BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Short jacket with concealed zip and concealed press studs, 2 front pockets with flaps, 2 inset chest pockets, back pleats for extra freedom of movement, escape mask loop, extra insert at armpits to promote freedom of movement, cuffs with velcro, extended back and reflective tape. Quality: 80% / 19% / 1% cotton / polyester / carbon, 4/1 satin weave + DWR, 280 gr / m2. Available sizes: 44-66 Havep. Available colors: Black / gray, gray / blue, cornflower blue / navy and gray / red. Conforms to: EN 1149-5, EN 13034, type 6, EN ISO 11611 class 1, EN ISO 11612 A1B1C1E2F1 and IEC 61482-2 (front class 2, rear class 1).
Low shoe in waterresistant brown full grain leather, with a metallic antiperforation sole and synthetic 200J toecap. Fitted with a b reathable, abrasion resistant liner in textile 3D. Outsole in PU double density, SRC antislip, oil and carburant resistant. Removable, Polyjal polyurethane insole with textile layer. Sizes: 38-47.
Flame retardant signaling vest (RWS) Flame retardant mesh / Stitched seams / Exterior: V-neck / Zipper / Back length 70 cm (L). Quality: 98% polyester + 2% AST; ± 120 g / m². Available sizes: M-3XL. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 14116, EN ISO 20471 class 2 and EN 1149-5.
Hi-vis bib pants TX52: Durable polyester / cotton fabric with a Texpel dirt-resistant finish UPF 50+ fabric blocks 98% of UV radiation Reflective striping to be more visible 10 storage bags Phone pocket Knee pad pockets, sold separately Hem adjustable with Velcro for a good fit. Quality: 65% Polyester, 35% Cotton 245g Available sizes: S-2XL. Available colors: Fluo yellow / navy and fluo orange / navy. Conforms to: EN ISO 20471 class 2.
100% polyester (420D) with waterproof PVC lining large main compartment Two pockets at the ends Large front pocket Reflective stripes on three sides Reinforced handles with Velcro Adjustable shoulder strap Content: 75 liters Dimensions: 68 x 35 x 32 cm Maximum embroidery: 14, 15, 20 round hoop Pressure surface: 35 x 20 cm, 28 x 22 cm, 38 x 32 cm Available sizes: Universal. Available colors: Navy and black.
This glove was developed together with experts from the Dutch Defense. The target was to develop a glove that offers both a maximum protection during fast roping practices and a high tactility for handling weapons in case of interventions. Where most fast roping gloves fail to meet both conditions, we designed a unique solution in the world of fast roping. The split leather palm offers superb grip on both dry and wet ropes and is a great buffer against the heat accumulation during fast roping. On top of that, in this case handling weapons with these gloves is no longer a theme. Sizes: 7-14.
Flame retardant softshell Umia with arc protection: Straight collar; Zip closure under flap; 1 patched chest pocket with flap; 2 inset pockets; 1 loop for gas detector; 1 loop for badge; 1 Napoleon pocket; Round sleeves; Sleeve narrowing by touch and close fastening. Quality: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: S-3XL. Available colors: Navy/fluo yellow.
High shoe made of microvelours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Basic Fit, Unisex , Cooldry, UV-block, UPF 50+, Kleur- en krimpvast, Ademend, Vochtregulerend, Lange Mouw, Ronde hals, UV Protectie, Circulair, Recyclebaar, Birdseye, Cooldry. Kwaliteit: 50% Cooldry/50% polyester, Birdseye, 180 g/m². Beschikbare kleuren: marine blauw, groen, wit. Beschikbare maten: XS-7XL.
ESD working glove compatible with touch screens. Seamless nylon / carbon. Without coating. Very comfortable. Sizes: 5-11.
Harness to carry fan units SR500/SR700 on the back. No PPE.
Safety helmet with integrated face shield (class 2) made of ABS. With 6-points suspension 'Fas-trac' in textile (52-63cm), with a wheel and highly absorbent foam sweatband. With 4-points chinstrap, neck and earflap protectio and European 30 mm slot for attachment of hearing and face protection. Colours: White, Yellow, Red, Green, blue, orange.
SR500 motorunit to be used with Sunström hoods and face masks. Device is equipped with a low-flow visual and auditory alarm and electronics for maintenance. Not for confined spaces. Flow rate: min. 175 or 240 L/min. Included: battery, battery charger, belt, 2x P filters, 2x filter adapters, 2x pre-filter holders, 10 prefilters, flow meter, user instructions, cleaning wipe, plug kit.Battery charging time: 0-80% capacity in 30min, battery autonomy depending on filter and set air flow: 4-7h. NPF: dependent on the mask used.
A durable neoprene glove with great dexterity and excellent grip. The glove is comfortable and flexible due to the preformed fit and the Velcro at the wrist ensures that the glove stays in place. The glove has a touchscreen function and excellent grip in the palm thanks to the Guide Grip Pattern. Padded palm and thumb/index finger reinforcement for a long glove life. Sizes: 7-12. Complies with: 2.1.2.1.X, EN511: X.2.X, EN407: X.1.X.X.X.X
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. With velcro. Outsole in MONO-PU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Fireman's gloves in heat-resistant leather (split cow leather on the back, goat leather on the palm) and para-aramid knitted cuff. Equipped with a waterproof, breathable and fire-resistant membrane with chemical protection. Cut resistant and water resistant. Adjustable velcro closure. Sizes: 6-12. Compliant: EN659
High quality dispenser with cleaning tissues, microfibre (B401) and cleaning spray (B402).
Safety knife and cutter in 1 with automatic blade retraction and optional locking for certain applications. Knife can be extended a maximum of 7.8 cm.
High shoe in microfiber, with a synthetic antiperforation sole and synthetic 200J toecap. Winch closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SR antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-49. with: EN ISO 20345 S3S FO SR ESD.
Centurion adapter S565 for 30mm slots.
Protective cover disposable for air tube in PU convenient for air caps.
The Xact-fit, with cord, adapt perfectly to the shape of the ear. The ergonomic shape guarantees optimum wearer comfort. Available in a disposable box containing 50 pairs, each pair in a carton minibox.
Hose to connect Adflo motor unit to air hood. In heavy duty rubber.
High-shoe in microfibre, fitted with a steel toecap and plastic anti-perforation sole. With Sanitized silver lining for good moisture absorption and ergonomic, comfortable insole. Outer sole in PU/PU. Sizes: 35-42.
Jaune, comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean.
Dispenser for use of 2000 ml Protect soft bottles.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
High shoe in microfiber/cordura, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/TPU (Wellmaxx), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Soft and comfortable winter lined knitted glove suitable for versatile work in semi-wet and slightly oily environments. Nitrile fully dipped with sandy finish on palm and with touchscreen function. Withstands contact heat up to 250°C/482°F. More effective energy usage in combination with use of solar energy in the production has reduced the CO2 emission by 60g/2.1 oz/pair. More effective laundry process has reduced the water usage by 70% (6 liter/1.6 gal per pair).. Sizes 6-12. Complies with: EN388:2016 4.2.3.2.A, EN407: X.2.X.X.X.X, EN511: 0.2.X
Heated body warmer. Battery must be ordered separately.
Yellow, soft and comfortable 30 cm gloves in unlined flocked natural latex. Thickness 0.45 mm. Good chemical resistance. Suitable for food processing, agriculture, automotive assembly, chemical industry, pharmaceutical industry.
Chemical protection glove, fully lined, 0,3* mm (*chem-layer) nitrile, fully dipped, sandy finish, 18 gg, nylon, oil and grease resistant, water and oil repellent, for allround work. Suitable for contact with foodstuffs, except for fatty foods. CAT III . In line with : EN 388:2016 4121X, EN 407:2004 X1XXXX, EN ISO 374-1:2016/Type A AJKMNOPT, EN ISO 374-5:2016/Virus .
Comfortable and lightweight plastic safety glasses with trendy temple design and soft nose bridge.
Elbow band for work that results in long periods of elbow strain. This band spreads the pressure on the muscle attachment point over the larger muscle mass of the lower arm, which reduces development of pain. Prevents stress-related injuries of the arms. Sizes: S / M / L / XL.
Glove made of cut resistant fibres on the entire glove, middle layer of chemical resistant nitrile on cotton liner. Offers protection against contact heat of 100°C during 37 seconds, and 250°C during 12 seconds. Sizes: 8,9,10.
Coverall, SMMS polypropylene, breathable, limited use, stitched and covered seams, antistatic, hood with elastic, 2 way zip closure with flap, elastic at wrists and ankles. Available in: white, blue.
Empty first aid kit box made of impact resistant ABS plastic. Domino(270 x 190 x 115 mm) for maximum 10 people. Suitable for all commercial buildings. Including wall mount.
Face shield in clear polycarbonate for use with face shield holder S89 or helmet face shield holder S54 CE.
Refill for first aid panel: wound cleaning wipes (3227).
Anti-static absorbent pads measuring 41 cm x 51 cm. These light-weight perforated pads are packaged in a box. Packaged per 200 piece s. The wipes are made from 1-ply melt-spun polypropylene. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorption capacity: 166 litres.
Post and cement base red/white, height 90cm. Chains and ribbons can be attached to control foot traffic.
Safety shoes required. Mandatory sign in self-adhesive polyester. Diameter: 200mm.
Gaiters, aluminized para-amide, 500gr./m², Velcro closure, no lining,strap under sole, long-term use. Dimensions: length 36cm.
Enclosures for electrical plugs Extremely effective against unauthorised or negligent use of electrical equipment. Not PPE.
Disposable Earplugs Contours, in Station dispending system large SNR 35 dB
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Yellow safety cutter with dual hook lasts twice as long as single blade cutters Unique cardboard piercing shape prevents damage to carton contents.Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments Small ridges ensure a secure grip.
Bib and brace trousers, 60% Cotton, 40% Polyester 245g, Knee pad pockets, Elastic back feature for extra comfort, Smart phone pocket. The Texo cotton rich fabric creates a very comfortable yet practical garment. This bib <(>&<)> brace offers complete lower body and leg protection. Features include a concealed bib pocket, kneepad pockets and thigh pockets. Velcro at the leg end ensures a secure fit. Compatible with the Texo Contrast Jacket.
The real remanent air-purifying spray. Natural and very powerful, for a fresh and clean atmosphere. Each spray dispenses 0.11 ml of solution and treats an area of 20m³. Also suitable for combating microbial particles in the air. Viruside test results available upon request. Use biocides safely. Always read the label and product information before use.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Length 0.8m. Anchor point for protection of one person.
Mobile anchor point made of webbing. Can be wrapped around all kinds of constructions to serve as a mobile anchor point. Equipped with 1 D-ring. A loop can be formed by passing the webbing through the D-ring. Can also be used on vertical constructions. Length: 0.9 metre. Weight: 445gr. Anchor point for securing 1 person.
Low shoe S2 in strong waterproof leather. Lining in merry mesh and a small layer of PU foam. With 200J steel toecap. Sole in nitrile with strong anti-slip resistance and good shock absorption. Removable insole with high comfort. Steel leg with added support. Sizes: 38 - 47.
Very durable and super comfortable glove, seamlessly knitted in a nylon fabric with a double nitrile coating. Glove is fully coated for applications involving a lot of oil or water. The glove provides excellent grip.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a liner in leather. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Pezatec and Pezaflex stretch outer fabric. Outer fabric treated with water repellent Teflon HP. Pezaflex inserts under the arms. Waterproof Tektor reinforcement on shoulders with reflective piping. extended back. back and underarm ventilation. Elastic waist. Ergonomic collar. Sleeve narrowing by Velcro closure. large red area: arms and chest. 1 patch pocket on the left arm with smartphonepocket "splash proof". Zipper. 2 inset side pockets with "splash-proof" zipper.
White high shoe in white microfibre with steel 200J toecap. Smartec air Sanitized Silver lining. The zipped cover provides even more protection against all sorts of dirt, germs and bacteria. With over-toe. Sole in PU / PU. Fully washable. Sizes: 35-48 Width: D.
Fireproof Blanket fiberglass. Size 100 x 100 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
Hood in 100% polyester with Gore®Pyrad® textile technology (ePFTE membrane). Laminated, to be combined with parka Ebro. Available sizes: S-3XL. Available colours: hi-viz yellow, hi-viz orange, hi-viz red.
Red backpack in Plan design Robust carrying material on both sides with reflective strips. Equipped with ergonomic handles and wide carry-straps for improved comfort on the back and shoulders. Plan design (extra strong, waterproof, anti-dirt) Dimensions: 36x47x26cm Weight 3kg - Volume 23L. Empty backpack.
Convenient plastic holder for Diphoterine Micro Dap.
Full face mask in TPE with visor in polycarbonate anti fog, with filter connection EN148.NPF depends on used filter, 2000 with motorunit T-Air. When used with motorunit, the hose 1046652 needs to be ordered separately In line with EN136-2; EN12942
Overall Industry flame-retardant treated cotton: - Concealed button closure at centre front - Single layer chest pockets with safety fl ap and button closure - Slanted side pockets - Side vents with safety fl ap and button closure, behind side pockets - Kneepad pockets - Adjustable waistband for improved ergonomics and ultimate comfort - Single layer back pocket with safety fl ap and button closure on RHS - Single layer tool pocket on RHS leg Quality: 60% cotton / 39% polyester / 1% AST, 360 g / m². Available sizes: 48-66. Available colors: Navy. Complies with: EN 1149-5, EN ISO 14116, EN ISO 11611 class 1, and ISO 11612 A1B1C1E1F1.
Particle-filtering folding mask with exhalation valve, protection level FFP3. Ergonomically adapted for large face shapes, innovative design with optimized shape, soft material edges for high wearing comfort. Continuous adjustable head band for a comfortable and secure fit. Inidvidually packed. Flexible and adjustable nose clip, compatible with Uvex eyewaer. Soft sealing lip (nose area) guarantees a secure comfortable sealed position of the mask. Activated carbon filter for odors, gases, and vapors below limit value.
Ceramic blade with rounded tip in durable nylon handle. Ambidextrous desing. Non-sparking, non conductive, non-magnetic blade. Chemically inert, blade never rusts. Oil-and lubricant-free blade, safe up to 1600°C. No PPE.
A set of high intensity, highly reflective accessory stickers, for the Nexus range of safety helmets. Helps to ensure maximum visibility of workers in low light level environments. 7 different stickers provides coverage on front, side, rear and top of the helmet.
Softshell Shift with zipper, 1 chest pocket with zipper, 2 inset side pockets with press stud fastening, sleeves adjustable by. Velcro, adjustable waist by means of drawstring, D-ring, reflective piping on the front and back of the shoulders, inner pocket with velcro. Quality: 92% / 8% polyester / elastane, 320 gr / m2 Available sizes: S-3XL. Available colors: black / gray, gray / blue, gray / red, gray / fluorescent yellow, charcoal gray and white.
