BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Disposable coverall in polypropylene SMS with hood and two-way zip with zip flap. Model for general purpose applications. Three-thread overlocked seams and elastic hood, waist, ankles and wrists. Available in white and blue. Type 5-6.
Coverall, 65 gr/m² , microporous film laminate, lightweight, hood, elastic waist wrists and ankles, 3 thread over loch stitch.
Coverall, Tyvek®, breathable, antistatic, limited chemical resistant to water-based products, does not pill, stitched seams at outside, new improved hood with elastic, elastic at wrists (new design) and ankles, zip closure under flap.
Nitrile, liquid-proof gloves with excellent tactility and effective abrasion and puncture resistance. Nitri-Star gloves are flock-lined and silicon-free. Good protection against grease, oil and solvents. Sizes: 7/8/9/10/11/12, length 33 cm.
Comfortable black safety boot made of polyurethane with steel 200J toecap. Fitted with removable, insulating insole and textile interior. Perfect insulation from heat and cold. cold insulation tot -20°C Sizes: 36-48.
Gloves made of soft interlock cotton with nitrile coating. Supple gloves with excellent abrasion resistance and perfect grip on wet and oiled materials. Protects against a wide range of chemical substances, detergents and solvents. Antistatic , silicone free and latex free.
Yellow liquid-tight natural rubber glove, treated to resist bacteria. Length: 30 cm, thickness: 0.35 mm. Recommended for retail, waste management, cleaning services, commercial kitchens, ... Also ideal as a household glove. Old name: Econohands Plus. Sizes: 7-11.
The SR 200 full face mask is made of silicone and is produced in one size that will fit most face sizes. The mask is equipped with three inhalation valves and two exhalation valves, and the breathing resistance is therefore very low. The exhalation valve covers with baffles effectively protect the valves and membranes against dust and paint mist. The design and location of the exhalation valves improve the scope available for communicating. The material and pigments of the mask body are FDA- and BGA approved for exposure to provisions, which minimizes the risk of contact allergies. The easily adjustable elastic head harness of the mask is secured to the visor frame and to the exhalation valves which, together with a large crown plate, contributes towards a comfortable and secure fit. The spherical visor of the mask is made of scratch-resistant polycarbonate, which provides a large field of vision. The mask can be used either as a filtering device in combination with filters from the Sundström range of filters, or as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment. The SR 200 can also be used as head top together with th e Sundström fan unit SR 500 or SR 700. Holder for pre-filter is included. The SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere. Best stored in box SR 344 alternatively storage case SR 339-1 or SR 339-2.
Complete disposable set, for very short work in an environment with asbestos, without direct relation to asbestos dust and without projection of asbestos (maintenance and repairs). It consists of an overall in size XL, a pair of PVC goggles, 1 FFP3 mask, and a pair of green nitrile gloves size 10, 1 waste bag with asbestos marking (90x110cm), a pair of disposable overboots and 1 roll of tape to stick gloves and overboots and thus prevent asbestos from penetrating the suit. WARNING! IN VIEW OF THE STRENGTHENED REGULATIONS OF DECEMBER 2025 REGARDING SIMPLE PROCEDURES AND THE LOWERED ASBESTOS LIMIT, YOU MAY NEED TO USE A FULL-FACE
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. To be combined with half and full-face masks with standard threads or Proflow SC motor unit. Weight: 450 g.
Complete disposable kit, for very short work in an environment with asbestos, not directly related to asbestos dust and no projection of asbestos (maintenance and repairs). It consists of 1 coverall, goggles from PVC, a cup mask, a pair of acrylonitrile green gloves, 2 bags of polyethylene marked asbestos, a pair of boot covers, a protective film roll. WARNING! IN VIEW OF THE STRENGTHENED REGULATIONS OF DECEMBER 2025 REGARDING SIMPLE PROCEDURES AND THE LOWERED ASBESTOS LIMIT, YOU MAY NEED TO USE A FULL-FACE MASK WITH A MOTOR UNIT.
Green boot made out of Acifort. An excellent boot for numerous industrial applications. The shaft has good resistance to fuels, acids and alkalis. the sole is also resistant to oils and fats. Equipped with steel toecap and steel midsole. Antistatic. Sizes: 37-49.
Adhesive tape for masking gloves, boots, and masks on chemical protective clothing, and for additional sealing of zippers. 5 cm x 50 m.
Dust filter protects against all types of particles (highly toxic dust, mist and smoke particles) Can be used in combination with the Sundström motor units SR500/SR500EX/SR700. Cannot be combined with a gas filter.
A waterproof alternative to the traditional leather rigger. Steel toecap and midsole, fully waterproof, fur lined with side tabs for easy donning. CE certified. Protective steel toecap. Steel midsole. Anti-static footwear. Energy absorbing seat region. 100% Waterproof keeping feet warm and dry. SRC - Slip resistant outsole to prevent slips and trips on ceramic and steel surfaces .Fuel and oil resistant outsol . In line with : EN 13832-2:2006 ASTM F2413-11 EN ISO 20345:2011 S5 (CI)
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1235E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatible with 3M filters DT-Series.
This ready-to-use kit includes a PF-602E-ASB Powered Air Respirator, FF-302 Full Face Mask, 2 x Particulate Filter PFR 10 P3 DT-1135E, SS-6600 Pre-Filters with Holder, SC-BT-56-ASB Breathing Tube, PF-653 Filter Port Caps, PF -972 waist belt, PF-972 air flow indicator and PF-641E battery charger.
Kit with SR 700 fan unit and full face mask SR 200. Contains, SR 700 fan unit with PVC belt, SR 200 full face mask with polycarbonate visor and rubber head harness, breathing SR 550 PU hose, standard battery 2.25Ah, battery charger SR 513, flowmeter, 2pcs particle filter SR 710, 1pc particle filter adapter SR 611, SR 367 sealing cover, flowmeter, plugkit, cleaning tissue and user manuals. Packed in a plastic storage box.
Asbestos bags in PP including liner and drawstring. 70x110cm (120L)
Complete chemical resistant air hose with couplings for use with SR500, SR500 EX and SR700 motor units, and full mask SR200.
This ready-to-use kit includes a PF-602E-ASB powered breathing system, FF-602 full face mask, 2 x particulate filter PFR 10 P3 DT-1235E, SS-6600 pre-filters with holder, SC-BT-56-ASB breathing hose, PF-653 filter port caps, PF-972 waist belt, PF-972 air flow indicator and PF-641E battery charger. Compatibler with 3M filters DT series.
Comfortable safety boot made of PVC/Nitrile with steel 200J toecap. Outsole SRC antislip, oil and carburant resistant Sizes: 36-47.
Motor unit can only be combined with dust filters SR510 or SR710 (P3 filters) and air hoods and half and full face masks from Sundström. Flow rate: 175 or 225 L/min. Equipped with visual and audible alarm in case of dust filter saturation or low battery. Includes: motor unit, belt, charger, battery,2 filteradapters, 2x P3 filters, 2 pre-filter holders, 10 pre-filters, flow meter. Battery charging time: 0-80% capacity in 30min. battery autonomy depending on filter and set air flow 4-7 hours. NPF: depending on the cap used.
