BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Single gas detector with limited lifetime of 2 years, no maintenance or calibration required. Device is equipped with a self-test, to be performed before use. Display only shows remaining months of operation, no concentrations. Device with O2 sensor with alarms at 19.5% and 23.5% Vol. (min. 18% and 25% Vol.) Measuring range: 0-25% Vol. Compliant: Ex ia IIC T4. IP class 67 and Atex approved.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: CO with alarms at 20PPM and 100PPM. (min. 5PPM and 200PPM) Range mesure: 0-300PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (Extra option) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: H2S with alarms at 10PPM and 15PPM. (min. 1.6PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The slimline, compact GasAlertMicroClipX3 provides affordable protection against atmospheric hazards. This multi-gas detector can be operated with a single button providing ultimate ease of use and reduces user training time considerably. The GasAlertMicroClipXL is fully compatible with BWs automatic MicroDock II test and calibration system. Tamper- proof, single-button operation. Compatible with motorised pump for remote sampling. Fitted with internal vibration alarm for use in noisy environments. Powered by a lithium polymer battery. Compliant with directive 89/336/EEC and Ex ia IIC T4. 3 years of warranty on the complete device, sensors, battery. New type of O2 sensor with life span up to more than 5 years
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use. CAUTION: The infrared LEL sensor does not measure hydrogen (H2) and acetylene (C2H2).
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The actual mesuring can be read continuously. This gas detector is equiped with an infrared (IR) cell that mesures CO2 from 0 to 50.000ppm. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The BW Clip, as your everyday companion for hazardous environments, operates for up to three years maintenance-free. And with the two-year BW Clip for H2S or CO, you can get even more life for the price: Just slip it into a hibernation case when you’re not using it for a week or more, and extend its service life for that period of time — for up to a year. (extra option!) With an automated self-test, rugged protection for harsh environments, a wide-angle alarm flash and other features, the BW Clip is the most reliable detector of its kind — from the most trusted experts in gas detection. And when used with the IntelliDoX instrument management system, the BW Clip is also the most flexible and configurable maintenance-free detector on the market. With IntelliDoX, you can: - Adjust alarm set points to meet changing requirements - Track bump tests and set a noncompliance indicator - Bump 50 BW Clip detectors in less than three minutes - And more — so you can improve safety and compliance in gas detection Version: SO2 with alarms at 2PPM and 4PPM. (min. 2PPM and 20PPM) Range mesure: 0-100PPM IP rating 67 and Atex approved. Compliant with directive Ex ia IIC T4.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
Reusable multi-gas detector detects %LEL, H2S, O2 and CO simultaneously. Semi-annual calibration required. Battery autonomy: approx. 48u. With catalytic filtered LEL sensor are calibrated to methane by default. Suitable for very many applications, but less suitable for heavier compounds (C5 and above), not suitable for inert applications. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST..
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values: 1,6 - 3,2ppm.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. Alarm values HCN: 1,0-4,7ppm.
Single gas gas detector easy to operate with 1 button. Equipped with NFC, making the device easy to connect to the free Watchgas app, and therefore easy to manage. Equipped with reliable and stable sensors, developed according to the latest technology. Display shows real-time values. Alarm values can be set by connecting to the app, or by using the docking station. Battery and sensors can be replaced.
The easiest single-gas detector for Ozone to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.
The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you’re monitoring for common or exotic hazards. Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software. No PPE.
Gas detector reusable multigas detects %LEL, H2S, O2 and CO simultaneously. Including batteries and induction charger. Equipped with NFC and a large display that clearly shows information. Correction factors can be set with the WatchGas SST Range app. The device is robust and is equipped with stable sensors that remain reliable under extreme temperatures and conditions. Can be calibrated every six months. Alarm values low and high: O2 19.5%-23.5%, CO 35-200PPM LEL 10%-20%, H2S 10-15PPM. Equipped with an unfiltered LEL sensor.Alarm settings can be set to the user's preference with the SST Docking Station (1062077) and the Watchgas app.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 50h. With catalytic low power (fltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 18h. With catalytic (unfltered) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
Robust mulitgas detector with built-in pump for vrijgage confined spaces. Designed for harsh environments with a 95dB audible alarm. Detects simultaneously: %LEL, H2S, O2 and CO. Battery autonomy: up to 100h. With infrared (non-dispersive) LEL sensor. Alarm values: O2 19.5%-23.5%; CO 35-200PPM TWA 20PPM,SET 100PPM; LEL 10%-20%; H2S 10-15PPM, TWA 10 PPM, SET 15 PPM. Alarm values can be adjusted with the docking station (1062077) and with the free app Wathgas SST.
