BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
High shoe in waterresistant synthetic textile (100% leatherfree), with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane semi-orthopedic insole with textile layer. Sizes: 36-48.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Thicker than our average latex glove. The fingertips are thicker than most standard latex gloves for ultimate protection. The enhanced fingertips with relief allow for a sure, reliable grip in demanding work environments, while increasing mobility for more productivity. Regardless of whether the tasks to be performed are moderate or heavy-duty or whether you are working in a dry or wet environment, your hands will always stay safe and dry.
High shoe in water-repellent Perwanger leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable GEOX and active carbon activated antibacterial insole. Insole EVA + TPU/Nitrile, resistant to 300°C. Sizes: 35-48.
Work trousers in easycare material that ensures good retention of shape and color with extra compartment and extra pocket with zipper. Back pockets with flap and velcro closure. Leg pocket with extra compartment and flap with velcro closure. Folding rule pocket with knife button. The knee protection pockets can be adjustable in two height levels. Reinforcement in holster pockets, folding rule pocket and knee protection pockets. The sizes C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton. Available colors: red, sky blue, navy, green, khaki, gray and black. Available sizes: C42-C64 (extendable to C142-164), D84-D120.
Light work jacket with detachable hood and reflective piping. Under the arms is a zip with air holes for higher breathability. The zips in the arms (pit zip) increase the breathability of the jacket. The jacket has taped seams and is wind and waterproof. Quality: 100% Polyester, 145 g / m². Available sizes: XS-5XL. Available colors: dark gray, navy, black and khaki. In accordance with: EN 343 3: 4.
Exterior: Concealed button closure / Zip fly, 2 set-in pockets with flap, 2 back pockets with flap and hidden snap button closure, 1 patch thigh pocket with flap and hidden snap button closure, 1 ruler pocket with flap and hidden snap button closure, elasticated waist, knee pockets, waistband with belt loops, flame-retardant reflective tape (50 mm). Inside; identification tag. Material: Sio-Safe Essential Eco 50% cotton + 30% Tencel + 19% recycled polyester + 1% AST; +- 320 g/m. Complies with: EN 61482-2 9.7 cal/cm² ATPV 11 cal/cm², EN ISO 11612 A1 A2 B1 C1 E3 F1, EN ISO 116111 class 1 A1 A2, EN 1149-5, EN 13034 (typ PB 6), EN 17353, EN ISO 13688. Available colours: navy-fluo yellow Available sizes: 48-58 S, 44-64 R, 46-56 L
Universal face shield with anti-fog feature (1,15 mm) in acetate (chemical resistant). With a chincup for extra chin protection. Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso. general industrial applications.
Dust mask, class P3, for toxic dust. Disposable respirator with a lightweight cup featuring EVA foam under the adjustable nose bridge for extra comfort. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Fitted with elastic headbands. NPF: 50.
Hi-vis winter parka for women: Waterproof and taped seams prevent water ingress; Lightweight flexible interrupted HiVisTex Pro reflective striping; Ezee Zip; Lined for extra thermal insulation; aluminized liner; Detachable ID holder; Quick drying knitted cuff. Quality: 300D Industry: 100% Polyester, 300D Oxford Weave, PU Coated with a Dirt Resistant Finish 190g. Available colours: Fluo yellow/black and fluorescent orange/black. Available sizes: XS-2XL. Complies with: EN ISO 20471 class 2, EN 343:2019 Class 3:1 and EN 342.
Low-cut workshoe in microfiber without toecap. Lining in textile. Walking sole in PU/TPU. Sizes: 36-49.
ABE1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boil ing point >65 °C, sulphur dioxide, acidic gases and vapours. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust f ilter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Industrial protective glove. Synthetic textile liner with a synthetic coating, with 3 opened fingers: middle finger, forefinger and thumb. Seamless knitted glove, gauge 13. Made from high performance and high visible fibres, using Techcor® Knitting Technology. Sensitive grey water based mix synthetic compound palm fit coating. Water and oil repellent treatment on both liner and coating. Silicone-free and DMF-free.
Light safety helmet made of ABS and fitted with 6-point textile suspension (52-64cm) and Hydroflock sweatband. Includes European 30mm accessory slot for face protection. Has a raingutter and integrated spectacle. Electrically insulating in accordance with EN50365 for live- working in low voltage environments. Colors: White, Yellow, Green, Orange, Red, Black, Grey and Blue.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
High shoe made of water-resistant full-grain leather with a scuffcap, which guarantees extra protection against wear. This shoe also contains a Goretex lining: the 2-component membrane regulates the temperature in the shoe and protects the feet against cold and water: the water cannot penetrate the shoe, but the moisture (sweat) can still be diverted to the outside. Aluminium protective toecap and synthetic antiperforation sole. Memory protective insole made of polyurethane and Elastopan thermosensitive memory foam from BASF, reduces pressure points, improves weight distribution and absorbs heel shock. Anatomical and perforated. Sole in PU/E-TPU/PU. Sizes: 38-47.
High shoe in leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. EVA/Nitril outsole. Sizes: 36-49.
Revolutionary cut protection and excellent tactile properties, with striking yellow impact protection for better visibility, brought together in a winter glove.
Headband with adjustable ratchet, face screen and chincup in clear PC. Screen has an anti-fog coating. System with foldable hinge. In line with: EN 166 2 3 F
Lightweight and very comfortable face shield, 450 x 250 mm. With individually adjustable headband and forehead protection. Polycarbonate visor: good impact resistance, heat resistant up to 130 °C. Suitable for: general industrial applications.
Black safety/fire fightingboot in nitril rubber with 200J non-metallic toe cap and synthetic anti-perforation sole(Sizes 36 and 37/38 toe cap and synthetic anti-perforation sole in metal). Outsole in nitrile. This boot offers an excellent protection against heat with emission of chemicals and contact with flames.
Flame retardant, anti-static long john, Very soft handle, Comfortable, Good moisture regulating properties, Lightweight, Inherent flame retardant & anti-static, Outside: Front fly, Ribbed ankles for extra comfort, Fabric: 60% Protex® - 39% Viloft® - 1% AST (Jersey); ± 175 g/m². in line with: EN14116 index 3, EN 1149-5.
Safety glasses in clear PC with foam insert and headband. Metal-free frame in which branches are made of of two types of material. Contains an anti-scratch and anti-fog coating.
Low shoe in waterrepellant suede microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Lightweight safety glasses in polycarbonate and selfadjusting spring for perfect fit. This glasses have very good colour recognition, a large field of view and brings resistance to UV-rays.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With extra long cuff. Food approved. Oeko-Tex standard 100. DMF free, Silcone Free and freef of natrual latex. Sizes 6 - 11.
Strong nitrile gloves with standard grip and extra inner layer for optimal chemical protection. Excellent comfort. Anti-slip lining for better grip on oiled or greased objects, good abrasion resistance. Hypo- allergenic.
Sleeve constructed from high-tech 100% Kevlar® para-aramid short fibers.Exceptional cut resistance with dexterity. The 100% Dupont K evlar® construction offers a very high cut resistance to weight ratio. These sleeves feature thumb slots, protecting the wrist area.. Lenght: 457mm.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look. Full peak. With woven ventilation opening along the side. Size: 54-62cm.
The HAZMAX S5 HRO ESD boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 35 - 50.
Bodywarmer, 65% polyester, 35% cotton, 190gr/m², multifunctional pockets
Earmuff X1 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. Small housing. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 27dB.
3M ™ Solus ™ 2000 with clear PC lens and adjustable ear branches. The glasses are available with an anti-scratch and anti-fog coating. Marking: 2C-1.2 1 FT KN.
Multirisk jack with concealed press stud fastening, 2 inset side pockets with concealed zipper, inner pocket, 1 breast pocket with flap, sleeves with adjustable press studs, reflective tape on shoulders, extended back, back pleats. Quality: 79% / 20% / 1% Cotton / Poly / AS. Available colors: blue / gray. Available sizes: XS-2XL. in line with: EN 1149, EN 13034, IEC 61482, EN ISO 11611 (front class 2) and EN ISO 11612.
Constructed using premium HiVisTex Pro tape, this Cotton Comfort t-shirt offers excellent freedom of movement due to its segmented tape design. Lightweight, stylish and breathable. Quality: 55% cotton / 45% polyester. Available sizes: XS-4XL. Available colours: Fluo yellow/black, fluo yellow/navy, fluo orange/black and fluo orange/navy.
Black powder-free disposable glove made of soft nitrile with extended cuff for extra protection of the wrist and forearm. Fully embossed for a reliable and consistent grip. Silicone and latex free and antistatic. The black color makes it easy to see if the hands have come into contact with potentially dangerous powders. The glove has been tested for phentalyl and stomach acid (vomit), simulating a dangerous overdose from practice. Suitable for use in the food industry. Length: 300mm, palm thickness: 0.14mm, finger thickness: 0.17mm. Sizes: (S) 6.5/7 - (XXL) 10.5/11. Complies with: EN ISO 374-1:2016 Type B: JKPT, EN ISO 374-5:2016 Virus, EN421
Blue, unlined nitrile gloves with Aquadri composite to keep hands free of perspiration. Very good physical characteristics, great ta ctility, silicon-free. Good chemical resistance to greases, oils, hydrocarbons, water-thinned solutions and various acids.
Prairie sole inserts are made of leather with a felt layer. They are breathable, mildew resistant and do not conduct heat or cold. S izes: 36-47.
Robust glove with a thin lining in PVC type 690: Long sleeve model (60 cm), thermally attached with elastic end, made with an air vent. Suitable for immersion, disinfection, cleaning of sewers, deep sea fishing.
Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on one side a standard snap hook and on the other side scaffolding hook Maxitube.
Polar Fleece 300 gsm, 100 % polyester,300 gsm, short-cropped and combed anti-pilling fleece, set-in sleeves, tone-on-tone full zip, pockets with zip, adjustable hem with elasticated cord pull and stoppers, easy to decorate.
Lined working glove in synthetic leather. With open cuff, very thin. Sizes 7-11.
Gloves made of heavy cowsplit leather. The gloves are lined and have a rubber reinforced cuff (7cm), elastic in the back and protection at the knuckles.
Safety glasses with grey frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti- scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The permanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and in hibits vapour formation by more than 2 minutes. Not supplied with glasses cord.
Seemles knitted nylon-spandex gloves (15 gauge) with insulating layer foam nitrile on the palm. Heat resistant up to 100°C contact heat. Sizes: 6-11.
The Sweater Mulitnorm from the Tricorp Safety collection is made of 60% modacrylic, 39% combed cotton and 1% carbon with a canvas weight of 280 gr / m2. This product is EN ISO 11612 (heat and flame protection) and EN 1149 (protection against electrostatic properties) certified. Quality: 60% Modacryl / 40% Combed cotton, 280 g / m². Available sizes: XS-7XL. Available colors: Marine. Conforms to: EN ISO 11612 and EN 1149.
This glove combines tough protection with natural comfort. The Intercept™ Cut Resistance Technology provides extreme cut protection, the liner made with water-based polyurethane/nitrile provides enhanced comfort and dexterity, it is solvent free and OekoTex 100 certified. The Fortix technology provides extended use with up to 4x the durability in the thumb crotch region versus the standard glove without thumb crotch reinforcements. Latex and silicone free. Sizes: 6-11.
High shoe in smooth leather, with a steel antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex membrane. Sole in P U/Nitrile, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Intervention helmet with special self-extinguishing paint, with Nomex interior and 3-point chinstrap. Adjustable thanks to the rotary knob, 5 different sizes are available. With Pinlock anti-fog double visor.
Smartfit earplugs with removable cord are made of a very advanced material: Kraton. This material responds to body heat and adapts t o the shape of the ear canal. They are also packaged in a handy storage box.
Super-light safety helmet with micro peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Composite gloves with dielectric properties coated with natural latex, with outer layer in polychloroprene for high mechanical resistance. No need for over-gloves. Grip motif on fingers for better grip in humid conditions. Category 2: operating voltage 17,000V, test voltage 20,000V, special properties R (acids, oil, ozone) and C (low temperatures). Supplied with 1 pair of under-gloves. Length 41 cm. Colour: orange. Sizes: 8-11. In line with EN 60903.
The Stability Pro Plus insole gives extra pronation, extra support on the inside of the foot and has a central footrest (for dropped front foot). This insole gives optimal support to the heel and middle foot. It absorbs excessive perspiration moisture and promotes optimal fit due to lateral support to the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. X-Static is thermodynamic, eliminating excess heat and preventing blistering.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRA antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-50.
High shoe recyclable in microfibre with steel toecap and antiperforation mid-sole. Sole in PU/NITRIL high temperature resistant, and insole in sanitized leather. Width: D (37-49) en XD (39-49). All materials are re-usable and shoe is fully dismantable.
Low shoe S3 in microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. 100% metalfree. Sizes: 10, 11, 12: 35-52.
Flame Retardant Hi-Vis Raincoat in PU quality: • Fixed hood with drawstring • Concealed zipper under storm flap with press stud closure • Sleeves with adjustable snap button closure • Two straight pockets. Quality: 50% Polyester, 50% Polyurethane, 210 g/m². Available sizes: XS-5XL. Available colours: Fluo yellow and fluo orange. Complies with: EN 343 3:1, EN ISO 20471 Class 3, EN ISO 14116 and EN 1146-5.
Apron, Tyvek, antistatic, with chestpiece, two cords on the back to fasten, length 108 cm. Available color: white. Sizes: universal size.
Light yellow hearing protector for attachment to helmet, made of combination of plastic and stainless steel. Very light model with e rgonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Extra strong oil absorbing cloths. The perfect solution when durability or tear-resistance is required. Dimensions: 41cm x 51cm. Absorption capacity: 136 litres per 200 cloths.
Safety knife with automatic blade retraction system. Designed for all normal cutting jobs, especially box-slitting. The ergonomically squeeze lever - made out of aluminium and a soft plastic component - provides comfortable and non-slip handling. For use by right- and lefthanders. Easy blade change: no extra tools required. With 2-edge/4-point blade for extra economy. No PPE. Blades: 1016658
The SC1 in bleu laminate is a single use Type 3 splash contamination suit designed for use with breathing apparatus worn outside the suit or with a face mask and filter. One piece construction, with chemically protective laminated gloves Kemblok welded to the suit material and integral socks in the same blue laminated material. Hood with neoprene rubber face seal. Sizes S - XXL: SCertified to EN14605:2005
ABEK2 gasfilter in plastic housing for Moldex masks series 7000 and9000. Protects against inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 2 gas filter: for max. concentration of 0.5%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
Very durable gloves for all extended tasks in cold conditions. Double nitrile coating on insulating lining.
High shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a SympaTex liner, SRC antislip, oil and carburant resistant. PU/rubber outsole. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Pre-formed, washable and reusable earplugs made of soft foam rubber for a perfect fit. Fitted with vinyl cord to prevent loss. 50 pa irs per package.
A mid-cut new designed lightweight safety shoe with extra ankle support, knitted textile upper and BOA® Fit System. Outstanding ergonomics, padded Memory foam and water repellency means day-long safety and comfort. An oil resistant RPU outer sole gives outstanding grip and a ventilated inner sole keeps feet cool. Features JALAS® aluminium toe cap, plasma-treated textile puncture protection and double impact protection zones in PORON® XRD®.
"Winter bomber jacket with detachable sleeves, SIOPOR® Ultra: 100% polyester fabric with 100% PU coating; ± 195 g/m², multi-functional jacket with detachable sleeves and fleece lining, taped seams on the inside, extended back, Straight collar, foldaway hood in collar Zip closure under flap with touch & close fastening, 1 Patched chest pocket with zip closure, 2 Inset pockets, 1 Phone pocket, sleeve pocket + penpocket(s), 1 Mica pocket, detachable sleeves, elastic at end of sleeves with narrowing by touch & close fastening, elasticated at the sides of the waist, back length 75 cm (L), fixed lining:polyamide in body + quilted sleeves, 1 Inside pocket, zipper in back lining for placing logos, detachable fleece lining in body, 1 Patched pocket. In line with: EN343 3.3., EN 14058"
Firefighting jacket in NOMEX® STRIKE, 220g/m², SOFIGUARD treatment with PU FR membrane (145g/m²) and aramid lining (250g/m²). High separate collar, patched radio pocket, microphone loop, zip closure under flap with velcro closure, cuffs with thumbloops, 2 patched pockets with flap and hole loops, torch holder, coated KEVLAR® reinforcements on shoulders and elbows, elongated back, bottom hem finished to prevent water rising, extra internal thermal reinforcements on shoulders and arms. Available colours: navy. Available sizes: S-4XL.
