BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Double Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Double Lanyard to allow continuous pro tection, even when switching between two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate openin g. Serves as connection between anchor point and harness.
Green compressed air hose, 10 m, rubber. Can be used for applications such as making a connection from a compressor to a breathing air filter unit and from filter unit to a belt with a coupler or regulator. Male and female CEJN safety quick-coupling to be supplied separately.
Comfortable, universally usable vented safety helmet, made of polyethylene, with 6-point plastic suspension. With rain channel, Euro pean 30 mm slot for attachment of hearing protection. Available in: white, yellow, blue, red and orange.
Absorbent pads measuring 41 cm x 51 cm. These light-weight perforated absorption pads are packaged in a box. Packaged per 200 pieces . The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ide al for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 166 litres.
Freestanding emergency shower and eye-wash fountain 8300 Axion, fixed connection to the water. The shower is manually operated via the drawbar, the eye-wash fountain with foot pedal or the pressure plate. The receptot of thr eye-wash is in stainless steel, the shower head in ABS. Provision of security icon, and automatic control of water eye-wash fountain. Emergency shower Height: 211 cm. eye-wash fountain Height: 107 cm. Suitable for environments with risk of contamination by hazardous liquids. No PPE
The Stability Plus insole (sizes D and XD) provides optimum support to the heel and middle foot. With mid-foot support for a dropped front foot. Absorbs excessive perspiration moisture and promotes optimal fit due to lateral support for the foot. The antibacterial top layer made of X-Static with silver fibre is moisture and heat regulating. Excess heat is removed, preventing blistering.
Hygiene set for Peltor X2 earmuff.
Baxter safety specs combines the advantages of regular safety specs and goggles. The soft fitting frame gives a better protection on top and below. Elastic headband included. Clear polycarbonate lens with anti-scratch and anti-fog coating.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
High ranger shoe in Hypertex with Putek technology, with a synthetic antiperforation sole and steel toecap. Fitted with a breathable, waterresistant Tepor membrane. Outsole in Vibram, oil and carburant resistant. Has chainsaw protection class 2. Removable, polyurethane insole with textile layer. Sizes: 38-48.
Welding and heat-resistant glove, Fully lined, 1,2-1,4 mm, Split cowhide of top quality, Split cowhide of top quality, Jersey, Cat. II, Yellow, Withstands contact heat up to 100°C, Reinforced seams, Elasticated 180°, for heavy work. EN Compliance: EN 388:2003, 3143 EN 407:2004, 41324X
Functional layer 3 wind- and water repellent jacket. Two breast pockets, left with inner phone pocket. ID-card holder. Two side pockets. Sleeve pocket on left arm. Inner pocket on the left side with handsfree opening. Ventilation zippers under armpits. Extended back. Reflective piping on sleeves and back. Adjustable and detachable hood. Fleece lined collar for better comfort. Adjustable cuffs and waist. Quality: 100% polyester. Available sizes: XS - 4XL. Available colors: Black, white, navy, grey, green, sky blue and red.
Seamless glove with impermeable full nitrile coating all over the hand with extra nitrile foam coating finish on the palm for good grip on wet or oiled components. High-abrasion resistance and anti-impact protection on the back of the hand. Unique Showa ergonomic shape that replicates the natural curve of the human hand. High-visibilty green colour for visible hand signaling. Seamless knitt designed to prevent irritation.No Latex. Sizes: 7(M)-10(XXL)
Low shoe with water resistant full grain leather upper, padded tongue. Ultra light, with a 200J Spacium TM non metallic toe cap and a non metallic Flexium TM anti puncture midsole. Ergonomically shaped, removable inlay, antistatic and antibacterial. Lining in Artico 3D: antibacterial. Outsole in PU/PU with a perfect grip and self-cleaning lug tread. Certified in line with the latest adherence norm. Sizes: 35-49. Convenient for: general industrial applications. In line: EN ISO20345:2004 S3 HI CI SRC ESD
Classic fleece vest with the rich appearance of polyester. This vest has two zip pockets that allow you to store your belongings. Quality: 100% Polyester, 225 g / m². Available colors: Dark gray, black, navy and khaki. Available sizes: XS - 5XL.
Electric Arc hood in softshell fabric with high arc protection. Helmet - Robust helmet with durable shell construction and chin strap. Cooling vents for improved air circulation and comfort. RX0018 - Highly transparent 3Phase® Arc Flash protection lift-front visor. Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 and helmet with chin strap. Available sizes: Universal. Available colours: Navy.
DuPont™ ProShield® 20 SFR. Limited flame spread coverall (index 1) with hood. Stitched external orange seams. Elasticated wrists, ankles, face and waist. Colours: Xhite Sizes: M-3XL. Compliant with: EN 1073-2:2002, EN ISO 13982-1:2004 +A1:2010, EN 13034:2005 + A1:2009, EN 1149-5:2008 and EN ISO 14116:2015.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Flame retardant women's chino pants with stretch. Lots of freedom of movement and high comfort for both sitting and standing work or a mix of these. Non metal. Front pockets. Back pockets with flap. Cargo pocket with flap, telephone pocket, concealed key ring and tool loops. Quality: Cantex Stretch, 365 g/m². Available sizes: 36-48. Available colours: navy. Complies with: EN ISO 11612 A1+A2 B1 C1 E3 F1, EN 1149-5, EN ISO 11611 Class 2 A1+A2, EN 13034 Type PB (6), IEC 61482-2: APC 1, ELIM: 12.0 cal/ cm² ATPV: 18.0 cal/cm².
Hygiene set for Optime III.
Face shield Acetate Antifog for use with face shield holder S89 or helmet face shield holder S54 CE, made of acetate.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 5 dark shade number levels and 3 user selectable levels of detector sensitivity.
Replacement hood for hood S-655.
DuPont™ Tychem® 6000 Shin-length gown with rear closure, knitted cuff with double cuff system, mandarin collar. Stitched and over-taped seams. Available sizes: S/M - 3XL/4XL. Available colours: Gray.
Made from durable polyethylene. Certified according to the latest IMO and SOLAS standards. Diameter 75 cm, Weight 4.5 kg. Cord 30m available (art. 1032349).
Kit for helmet with Contour screen in grey high transparency tint, Contour carrier and chin-guard. Uses nano-particles to protect against mechanical, heat, and radiation risks in the event of arc due to electrical errors.
Automatic welding helmet suitable for most welding applications up to shade 12. This helmet has permanent protection against harmful IR and UV radiation regardless whether the filter is dark or light. This helmet has 3 dark shade number levels and 3 user selectable levels of detector sensitivity.
The JALDRAGSTER JYJY193 from Jallatte is a high-cut safety shoe with innovative anti-fatigue technology, ideal for professionals who stand or work for long hours in demanding environments. Sizes: 35-48 Compliant with: EN ISO 20345:2022
S3S boot: 100% metal-free, specifically for outdoor and construction work, stable and good grip.
Low shoe in microfiber/polyester (made from recycled PET bottles) with synthetic anti-perforation sole with a composite protective toe cap. Equipped with a bamboo and recycled polyester lining that is resistant to abrasion. Sole in PU/PU. Antibacterial Memory Foam sockliner. Sizes: 35-50 Conforms to: EN ISO 20345:2022 S3S CI FO SR.
Cold resistant gloves with a creative combination of high-tech, breathable materials (Hipora) and very high tactility. Lining with 40g of 3M Thinsulate®. The palm also has a double reinforcement. Touch screen-capable thumb fand index fingers. Sizes: S / M / L / XL / XXL.
Welding gloves made of grey nappa leather with protective cuff. The 15 cm protective cuff is also made of quality nappa leather and the fingers have reinforced seams. Available in: grey.
Red First aid pouch with basic first aid equipment for on-the-go. Content: quick bandage 7x10cm, wound quick bandage, adhesive plaster, wound plaster, Cambric bandage, elastic hydrophilic dressing, gauze pads 5/5cm, dressing wadding, splinter tweezers, pocket scissors, disinfectant wipes, safety pins, Burnshield blots. Dimensions: 22 x 14 cm.
Lanyard, 1.5 metre length, consisting of webbing strap with integrated shock absorber. Fitted with two standard carabiners. Serves a s connection between anchor point and harness.
Standard casing for hand wheel valves. Not PPE.
Dual Hook, Carbon Steel blade lasts twice as long as single blade cutters. Unique cardboard piercing shape prevents damage to carton contents. Recessed blade prevents contact with fingers, eliminating costly injuries; High visibility color makes it easy to find in cluttered work environments. Small ridges ensure a secure grip.
Aluminized jacket, the exterior consists of a flexible cloth aluminised, lining is a layer cotton Proban, push-buttons with velcro closure of 5 cm width, ventilation under the arms, high collar in grainleather with velcro closure, 2 covered splits on the sides for better freedom of movement, length 110 cm, length sleeves 80cm. Available in: aluminised soft.
A Cardboard Box safety knife for use in any salesroom. Unique "stay-to- cut / snap-back when done" AUTOMATIC blade retract feature! Let go of the slider when making the cut. With metal handle for use by right- and lefthanders. With ice-chill-hardened 2-edge/4-point blade for maximum savings! No PPE. Blades: 1015780
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Replacement knife for scrapers Argentax and Cleany. Packed per 10 pc. Length: 39mm.
Reusable cold / hot pack. Helps with sprains, muscle tears, bruises and headaches etc. The cold / hot pack cannot be placed directly on the skin when used due to use. Freezing or burning symptoms (use the supplied Velcro bandage for this).
Rebel fall-prevention device with 15 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. The integrated rescue winch can raise or lower a person after a fall. This device can be switched from the fall-protection mode to the rescue mode with a simple movement. Can be attached to a tripod anchor eye or mounted on the leg of the AM100 tripod via adapter.
Raincoat, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams, fixed hood with drawstring, zip under storm flap with press stud fastening, sleeves with press stud fastening, 2 straight pockets. Complies with: EN 343.
Very light sportive low shoe in microporous washable leather and lining in mesh nylon for more comfort. Outsole in very light material EVA, SRA anti-slip. Sizes: 40-46.
Safety scissors 25cm in stainless steel, high quality Easy to clean. Cuts paper and fabric but not the skin Safe round tip. Also suitable for the food industry
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 40,000 volts, operating voltage of 36,000 volts. Length 41 cm, Sizes: 7-12.
Predominantly white cotton cleaning rags with some color mixed in. Box of 10 kg.
Fall-stop device, 2 metre strap, with integrated shock absorber. Polymer casing high resistance. Almost immediately stops any vertical drop motion. Serves as connection between anchor point and harness. Fitted with snap hook with 65 mm gate opening. Usable fallfactor 2. Apporved for horizontal use with 100 kg weight and vertical use 140kg weight.Weight: 1kg.
Flame retardant work jacket with increased visibility in a light and comfortable cloth with high tear resistance. Concealed zipper with press studs front. Extended back. Chest pockets with flap. Sleeve pocket with flap, concealed key ring and loop for ID pocket. Side pockets with flap. Two inner pockets with flap. Phone pocket on the inside. Drawstring at the waist. Adjustable cuffs. Reflection on the shoulders and sleeves. Completely metal-free. Quality: 811 Tera TX, 260 g / m². Available colors: Yellow / navy. Available sizes: XS-4XL. Complies with: EN ISO 11612: A1 + A2 B1 C1 E1 F1, IEC 61482-2: CL.1, EN 1149-5, EN ISO 11611: CL.1 A1 + A2, EN 13034: TYPE PB 6.
Leather glove, Winter-lined, 0,7-0,8 mm, Full grain goatskin, Neoprene, Spandex, Thinsulate™ 100g, Cat. II, Blue, black, white, Reinforced fingers and thumb, Waterproof, Velcro®, for allround work. EN 388:2003, 2111X EN 511:2006, 111
Face shield in clear polycarbonate, length 200 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 9.
This cooling cap keeps your head cool in warm conditions. Fill the cap with a little water, spread the water over the cap, let the excess water run out and ready. The hat cools your head for up to 3 days! Quality: Inuteq Dry Nylon Available sizes: Universal Available colors: Grey
Super strong Midi Parka with Cordura on sleeve and yoke piece for extra wear resistance. The Cordura fabric is made from nylon 6,6 fibers and the general feature is that it is resistant to heavy loads. This jacket is extremely suitable for robust outdoor use. Breathable, wind and waterproof with taped seams. Equipped with a double storm flap with a water barrier, a detachable hood, a concealed press stud fastening and an extended back. Warm and comfortable thanks to the inner collar with fixed microfleece and a removable thermal inner jacket. Practical with a vertical breast pocket with laminated zipper, lockable horizontal and vertical side pockets, concealed horizontal breast pockets and a concealed Napoleon pocket. Equipped with an inner pocket with zipper and ID badge and a cable entry for telephone or MP3 player, beard cap and printer zipper. Available sizes: XS-7XL. Available colors: navy, black, kining blue / navy, black / gray and kakhi / black. In accordance with: EN 343 3.3.
Hat in 100% merino wool. Ideal for work with low to moderate physical effort. Quality: 100% merino wool, 300g / m². Available sizes: universal. Available colors: Black, navy and green.
Comfort for static kneeling situations. Closed-cell foam is non- conductive, resistant to petroleum, and silicone-free. Beveled safety edge, convenient handle. Dimensions: 41 X 71 X 2,5cm. No PPE
New portable fixed life 4-gas detector designed specifically for general workers and users. No live gas readings, and no training needed. When there is a gas alarm, the bell icon on the display will iluminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area. It is maintenance free and has a fixed life of 2 year. Calibration and bump testing is still required. LEL IR sensor is always calibrated on methane.Compatible with Intellidox for Icon or nest when an other Intellidox is in use. CAUTION: The infrared LEL sensor does not measure hydrogen (H2) and acetylene (C2H2).
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/TPU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Compact personal alarm for lone workers and company first responders. The personal alarm can be used to alarm and to receive alarm messages. You can alarm by pressing the emergency button, by pulling the neck cord, via the man down function when there is no movement or lying position and via the timer function. The device has a talk-listen connection so that communication can also be done via speech. The TWIG Neo features GPS/GNSS for outdoor location determination. The personal alarm is often used by company first responders, deposit service technicians and healthcare professionals. The device can be worn around the neck and on the belt. The TWIG Neo comes with belt clip, charger and charging cable.
The X-fit has an innovative ‘X’ recess that makes it easier to remove the earplug after use: the ‘X’ also reduces pressure in the ear canal for improved comfort. Available in a disposable box containing 100 pairs, each pair in a separate recyclable bag.
Glove with double nitrile coating on a very flexible, thin 18 gauge seamless nylon/spandex liner. The fully coated glove prevents penetration of oils (due to the red smooth nitrile coating) and this without loss of grip (due to the black nitrile foam coating). Highest protection against abrasion in combination with short-term protection against contact heat (100°C). In accordance with: EN388:2016: 4.1.2.1.A, EN407:2021: X.1.X.X.X.X.
Polycarbonate replacement visor, for the Iris II.
Lining that fits between cradle and helmet shell for full integration. CE approved to fit all Centurion helmets. No PPE.
Dust mask, class P2, for harmful dust. Ergonomically pre-formed dust mask made of soft filter cloth with nose foam that conforms to the shape of the face. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moisture in the mask. No nose bridge, and no other metal parts. Fitted with adjustable, elastic headbands. 5 years schelf life from date of manufacture.
Durable Multinorm UP work trousers with 2 needle stitched flame retardant retroreflective tape and height-adjustable kneepad pockets. These antistatic work trousers protect its wearer against the risks of electric arcs, heat and metal splashes.
The Jane safety shoe, made from black full-grain leather and suede, is classified as an S3S safety shoe and specially designed to provide the perfect fit for women. This mid-cut model features an aluminium safety toe cap and a FlexGuard® composite penetration-resistant insert, which prevents sharp objects from entering the shoe from below. The rubber outsole offers the right balance of energy return, shock absorption, and stability for an optimal working experience.
Oval snap hook made of steel. Automatic closure of the locking mechanism provides extra safety. Opening: 18 mm. Resistance: 25 kN. W eight: 180g.
Screen carrier made of heat resistant plastic, type S57. Protects against arc flash. Suitable for attachment of face shields s59/s60 3/s605/s613/s615/s760.