BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Multinorm winter parka with taped seams and quilted lining. Completely metal-free. Wind and waterproof. Quality: Cantex 240IR, twill PU-coated membrane, 260 g / m². Available colors: Fluo yellow / navy. Available sizes: XS-4XL. Conforms to: EN 1149, EN 13034, EN 343 4: 1, EN ISO 11611 class 1, EN ISO 20471 class 2, EN ISO 11612, IEC 61482 class 2.
Low-cut shoe made of velours, fitted with a 200J toecap. With liner in Climazone in antiperspirant textile and comfortable insole providing extra protection against mildew and heat. Sole made of PU/TPU (i-PUREnrj): suple and lightweight, oil and petrol resistant, slipresistant. In line with ESD norm.The shoe leaves no trace and has a self-cleaning profile. Sizes: 35-52 (Widths: 10, 11, 12 and 14).
Inherently flame-retardant metal-free switch pants. The pants have a zipper over the full length of the legs (outside) and are made of supple, wind- and water-resistant softshell material. Removable braces with fix-lock closure. Loops at the waist. Side pockets with flap. Front pocket with flap. Two-way zipper in the legs. With comfortable heat seal reflection. Available sizes: XS-4XL. Available color: Fluo yellow/navy. Complies with: EN ISO 11612 A1+A2 B2 C2 F2, IEC 61482-2 APC 2 (ELIM: 40.0 cal/cm² EBT: 44.0 cal/cm²), EN 1149-5, EN 13034 type PB[6] and EN SO 20471 class 1.
Emergency first aid kit Industry is supplied with a wall holder. This first aid kit is specially composed to meet the needs of the "workshop". Dimensions: L 44.5 cm x H 32 cm x D 15 cm.
Beannie Result: 100% knitted soft feel acrylic; short fashionable model; reversible; with contrasting color on the bottom edge and inside.
Isotec S5 safety boot in ultra chemical resistant and flame resistant material with steel toecap and steel antiperforation sole. Removable, washable insole. Vulcanised rubber sole, oil resistant, non-slip and heat resistant up to 300°C (contact heat). With shock absorbent tunnel system in the heel. Colour: green. Available: 35-50.
Standard fall harness with straight leg straps and 2 attachment points (back and chest). Leg straps easily adjustable. Shoulder straps adjustable by unique revolver system that avoids sliding open gradually. Chest and leg straps with buckle through buckle closure. Tires made of water and dirt-resistant polyester. Fall indicator front and back.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Low-cut, light occupational shoe in mesh with a sporty look. With breathable textile lining. Comfortable, removable insole. The outsole is made of EVA/Rubber Sizes: 36-48.
Knee protection for heavy work. The outer face reinforced with nylon provides protection against punctures. It resists cuts, tears a nd has a non-slip surface for better grip. One size fits all.
Red hearing protector with neck band. Attenuation: SNR 35. Material: plastic. Features: allows simultaneous use of helmets or other head wear. Sizes: universal. Applications: pneumatic machines, compressors.
REAKTORP3 screw-on filter DIN 148 in aluminium housing. Protects against radioactive iodine, plus highly toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads. Weight: 260g.
Protective cover disposable for air tube in PU convenient for air caps.
Face seal for 9100 AIR hoods.
Safety helmet with micro peak and integrated arc visor, made of strong ABS for improved low temperature (-40°) and side impact protection. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Head protection, large, for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01
Fabric neck protection, recommended accessory for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. Can be used if a fabric neck protector is preferred or if the standard version constantly touches the chest when welding in downward looking position.
Soft cotton spare sweatband for 3M ™ Speedglas ™ Heavy Duty Welding Helmet G5-01. 3-piece packaging. No PPE.
Probably the thinnest cut F glove on the market, made with the new advanced CRF®Omni technology, nylon and elastane. 18 gg knitted glove and PU-dipped, superior for any work with very sharp and small objects. Reinforcement between the thumb and index finger and touchscreen functionality. The new CRF® Omni technology does not contain any steel or glass fiber that can irritate the skin. The gloves stay soft and comfortable throughout the work task. CAT II . In line with : EN ISO 21420:2020 - EN 388:2016+A1:2018 3X43F
Lanyard, 1,5 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Max user weight: 140kg.
Light work jacket from the Progression collection, enhanced visibility EN17353.
Firefighter boot in black water and firerepellant PBI fabric and microfiber, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Goggle with panoramic view, fits over most corrective glasses. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable neoprene strap, so the soft mount properly to fits the face. line with: EN166 3 4 5 9 BT/EN 170 2C-1,2 1 9 BT KN.
Cut resistant gloves knit from Zirnium® thread, length 25 cm.
Smoking prohibited. Prohibition sign in self-adhesive polyester. Diameter: 200mm.
Light (340 g) safety helmet made of polyethylene with medium-length peak (neither short nor normal length). Quality and comfort are guaranteed due to the improved, permanently attached 6-point textile suspension with slide adjustment (51-63 cm), fitted with a highly absorbent sweatband, made of 2 mm thick brushed nylon. The additional neck protection not only provides increased protection but also improves the aesthetic aspects of the helmet and the visibility. You can choose from silver, fluorescent yellow or fluorescent orange versions. Thanks to the innovative combi-slot (European 30 mm + English Connect slot), you can attach various hearing and face protection accessories. The helmet is delivered in a vented version, with plugs for the vent holes. This makes the helmet suitable for use during both the summer and winter. Suitable for: general industrial applications. Helmet shell colours: white, blue, yellow, red, hi-viz yellow, orange, green, grey, black, hi-viz orange IN COMBINATION with silver, hi-viz yellow, hi-viz orange neck protection.
ALLWIK® Pillows feature a dark spunbond outer covering filled with gray polypropylene. Versatile - for use with all oil and water-based fluids.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Eye-catching, signal red galvanised 52L bin. Used for cleaning pads, sponges and other waste that is saturated with flammable and/or environmentally harmful liquids. Waste bin has self-closing lid that is operated with a foot pedal or manually. The bottom edge has ventilation openings to prevent self-ignition caused by heat build-up.
Waterproof PVC bag with small karabiner to attach to belt. Ideal for storing and transporting electro gloves. Dimensions: 450x180x70 (mm)
Inox scissors for cutting fabric or paper. Does not cut in skin.
Bib and brace trousers, 60% Cotton, 40% Polyester 245g, Knee pad pockets, Elastic back feature for extra comfort, Smart phone pocket. The Texo cotton rich fabric creates a very comfortable yet practical garment. This bib & brace offers complete lower body and leg protection. Features include a concealed bib pocket, kneepad pockets and thigh pockets. Velcro at the leg end ensures a secure fit. Compatible with the Texo Contrast Jacket.
The real remanent air-purifying spray. Natural and very powerful, for a fresh and clean atmosphere. Each spray dispenses 0.11 ml of solution and treats an area of 20m³. Also suitable for combating microbial particles in the air. Viruside test results available upon request. Use biocides safely. Always read the label and product information before use.
Low shoe in waterresistant black full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a liner in leather. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 37-47.
Poloshirt bicolor, 50% cotton/50% polyester, 180 gram/m² piqué. 1 left breast pocket, neck tape and 3-buttons closure. Straight model with side splittings. Very durable, color-and formretaining. Available sizes: XS-7XL. Available colours: Khaki/Black, White/Darkgrey, Grey/Black, Black/Grey, Darkgrey/Black, Black/Red, Black/Orange, Black/Lime, Navy/Red, Navy/Royalblue, Royalblue/Navy, Navy/Lime. Stockarticle in Darkgrey/Black sizes XS-L
Refills with Salvequick, blue detectable plasters. Each refill contains 30 sterile plasters (15 plasters measuring 66 x 39 (22) mm and 15 plasters measuring 72 x 19 mm).
First aid kit suitable for all European countries, with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, more precise and better organised! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape; temperature, dust and water resistant; maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in line with DIN13157, Resc-Q-Assist Colour System, colour guide, wall holder. Version: in line with Orange Cross contents. Dimensions: 320x220x130mm
White cotton cleaning cloths. Box of 10kg.
Hi-vis polo shirt with ARC protection: Lay flat collar; Closure with hidden buttons under flap; long sleeves; Welded segmented reflective tape. Quality: 54.5% modacrylic + 44.5% cotton + 1% AST; ± 220gsm. Available sizes: XS-3XL. Available colours: Fluo yellow/navy. Complies with: IEC 61482-2 : 2009 class 1 - EBT 7.4 cal/cm², EN ISO 11612 : 2008 / A1 B1 C1 F1, EN ISO 14116 : 2008, EN ISO 20471 : 2013 / Class 2 and EN 1149-5 : 2008.
Low shoe glove in water repellent black Matryx multi-fibre. With an aluminium 200J toecap and a synthetic anti-perforation sole. Equipped with TPU heel reinforcement. Inner lining in breathable textile and insole in polyurethane foam. Sole in PU/Nitrile, resistant to 300°C. Sizes: 35-48.
Bib and Brace with two holster pockets that can be tucked into the side pockets, one with an extra pocket and one with tool loops. Adjustable elastic braces. Spacious front pockets for phone and papers. Leg pocket with attachment for ID-card. Back pockets with flap and Velcro closure. Reflective piping on outside leg. Reinforcements on the holster pockets, folding rule pocket and on knees. Internal pockets for knee protectors, adjustable in two height levels. Size C42-C64 can be extended by 5 cm. Quality: 65% polyester, 35% cotton 245 g/m2. Available Sizes: C44-C62, D96-D120, C146-C156. Available colors: Black, navy, khaki, grey, sky blue, red and forest green.
Flame Retardant Coverall: Guaranteed flame retardant throughout its life Yellow / Silver reflex to be clearly visible Premium flame retardant reflective striping Double layer reinforced knee protection for increased strength and durability Double stitched seams for more durability UPF 50+ fabric blocks 98% of UV radiation 3 storage pockets Two-way zipper for quick and easy opening Thigh pockets Fabric: Bizflame Plus. 280g. Standards: EN 1149 -5 EN ISO 11612 A1 + A2, B1, C1 EN 15614 Available colors: Navy. Available sizes: S-2XL.
Comfortable and breathable overall with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 44-64.
Flame retardant balaclava with high protection against Electric Arc in double tricot with ELIM: 22.0 cal/cm², EBT: 27.0 cal/cm², APC 2. 20% recycled cotton. Extra protection over the shoulders. Available size: Universal. Available color: Navy. Complies with: EN ISO 11612 A1B1C2F1 and EN 1149-5.
Hi-Vis T-Shirt with short sleeves and Cooldry yarns. This offers protection against the sun through a UPF50 +. Quality: 50% Polyester / 50% Polyester, Cooldry, 180 g / m². Available colors: Fluo yellow and fluo orange. Available sizes: XS-7XL. Compliant with: EN 20-471 class 2.
Low shoe in full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a Breath Active liner, SRC antislip, oil and carburant resistant. PU/PU outsole. Removable, polyurethane insole with textile layer. Sizes: 36-47.
High shoe in waterrepellent split leather. With an aluminium 200J toecap and a synthetic anti-perforation sole. Inner lining in breathable 3D polyester and insole in polyurethane foam. Sole in PU/PU. Sizes: 35-42.
High shoe in black full grain leather, with an aluminium 200J toecap and steel anti-perforation sole. Fitted with a breathable, abrasion resistant Cool comfort and Odor Control liner in polyester mesh. Outsole in PU/Nitrile (bio-based recycled rubber), SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: W 38-48 / XW 38-48.
Cellulose acetate shield, clear, length 225 mm. For use in combination with helmet holder S54B (1000790)/S54P (1023799) and adapter 3711 (1001188)/P3EV/2 (1001189) for mounting on Centurion safety helmets. Packaged per 10 pieces. Marking: EN 166 1 F 9 3.
High-shoe in microfibre, fitted with a steel toecap and plastic anti-perforation sole. With Sanitized silver lining for good moisture absorption and ergonomic, comfortable insole. Outer sole in PU/PU. Sizes: 35-42.
Replaceble spare part if the original filter cover is in need of replacement.
Safety helmet with micro peak and integrated arc visor (class 2), made of strong ABS for improved low temperature (-40°) and side impact protection. The transparent, gray face shield provides improved optical properties. With a very high VLT (Visible Light Transmission) value of 82%, colors are much more distinguishable. With 4-point textile suspension (53-63 cm), sweatband and chinstrap. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With European 30 mm slot for attachment of hearing and face protection.
Very comfortable fall protection harness with two attachment points: on the back and on the chest. Full D chest anchor point and positioning belt. Straps easily adjusted. Shoulder straps adjusted using unique revolver system that prevents gradual opening. Harness is very easy to put on. Integrated fall indicator on the front and back, suspension trauma straps and padding on the waist belt.
Traffic cone made of polyvinyl chloride, fluorescent orange and reflective white. Height 30 cm, reflective white band around circumf erence, black non-slip base, highly visible during the day due to fluorescent orange colour and at night due to reflective propertie s.
Rope ladder made of orange, UV resistant polypropylene with 16 mm diameter rope. Equipped with two eyes at the end for hanging. Rungs are 40 cm wide, 3 rungs per metre. These ladders are made to order.
Empty first aid kit box made of impact resistant ABS plastic. Domino(420 x 300 x 150 mm) for maximum 20 people.
Standard casing for hand wheel valves. Not PPE.
Battery set 2 items.
High shoe in nubuck leather and Techno leather (long-lasting), with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Disposable Earplugs Contours, in Station dispending system large SNR 35 dB
Low shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Adapter to mount Rebel fall-block on leg of tripod AM100.
Suspension in plastic with ratchet for Peltor G2001 helmet.
Adapter for TR-600 to be combined with backpack BPK-01.
