BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Foldable mask, class P3, for toxic dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 50. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Comfortable half mask in TPE with sealing profile for extra safety and longer life cycle. Equipped with ergonomically shaped head- and neckbands to accurately adjust the mask. Can be combined with gas filters 9100 to 9600. Filters 9010, 9020 and 9030 can be mounted on gas filters.
Dust mask, class P3, for harmful dust. Form-retaining mask thanks toDura-Mesh shell on the outside of the mask. Ensures that the mask alwaysretains its shape, even when worn for extended periods or after foldingthe mask. Exhalation valve provides lower exhalation resistance and lowlevels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted with adjustable, elastic headbands. The new IonicAir filter technology reduces breathing resistance by 30%. NPF: 50.
Foldable mask, class P2, for harmful dust. Comfortable 3-piece foldable mask with soft edges to increase the wearing comfort. Fitted with non-adjustable, elastic headbands. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. Masks packaged separately. NPF: 10. Contains at least 25% recycled content, at least 30% recycled content in individual product packaging, 100% recycled content in primary carton, and at least 76% recycled content in shipping carton.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
ABEK1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boi ling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Dust filters 5911, 5925 and 5 935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%. Suitable for : processes involving chemical risks.
ABEK2HgP3 + Formaldeyde filter in plastic housing for 3M full face masks. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, formaldehyde up to 10ppm plus toxic dust, vapour and smoke particles. Only for use with 3M full face masks. Class 2 gas filter: for max. concentration of 0.5%.
Very comfortable half-mask made of silicone rubber, fully maintainable. Fitted with adjustable head and neck bands for precise adjus tment of the mask. Half-mask can also be combined with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6 057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fil ter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
P3 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
Full facial mask in very comfortable and high quality elastomer. Anti- vapor Polycarbonate visor with wide field of view. Fitted with EasyLock connection on the side of the mask for filters with similar connections: serie 9000. Without speaking membrane. The harness opens very widely, which makes it easy to put on the mask. Weight: 360g.
Comfortable half-mask in rubber, with unique sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Class 1 gas filter: for max. concentration of 0.1%. NPF: dependent on the filter used.
Dust filter holder for attachment of dust filters 5911, 5925 and 5935 to 3M gas filters. Also for use in combination with filter hol der 603 for direct connection of dust filters 5911, 5925 and 5935 to 3M half and full face masks.
P3 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M h alf and full face masks when used with filter holder 603 and dust filter holder 501. Protects against toxic dust, mist and smoke par ticles.
A2 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 2 gas filter: for max. conc entration of 0.5%.
Disposable ABEK gas filter made of plastic with rubber mouthpiece and nose bridge. Provides protection against organic and inorganic vapours, solvents, sulphur dioxide, acidic gases, ammonia and organic ammonia derivatives. Working time: at least 5 minutes. Packaged in plastic box with belt-or clothing clip. Not to be used if there is a possibility of oxygen deficiency in the ambient atmosphere. Shelf life: four years (temeratures between -5°C to 50°C and humidity 90%).
FFP3 premium flat-fold mask. Exhalation valve. Practical individual packaging. Adjustable head band. Particle-filtering folding mask with exhalation valve. Color: white. Also available with carbon filter. D label (dolomite dust test passed): maximum breathability even with really high dust levels Cannot be reused. Comfort features: exhalation valve reduces breathing resistance and build-up of heat and moisture in the mask. Fexible and adjustable nose clip. Soft sealing lip guarantees a secure, comfortable sealed position of the mask. Soft material edges for high wearing comfort. Area of use : Construction and related industries – asbestos: work of very limited scope, disposal/cleaning: contact with radioactive contaminated dust, disposal/cleaning: handling of medical waste, woodworking: sanding/brushing off paint containing chrome, woodworking: sanding/brushing off water-soluble paints containing copper, chrome or arsine, wood working – hard wood (oak, beech, tropical wood): grinding and cutting, agriculture: treatment of sick animals/animal diseases, agriculture: handling mould spores, medicine/nursing/health: bacteria, viruses, infections, Legionella, metal processing – high alloy steel/stainless steel: drilling, grinding, milling, welding: hard soldering, welding: welding of stainless steel and aluminium . Safety features: certified FFP3 face mask to EN 149 and EU Directive 89/686/EEC.
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Dust mask, class P2, for harmful dust. Form-retaining mask thanks to Dura-Mesh shell on the outside of the mask. Ensures that the ma sk always retains its shape, even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalati on resistance and low levels of CO2 and moisture in the mask. The valve also faces downward to prevent fogging of glasses. Fitted wi th non-adjustable, elastic headbands. NPF: 10.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask, with new improved exhalation valve. Protects against organic gases and vapours with a boiling point >65 °C, plus harmful dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
P filter for motor unit Versaflo TR-300. Protects against highly toxic dust,mist and smoke particles. Filters provide a spark guard to prevent the filter, and make possible the shower decontamination. Saturation of the filter is only detectable by an increase in (inhaling) resistance, a motor unit will alarm. In line with: EN12941.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve.Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, plus toxic dust, vapour and smoke particles. Class 1 gas filter: for max. concentration of 0.1%. Sizes: universal. NPF: dependent on the filter used.
Comfortable half-mask made of elastomer, fitted with ergonomically formed head and neck bands for precise adjustment of the mask. With new improved expiration valve. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5%. Sizes: universal. NPF: dependent on the filter used.
ABE2K1HGP filter for motor unit TR-600 and TR-800. Protects against organic and inorganic gases, sulphur dioxide, ammonia, mercury vapour and dust particles. Can be combined with filter cover TR-6500FC.
Polyurethane hose that connects between motor unit, Flowstream regulator, Vortex or Vortemp and hoods from the S and M-series. Length: 525 - 850 mm. Hose adaptable in length. Connection to motor unit, Flowstream, Vortex or Vortemp and hood by means of user-friendly quick- connect coupling.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. Sizes: S, M and L. NPF: dep endent on the filter used.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. In plastic housing for extra protection against spatters.
ABE1 filter in plastic housing for 3M half and full face masks. Protects against inorganic and organic gases and vapours with a boil ing point >65 °C, sulphur dioxide, acidic gases and vapours. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust f ilter holder 501 is used. Class 1 gas filter: for max. concentration of 0.1%.
Lightweight disposable breathing hood with hood made of WEB 24 and visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 100 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
ABEK2 gasfilter in plastic housing for Moldex masks series 7000 and9000. Protects against inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 2 gas filter: for max. concentration of 0.5%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
ABEK1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia and organic ammonia derivatives. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. risks.
Motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-602ETurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt<(> <<)>(><(><<)>)> high capacity battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator and Spark catcher (x2). Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Visor in actetate in order to be able to clean the visor with thinner. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Prefilter as spare spart for motor unit Versaflo TR-300. No PPE.
AP filter for Jupiter motor unit TR-600. Protects against organic gases and dust particles. Can be combined with filter cover TR-6300FC.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Hood with neck and shoulder protection. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light spray painting applications or dusty environments. Weight: 170 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Synthetic wipes, soaked in non-aggressive liquid. Handy wipes for cleaning full and half-face masks. Wipes are individually packaged.
ABEP filter for TR-600 and TR-800 motor unit. Protects against organic and inorganic gases, sulphur dioxide and particulates. Can be combined with filter cover TR-6100FC.
Comfortable half-mask with sealing profile for extra safety and longer life. Fitted with ergonomically formed head and neck bands for precise adjustment of the mask. Large field of view due to placement of filters. Protects against organic gases and vapours with a boiling point >65 °C, plus toxic dust, vapour and smoke particles. Class 2 gas filter: for max. concentration of 0.5 %. NPF: dependent on the filter used.
Haevy duty backpack in flame retardant fabric to carry the motor unit Adflo and Versaflo R-300, TR-600 and TR-800 comfortlaby on the back.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles.
P2 R filter for usage on gas filter Moldex Moldex 9000 series or directly use on 7000 series halfmasks or 9000 series full mask. Protects against harmful dust, mist and smoke particles.
ABEK1P3 plastic filter housing with EasyLock connection for series 7000 and 9000 of Moldex. Protects against organic and inorganic gases and vapors with boiling point> >65 °C, sulfur dioxide, acid gases and vapors, ammonia and organic ammonia derivatives and toxic dust, mist and smoke particles. Filter Class 1: up to max concentration of 0.1%. +A1:2008.
Pre-filter for TR-600. Ensures longer life of main filter.
Air hood with safety helmet with hinged visor made of PC/polyester . Transparent polycarbonate visor provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter or Versaflo motor unit or on compressed air line via Flowstream regulator with air hose. For medium heavy applications. Respiration, face and head protection in one. Weight: 1000g. NPF: 50 with Jupiter, 200 with compressed air, 500 with Versaflo.
Motor unit Versaflo TR-302E+can be combined with hoods of M and S series. With filter cover and air flow indicator. Heavy Duty Battery, charger,length adjustable air hose BT-30, dust filter and pre-filters are included. Can be combined with filters TR-3712E, TR-3802E, TR-3822E and BT- hoses. Motor units eliminate breathing resistance, are suitable for people wearing a beard or glasses, do not care for allergic reactions and often protect better than dust masks because there is a leak from the inside out. This often makes them a good alternative to dust, half and full masks. This motor unit is to be easily cleaned by the flat surfaces. Device with a low flow alarm. Not suitable for confined spaces. Flow: 190L / min. Weight: 1095 with filter, belt and battery. NPF: depending on chosen hood.
Lightweight air hood with inegrated bumpcap. Transparent visor in polycarbonate provides a wide field of vision and allows a lot of light into the hood, which reduces physical strain to a minimum. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or Versaflo TR series or on compressed air line via Flowstream regulator with air hose. Weight: 500g. NPF: 50, with Jupiter and compressed air, NPF: 500 with TR-300, TR-600 and TR-800.
A2 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 2: up to max concentration of 0.5%. processes with chemical risks.
Dust mask, class P3, for toxic dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Inside of mask equipped with comfort pad for better sealing. Equipped with individually adjustable, elastic head bands. NPF: 50.
P filter for TR-600 motor unit. Protects against highly toxic dust, mist and smoke particulates. Clogging of the filter can only be detected through an increase of the (breathing) resistance, motor unit will then sound an alarm.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström half and full face masks and motor units SR500/SR700. It's easy to combine this filter with gaz filters of this range. Clogging of the filter can only be detected through an increase of the (breathing) resistance.
P2 dust filter from 3M for attachment to 3M gas filters when used with dust filter holder 501. Can also be directly attached to 3M half and full face masks when used with filter holder 603 and dust filter holder 501. Protects against harmful dust, mist and smoke particles.
Dust mask, class P2, for harmful dust. Lightweight mask with strong outer layer with exhaust valve. With nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Internal comfort pad for nose. With adjustable, elastic headbands. NPF: 10.
Pre-filter for Sundström filters, if you change the pre-filter dayly, the life span of the P-filter wil be extended up to 10 times.
AXP3 filter in plastic housing for 3M full face masks. Protects against organic gases and vapours with a boiling point <65 °C, plus toxic dust, vapour and smoke particles. Only for use in combination with full face mask, and filter is for one-time use only. Suitab le for: processes involving chemical risks.
ABE1 gasfilter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic and inorganic gases and vapors with boiling point >65°C and sulfur dioxide. Class 1 gas filter: for max. concentration of 0.1%. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
High capacity battery as spare spart for motor unit Versaflo. 10 to 12 hours with new filter. No PPE.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Comfortable half mask in TPE with integrated and replaceable particle filters . Sizes: S/M and M/L.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
A1 filter in plastic housing for 3M half and full face masks. Protects against organic gases and vapours with a boiling point >65 °C . Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust filter holder 501 is used. Class 1 gas filter: for max. conc entration of 0.1%.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Comfortable half mask in TPE with integrated safety goggle and replaceable particle filters . Sizes: S/M and M/L.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%. processes with chemical risks.
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Standard battery for TR-600. Weight 450 grams. Usage duration depends on filters used.
