove with grip technology for extremely firm grip. Flocked cotton lining. Food ap proved, without silicones, antistatic. Length 38 cm. Sizes 7 - 11.
A safety boot with a very smooth shaft for excellent hygiene in the food factory. Easy-to-clean shaft and sole. Steel 200J toecap. Sole in PVC/Nitril (Acifort). Colour: white. Size range: 34/35 - 49. Resistance: minerals, animal and plant oils and fats, disinfectants, fertilizer, solvents, various chemicals.
Gloves with blue nitrile layer on a jersey lining, palm coating and tricot cuff. Excellent abrasion and cut resistance and very good grip when working with oil and greases. Flexible, comfortable and ideal for use in automotive, construction and metal working indus tries. Application: heavy working conditions. Sizes: 8-10.
Handy and comfortable glove keeper that is very simple to use. Can be attached to the clothing. Includes a safety break point. Colour: yellow.
Blue safety goggles type Skylite with soft grey DCT element. Offerscomfort and a profound protection, and adapts to the face perfectly.Combines the security of goggles with the comfort of a pair of glasses.Plastic frame and clear polycarbonate lenses. All Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres, this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Hi-vis rain jacket with detachable softshell, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multifunctional 4 in 1 product, can be used in all weather conditions, 100% waterproof, windproof, highly breathable, water repellent outer fabric, moisture attracting coating on the inside, comfortable, supple, high tear resistance, taped seams, straight collar, foldaway hood in collar, zip closure under flap with touch <(>&<)> close fastening, 2 inset pockets, 1 Napoleon pocket, kimono sleeves, elasticated wristband with narrowing by touch and close fastening, drawstring in waist, back length 85 cm (L), fixed mesh lining, knitted wind cuffs in sleeves, 1 inside pocket with zipper in back lining for placing logos.
Trousers, Bizweld™ 330g, Designed to give maximum protection and comfort to the wearer, our Bizweld™ Trousers will keep you safe. The garment has a Flexi-Fit waistband; twin stitched seams for extra stength and side pockets with a conveniently placed rule pocket for quick and easy accessibility.
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
High shoe in nubuck leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 38-47.
High shoe in microfiber, with a non metallic antiperforation sole and composite 200J toecap. Fitted with a Gore-Tex membrane. Outsole in TPU/PU, SRC antislip, oil and carburant resistant. Removable, pol yurethane insole with textile layer. 100% metal- and leather free. Sizes: 38-48.
Knitted cut resistant glove (long cuff 13 cm) with a new foam nitrile coating with touch screen functionality. The lining consists of high cut-resistant PE fibers, nylon and Spandex. The nitrile coating (on the palm) provides an extremely good grip on dry, but also on wet and oiled surfaces. Very comfortable and excellent protection against abrasion and with an extra reinforcement between thumb and index finger. Also provides protection against contact heat up to 100 ° C. Application: glass industry, metal assembly, injection molding of plastics. Available sizes: 7-12. Conforms to: EN388: 4.X.4.3.D and EN407: X.1.X.X.X.X.
Low shoe in waterrepellent black pull-up leather and textile, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D-meshmaterial. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Polyurethane insole Soft+ Gel with textile layer. 100% metalfree. Sizes: 35-47.
Conical earplug made of polyurethane foam. The pressure is evenly distributed in the ear, resulting in optimal comfort. Easily detec table by standard metal detectors because they contain a tiny steel ball and are attached to a detectable cord. High visibility due to blue colour to avoid potential contamination in the food sector. Non-poisonous and hypo-allergenic. Packaged per 200 pairs. Suita ble for: agricultural and food industry.
Earmuff for helmet X1 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. Small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 26dB.
Green chemically resistant apron, made of PVC C2. This apron has ties at the back and around the neck. Dimensions 90 x 120 cm. Avail able in: green. Sizes: universal.
Leather conditioner, when used regularly, ensures that your shoes remainin optimal condition. Leather conditioner protects and rejuvenates the leather, keeps it supple and makes the shoes waterresistant. Delivered in bowls of 200ml. No PPE.
Gloves with an innovative yarn structure, in nylon, with an optimalDyneema® content on the back and a polyurethane coating on the pa lm.Very high dexterity due to 18 gauge technique.The Hyflex providesexceptional comfort due to a lycra lining and the tricot cuff as well as a long service life due to the high abrasion resistance. Available in: grey. Sizes: 6 / 7 / 8 / 9 / 10 / 11, total length: 210-265 mm.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
Low shoe in white microfiber, with a synthetic 200J toecap. Fitted with a synthetic liner. Outsole in PU/PU. Sizes: 35-42.
Sporty lightweight (34 gr) goggles with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety, standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With textile headband. Includes Supravision extreme coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside.
Comfortable, universally usable safety helmet made of polyethylene with 6-point textile suspension and leather sweatband. With rain gutter, variable ventilation and extended neck protection. Available in: white, yellow, blue, red, green, orange. This helmet is also known under the name BER I/79G-R.
Stylish banded hearing protection with bracket. Innovative flexible bracket for perfect fit and superb comfort. Unique rotation movement offers optimal placement and ease of use. Soft, replaceable earplugs. Weight: 13g.
Hi-vis rain trousers, 100% waterproof / Windproof / Highly breathable / Water repellent outer fabric / Moisture attracting coating on the inside / Very comfortable / Supple / Very light / Taped seams Outside: Legs adjustable by press studs / Elastic waist Inside: Fixed lining: polyamide Fabric: SIOPOR® Regular: 100% polyester fabric (plain weave) with 100% PU coating; ± 155 g/m² Colour: FC1 hi-vis orange - FR1 hi-vis red - FY1 hi-vis yellow
Case in polypropylene (heavy duty) with two bottles DIPHOTERINE® 500ml bottle AFTERWASH II® 200ml (www.prevor.com) - spray MINIdap. With option to secure TRIVOREX® granules. This package includes a solution for first aid involving eye contact and (limited) contact with skin. www.prevor.com
Signalization softshell jacket: • good breathability; • chin protection; • chest pocket with zipper; • two side pockets with zipper; • two inner pockets; • adjustable waist. Quality: 100% polyester. Available sizes: XS-4XL. Available colors: fluo yellow / black, fluo orange / black. Complies with: EN ISO 20471 Class 3/2.
Budget-friendly glove with black PU coating, large size range.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
