BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Crosstech (resistant against bacteria and chemicals). Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Sizes: 38-48.
Low shoe in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Semi- orthopedic insole which is conform to ESD. Sizes: 38-48.
Charlotte made of PP and folded. After use it remains open, so one sees the difference between used or not. Available in different colors. Packed in plastic bag or dispenser box. Very good fit. Feather light and pleasant to wear. Available sizes: Universeel (52cm en XL (55cm).
Shift work trousers with concealed zip, thigh pocket with concealed snap closure, 2 inset side pockets, ruler pocket with tape measure, adjustable elastic at the waist, 1 back pocket with concealed snap closure, reflective piping, D-ring, extra insert at crotch to prevent tearing. Quality: 65% / 35% cotton / polyester, 290 g/m². Available sizes: 44-66. Available colors: Charcoal gray / fluorescent yellow.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Light elastic glove made of white Dacron fibres. These hollow fibres insulate perfectly, provide a lot of warmth and ensure rapid drainage of perspiration, which keeps body temperature in check. Pro Food Thermastat protects against cold and can be worn as a glove and lining. Suitable for operations with dry or chilled and frozen foods, meat, fish, ... in cold conditions.
Lightweight and flexible chemical suit designed specifically for protection against Ebola and other viruses. Combines Type 3 <(>&<)> 4 design with the infectious agent protection of a barrier film and stitched and taped, fully sealed seams.
Black waders in PVC, fitted with a steel 200J toecap and steelantiperforation midsole. Outsole from PVC Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Waders in PVC, 100% waterproof. Sizes: 39-47.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. A bsorption capacity: 18 litres.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Functional trousers with stretch panels on strategic places. Ventlilation openings along both leg sides. Detachable holster pockets. Leg hems reinforced with Cordura® for increased durability. Pre-bent knees. Reflective details. Leg pockets for folding rule and tools. Internal pockets for knee protectors, adjustable in two height levels. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C44-C62 (extendable to C146-156), D84-D120.
This sweater with a zipper collar is particularly shape and colorfast. The inside is roughened for extra comfort. Quality: 60% cotton / 40% polyester, American fleece. Available colors: Red, royal blue, navy, anthracite, black, lime. Available sizes: XS - 7XL.
Apron made of polyester / cotton with 3 pockets. The Gladys apron has a standard length of 80 cm. Available sizes: S-XXL. Available colors: Black, royal blue and gray.
Multinorm hood Diablo 12498.
Modern, fitted t-shirt with reinforced shoulder seams and double-stitched neckline. Elastane in board. Ribbed neck in four layers. Oeko-Tex 100 certified. Quality: 100% cotton. Available sizes: XS-5XL.
Dust mask, class P3, for toxic dust. Mask with nose bridge and seal along the entire edge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the ma sk. Mask has rigid cup form for better retention of the shape of the mask during use. Fitted with non-adjustable, elastic headbands. NPF: 50.
Comfortable half-mask with sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5 %. NPF: dependent on the filter used.
The thermal acrylic lining provides excellent thermal insulation so work is more comfortable. Excellent thermal insulation. Soft, non-fluffy. Very absorbent to maintain dry hands. Ideal as a liner under unlined over-gloves. Sizes: 7 and 9.
Composite toecap to protect the toes. Per 5 in different sizes ( 1x S : 35-39, 2 X M: 40-44, 2 x XXL: 45-48).
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Chain mail glove made of 100% stainless steel. Adjustable closure around the wrist, also 100% stainless steel. Chain mail offers maximum protection against cutting risks. The glove is ambidextrous. A coloured identification tag on the wrist band indicates the size. Sizes: XXS (brown) / XS (green) / S (white) / M (red) / L (blue) / XL (yellow).
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XCT). The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Safety ashtray Elite Smokers Cease Fire - Cool black Dimensions: 965mm x 305mm
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
Parka ripstop, 100% polyester ripstop with PVC coating, waterproof, taped seams, reflective piping, inside partly quilted polyamide partly fleece, zip with flap and Velcro, hood in the collar, lined, adjustable drawstring, elastic cuffs, elastic waist.
Bodywarmer ripstop, 100% polyester with PVC coating, waterproof, inside: 100% polyester wadding 180 g / m², retro reflective accent, zip with press studs, straight collar, microfleece lined 280 g / m².
Overshoe in PolyPropylene in white. Seamless at the bottom of the overshoe to prevent wear and tear. Dimensions: 42x15cm, fabric weight: 38g/m², thickness: 50 microns. No PPE. Package per 100 pieces.
Jacket, 100% polyester, PVC layer, 230 gr / m², fleece lining, concealed hood, fleece lined upper body, print opening, spacious fit, secure pockets, adjustable cuffs through Velcro. In accordance with EN 343 3.1.
Pre-filter for TR-600. Ensures longer life of main filter.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Cut resistant glove on seamles knit liner in HXFIBRE (13 gauge) without glass fiber with nitrile coating for good grip. ESD and touch screen function, reinforcement between thumb and forefinger. With velcro closure on the cuff. Food approved. Oeko-Tex standard 100. DMF free, with impact protection on the back of the hand. Sizes 6 - 11.
High shoe in microfiber, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Washable, reusable and detectable pre-formed earplugs made of softsynthetic material, with 3-rib design. These earplugs have a comfortablefit and offer excellent protection against universal noise. These earplugs are detectable by means of a tiny steel ball embedded in the front of the earplug. Ear protection with a sophisticated design that is primarily useful in the food industry. Packaged per 50 pairs. Suitable for: agricultural and food industry.
Super-light safety helmet with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-64cm) and sweatband. Optimised micro peak providing maximum upward visibility without compromising safety. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is not required. The chinstrap incorporates a quick release buckle. Removable harness also fits all other Centurion helmets. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection.
Flame retardant chinos with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Sizes available: 44-64, 146-156, 96-120 EU. Available colors: Navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
Driver extra gloves are very light, supple and durable. This glove is extremely comfortable and has a perfect fit. The top-quality sheep skin leather also provides very good tactility.
PVC gloves with cotton lining for very good sweat absorption. These Fortex gloves provide excellent resistance to chemicals and high tactility. Length: 35 cm.
Works immediately after application: it normalizes perspiration and provides a fresh effect on the feet. The antiperspirant effect also limits irritation caused by excess sweat. The spray is very suitable for treating socks and shoes. Protects the leather parts of the shoe. Contains: flacon 100ml.
Spare blades for safety cutter Klever X-change (1018439)
A supple glove with cut, puncture and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and the fingertips from needles and sharp objects. Knitted of HDPE cut-resistant fibre, which gives the whole glove cut protection level 5 according to EN 388. Liquid-proof all the way down over the knuckles, making them suitable for e.g. cleaning and wet/oily work. Extremely durable dipping. In conformity with: EN388:2016 4.X.4.3.F
The new HAZMAX S5 FPA HRO boot, in green, chemical resistant HAZMAX, constructed seamlessly, equippes a 200J steel toe cap and has an antiperforation sole in stainless steel, with an even better cut resistance than your conventional safety boot. Boot is adjustable in height. Lining in knitted nylon. Aside from strong chemical resistance against chemical vapours and materials, this boot is excellent for fire fighters. Its vulcanised sole is resistant to contact heat up to 300°C, fuel, oils and is cold-isolating. Comfortable, removable and washable inlay sole up to 40°C. Sizes : 36 - 48.
Beige/brown low shoe S3 in full grain leather with steel toecap and synthetic antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39 - 48.
Gloves with five fingers, American cut. Palm, fingers and inside of thumb are made of para-amide coated interlock.. The gloves are fully lined with an acrylic/cotton felt. Elastic cuffs, finished with bias binding. The seams are stitched with a para-amide thread, overall length is 50 cm.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin of top quality, Full grain goatskin of top quality, Cat. II, White, yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for assembly work . EN 388:2003, 2111 EN 407:2004, 412X4X
High shoe S3 in waterresistant black microfiber with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/Vibram with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12, 14: 35-52.
100 % waterproof / windproof / highly breathable / water repellent outer fabric / moisture attracting coating on the inside / very comfortable / supple Quality: 100% polyester fabric with 100% PU coating. Available colors: Hi-Viz yellow/Navy. Available sizes: S – 3XL.
Duolens glasses with modern fashion-look and extra eyebrow protection. Size is between the Pheos and the Pheos S. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non-slip components. Polycarbonate CBR65 lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. Frame: white/black.
The HL400 Lite is a dispenser, completely transparent so you see at a glance when it needs to be refilled. All parts are 100% recyclable. Dispenses earplugs very quickly. Dispenser with 1 refills (303).
Apron Prochem® with long sleeves and taped seams.
Superb protection against cuts and abrasion, successor of Hyflex 11-630
Cut resistant, seemles knitted nylon-spandex-glasfibre gloves (15 gauge) with insulating layer nitrile foam/aqua PU in the palm with longer cuff. Heat resistant up to 100°C contact heat. Sizes: 6-11.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X.
White safety boot in PVC, fitted with a steel 200J toecap. Outsole from PVC. Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Sizes: 35-50.
Modern spectacle. Fitted with temple ends with non-slip components, headband and an extra comfortable frame which creates a close seal to protect from particle ingress and splashes. Top choice for working environments with dust exposure. Polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision Extreme coating. Frame: black/grey.
Comfortable fall protection harness with 2 attachment points on the back and chest. Full D chest anchor point. Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with quick release. Harness easy to put on. Built-in foot loops to prevent hanging trauma, fall indicator front and back.
Screen carrier S54B Centurion for attachment of Centurion face shields to safety helmets. This screen carrier can be attached direct ly to the 30 mm slot on the helmet using adapter BILSOM 3712 (not included). With the addition of a BILSOM hearing protector, a comb ination head-hearing-face protector can be created.
Brown, metallic safety glasses with polycarbonate lenses which protect against dust and impact. Adaptable nose support in silicone with antislip properties benefit wearing comfort. Lateral protection in clear polycarbonate and riveted. Suitable for light or medium mechanical work and laboratory applications.
Every day in many industries, people are sustaining hand and finger injuries that are preventable. Using the correct safety devise should be an essential part of everyday life. If you are working in areas where objects could hit you on the head, you would wear a hard hat. If your eyes are at risk from foreign objects or wind blown particles, you would wear safety glasses. Think about your hands in the same way! Be sure to keep them safe and out of harms way, be sure to use the Fingersaver, don’t take risks with you hands.
Low shoe in waterresistant black nubuck leather, with an synthetic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Laces, black flame retardant. Length: 125cm. No PPE.
Knee pads for Tranemo work trousers with flame retardant properties. Quality: 100% EVA foam. Available colours: Gray. Complies with: EN ISO 11612 A1.
Flame retardant work jacket with a thin lining, making it compliant with arc IEC61482-2 class 2. Concealed zip with press studs on the front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Tunnel cord in the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Entirely metal-free. Item is produced to order. The delivery time is approximately 5 extra working days. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Compliant with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.2 *, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6. * The back of the jacket is unlined and complies with IEC 61482-2 CL.1, Arc Rating: 9.5 cal / cm². The front has an art rating of 20.20 cal / cm².
