BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
P3 RD Elipse replacement filter for usage on Elipse Integra masks. Pack of 10 paires..
Short zip sweatshirt in metal and ribbed cuffs and hem. Two front pockets. Quality: 80% ecological Fairtrade cotton, 20% recycled polyester, 280 g/m². Available sizes: S-4XL.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Plastic ABEK2HgP3 combination filter EN18 standard thread for protection against organic and inorganic gases and vapours, sulphur dioxide and hydrogen chloride, ammonia and organic ammonia derivatives, and particulates.
Welding glass in mineral glass. Dimensions: 51X108mm.
Goatskin welding glove, unlined. Split leather cuff with Kevlar seams. Sizes 7-12. Complies with: EN388:2016 2.1.1.1.X and EN407 4.1.2.X.4.X, EN12477 Type B.
Face shield in clear polycarbonate, length 215 mm. For use on EVO safety helmets. Marking: 1 AT 3 9 KN.
Ergonomically shaped knee protectors with an outer layer of plastic, a foam rubber cushion and a breathable lining. Comfortable mode l with excellent fit! The outer layer is coated with non-slip material and has a high abrasion resistance. With a handy, adjustable closure. Sizes: universal size.
Charger for batteries LI-ON for Adflo motor unit. Batteries must be charged for four hours.
Delineation tape in yellow/black with a length of 100M, with of 80mm.
Signaling waistcoat RWS Carpi: V-neckline; Velcro closure; Back length 70 cm (L). Complies with: EN ISO 20471 class 2.
A simple method for measuring the time-weighted average concentrations of gas- and vapour-phase air contaminants. The monitor must b e attached to the clothing, close to the breathing zone, during the work. The contaminants are absorbed by an active carbon layer. M onitor must be analysed in a laboratory at a later time. Measurement of: organic vapours. Shelf life: 18 months in sealed packaging. Does not produce alarm.
500 mm strap for linkage between dorsal anchorage point and fall-arrest- block. For vertical use only, where the worker requires to attach or detach himself.
Chin piece S91C, suitable for attachment to face shield S910 (150 mm polycarbonate) / S911 (150 mm acetate) / S912 (150 mm acetate a nti-fog).
Absorbent socks measuring 20 cm x 3 m. These heavy-weight socks are packaged in a bag. Packaged per 4 pieces. These socks can be eas ily connected together by means of hooks and rings. The yellow cord inside the sock provides extra solidity when picking it up. They do not absorb water, and they float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, v egetable oils and other water-insoluble chemicals. Absorption capacity: 316 litres.
Standard casing for hand wheel valves. Not PPE.
Hi-vis rain jacket / 100% waterproof / Windproof / Supple / Stretchable / Comfortable / Lightweight / Noiseless / Extended durability / High frequency welded seams / Outside: Fixed hood / Zip closure under flap with press studs / 2 patched pockets / Raglan sleeves / Sleeve narrowing by press studs / Underarm ventilation / Back length 85 cm (L) / Fabric: FLEXOTHANE® Classic: / 100% polyamide knitting with PU coating; ± 180 g / m² Colour: 3720A2FC1: FC1 fluo orange3720A2F01: FY1 fluo yellow
Spark catcher as accessory for motor unit Versaflo. No PPE.
Single-walled storage cabinet for propane gas bottles, model LG.2845 Outdoor storage of pressurised gas cylinders, in accordance with current rules and legislation. Protection against weather. Robust cabinet, made of hot dip galvanised steel for high resistance to corrosion. Perforated design for maximum ventilation. Single door. Lockable against theft and unauthorised access by means of cross-grip handle with cylinder lock. With rear wall, base grille, grille shelf and warning sign. Dimensions W x D x H (mm): External: approx. 840 x 690 x 1500 Internal: approx. 830 x 660 x 1470 Storage Capacity: 4 x 33 kg or 10 x 11 kg or 18 x 5 kg
configuratie op aanvraag/configuration sur demande
Waistpants in durable cotton with a slightly lower grammage for a light weight trouser. Holster pockets with extra compartment and hidden inside pocket with zipper. Pockets on the back with a flap and velcro closure. Folding rule pocket with knifebutton. The knee protection holders can be adjustable in two height levels. Reinforcement in holster pockets, folding rule pocket and on knee protection pockets. Size C42-C64 can be extended by 5 cm. Quality: 100% cotton 320 g/m2. Available Colours: Blue, black, navy, grey and white. Available Sizes: C44-C62, D84-D120, C146-C156.
Fleece jacket in high vis: • spacious front pockets with zip • inside pockets • thumb grip on the cuffs • YKK zipper in the front Quality: 100% polyester. Available sizes: S-4XL. Available colors: Hi-Vis yellow / black and hi-vis orange / black .. In accordance with: EN ISO 20471 class 3.
High shoe in hydrofugated textile, with a synthetic antiperforation sole and steel 200J toecap with TPU scuffcap. Fitted with a Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
Multirisk Softshel Diablo: Invisible zip at the center front; Raglan sleeves; 1 vertical chest pocket; 2 front pockets; 1 inner pocket; 2 slanted reflective bands on the front and back and sleeves; 1 vertical reflective band on each shoulder; Bottom with elastic cord and cord stopper. Quality: 34% MODACRYL, 28% POLYESTER, 21% COTTON, 16% PU, 1% ANTI-STATIC. Conforms to: EN 1149-5: 2008, IEC 61482-2 class 1, EN ISO 14116: 2015 IND 3, EN 13034: 2005 + A1: 2009 TYPE PB [6], EN ISO 11612: 2015 A1 B1 C1 F1, EN ISO 20471: 2013 + A1: 2016 CLASS 2 and EN ISO 11611: 2015 A1 CLASS 1.
Low shoe in waterresistant nubuck leather, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a breathable, abrasion resistant liner in textile Silktane 3D. Outsole in PU/PU extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. ESD approved. Sizes: 35-48.
Flame retardant trousers Barcus with arc protection: Front fly with zip closure; 2 inset pockets with flap; 1 back pocket with flap; 1 patched thigh pocket; 1 gusset pocket; Elasticated waist; Knee pockets; Waistband with loops for belt. Quality: 24% PES + 75% cotton + 1 AST; ± 250 g/m². Available colors: Blue/fluo yellow. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Chemical resistant glove with cut protection for precision and medium duty work with cut risk. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 15gg para-aramid lining. Sizes: 7-12. Complies with: EN388:2016 4.X.4.1.C, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: AJKLMNOPT, EN ISO 374-5:2016 Virus.
Glasses with clear polycarbonate duo-lens, equipped with supravision coating. With clip-in frame. Glasses with adjustable ear springs and soft-flex nose-bridge. Fits the face perfectly. X-tended sideshield for increased side protection. With supravision Excellence coating: Hi-tech coating, scratch-resistant on the outside, free of condensation on the inside, chemically resistant and very easy to clean. Colour frames: blue/charcoal.
Visor in polycarbonate, gold coated and foreseen with adapter for face screen carrier (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from -50°C to +135°C. Dimensions: 500x250x1mm.
Sweatshirt with short zip made of recycled polyester and cotton.
The upper is made of washable microfibre. The closure features an elastic strap under a waterproof flap. The breathable textile lining provides extra comfort. The composite safety toe cap offers protection up to 200 joules. The shoe is equipped with a PU2D sole.
The safety shoe features a fibreglass toe cap and a flexible FAP® midsole. In addition, the shoe offers TPU protection in the heel and toe area, is metal-free and ESD-safe. The upper consists of durable microfibre with breathable Sandwich Mesh, while the lining is made of BreathActive functional lining. The footbed features evercushion® technology. The sole of the shoe, the MOTION PWR, is heat-resistant up to 300°C and has a slip-resistant rubber outsole with a PWR.FOAM midsole for excellent cushioning, energy return and stability.
Absorbent pillows measuring 43 cm x 48 cm. These heavy-weight cushions are packaged in a box. Packaged per 16 pieces. Ideal for the absorption of all industrial liquids, including oils, water, solvents and coolants. Absorbent pillows for regular leaks in the same place. Absorption capacity: 105 litres.
This glove is specially designed to protect against liquid gases at very low temperatures. The Gore-Tex membrane ensures water-tightness. American assembly. The cowhide leather is oil and water repellent and heat resistant. The glove has a 20 cm long cap-cuff and is lined in wool.
Powder-free nitrile gloves for single use. Fingertips with relief. Light blue colour. Lenght 30 cm, thickness 0.11 mm.
Antibacterial addition for tank eyewash stations and tank safety showers. Disinfects and preserves water for up to 6 months, dosing: 10 ml to 100 litres water. Content: 100ml, shelf life : 3 years. No PPE
Low shoe in white A microfibre, with a steel 200J toecap. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer, Sanitized. Sizes: 35-48.
Bicolor t-shirt in 100% cotton, 190 gr/m² single jersey. available sizes: XS-7XL. Available colours: Khaki/Black, White/Darkgrey, Grey/Black, Black/Grey, Darkgrey/Black, Black/Red, Black/Orange, Black/Lime, Navy/Red, Navy/Royalblue, Royalblue/Navy, Navy/Lime. Stockarticle in Darkgrey/Black sizes XS-L
High shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
Sportive spectacles in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. The clear polycarbonate lens is coated with the Supravision Excel coating: High-tech coating, scratch resistant on the outside and easy to clean.
Comfortable gas goggles with large field of vision and frame in PVC. Fits perfectly over prescription glasses, gas-tight. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. With the Supravision Plus coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and outside, antistatic and easy to clean.
Low shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metalfree. Sizes: 35-48.
Fall-stop device with 3.4 metre strap with integrated shock absorber and 2 self-locking hooks. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Suitable for fall factor 2.
Laces, black in polyester. Length: 150cm. No PPE.
Seamless cut resistant glove with double nitrile coating on the full glove. Extremely good grip on wet or oiled components thanks to the double nitrile coating. Cut resistant S-TEX liner (steel/polyester ,nylon). Sizes: 6 (S) - 10 (XXL)
Lightweight / Comfortable and breathable fabric, soft <(>&<)> supple / Inherently flameretardant properties / Very good moisture management properties / Non-allergenic and harmless to the skin / Reinforced seams for an increased durability and longer lifetime / Higher abrasion resistance / dimensionally stable / excellent pilling resistance. Quality: 31% polyester + 28% modacrylic + 20% aramid + 20% viscose FR + 1% AST. Available colors: Hi-Viz orange/navy. Available sizes: SHORT 48 - SHORT 58 - REGULAR 44 - REGULAR 64 - LONG 46 - LONG 56.
Comfortable bump cap made of maintenance friendly and breathable DuPont Teflon polyester, with modern 'casual' baseball cap look. Has a wheel ratchet. Full peak. With woven ventilation opening on top panels. Size: 54-62cm.
Dark grey hearing protector with HiViz green element for attachment to helmet, made of combination of plastic and stainless steel. Very light model with ergonomic design. Delivered standard with an adapter for safety helmets with a 30 mm slot.
Coverall with a focus on safety and comfort. Characteristics include knee pockets, back fold and adjustable cuffs. In addition, there are functional pockets and a hammer loop. Hi-Vis reflective striping on the chest, arms and legs to be clearly visible. Quality: Kingsmill 245g (65% polyester / 35% cotton). Available colors: navy and black. Available sizes: S-4XL.
Shirt with long sleeves. Quality: 68% cotton / 29% polyester / 3% elastane, Pin point Oxford, 110 g / m. Available sizes: XS-7XL. Available colors: Black, royal blue and navy.
100% acrylic beanie soft touch with lapels. Thinsulate ™ lining. Available sizes: Universal. Available colors: Navy, black and gray.
Protective cold storage jacket up to -40 ° C! The inner collar was finished in fleece and the extended back, the narrowed sleeves and the knitted cuffs in the sleeves, which also have a practical thumb hole, help to limit the heat loss. The shoulders are provided with reinforcement to prevent wear and also the elastic narrowing in the back is a comfortable plus of this jacket. Inside: Fixed quilted lining, Knitted cuffs in the sleeves with thumb hole, 1 inner pocket. Exterior: Inner collar in fleece, Fitted with hood (hood available separately), Zipper with flap, 1 patched chest pocket with flap 2 inset pockets with flap, 1 sleeve pocket + pen pocket Rounded-in sleeves, narrowed sleeves by means of Velcro closure Shoulder reinforcement, Elastic narrowing in the back, Extended back and Back length 83 cm (L). Fabric: 100% polyamide; ± 185 g / m² + HV - 100% PES ± 220 g / m² - Hi-vis Cordura: 100% polyester ± 210 g / m². Color: fluo yellow / navy. Compliant with: EN 342.
Arc flash protection for the toughest conditions, will not drip, melt or ignite. Made from durable and comfortable materials. Seamless knitted liner of glass fibre, para-aramid, meta-aramid, nylon and spandex with a smooth finish mixed coating of nitrile, chloroprene. With plastisol prints on the back of the hand for extra protection. Sizes: 6-12.
Anti-fog spray with microfiber wipes. You can use the Artnog 100 times and the anti-fog coating is retained for 20 hours. This can be used on glasses that also have an anti-reflection layer. No PPE.
Low safety shoe in velours leather with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU, including ESD. Antislip SRC and choc resistant.
Softshell vest without sleeves: • two side pockets with zippers; • chest pocket with zipper; • two inside pockets; • hidden button band with chin guard on top; • adjustable waist. Quality: 96% polyester, 4% spandex. Available sizes: XS - 5XL. Available colors: black, navy, dark gray, green, sky blue and red.
High shoe in Putek® Plus textile, with a non metallic antiperforation sole and aluminium 200J toecap. Fitted with a Gore-Tex liner. Outsole in PU/E-TPU Infinergy® extra Rebound, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-48.
This polo shirt has a contemporary fit and is particularly color and shape-retaining. The tailored model with side slits has a 3 button closure and is made of 50% combed cotton and 50% polyester. This polo is available in 13 different colors so you can always adapt your workwear to the corporate identity of your company. Quality: 50% cotton / 50% polyester, Piqué, 180 g / m². Available sizes: XS-3XL.
Low shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Full zip hoodie: • sweater and jacket at the same time • fur on the inside for extra warmth • hood with drawstring • large front pockets • knitted, elastic waistband at the bottom hem • reflective piping on the front and back Quality: 65% cotton, 35% polyester | inner side: 100% polyester, 430 g/m². Available sizes: XS-4XL. Available colors: Black, red, gray and navy.
Low safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Safety helmet made out of ABS with integrated spectacle. Has a 6-point textile cradle (53-64cm). Compatible with (1038817 KINRIEM 4-PUNTS VR EVOLITE/EVO). Available in: white, blue, red, white/smoke, blue/smoke, black/smoke, orange smoke and green/smoke.
Dust mask, class P2, for harmful dust and'unpleasant odours. Lightweight mask with nose foam and nose bridge to adapt mask to the sh ape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistance and low levels of CO2 and moi sture in the mask. Fitted with non-adjustable, elastic headbands. Protection against acidic gases < MAC value thanks to active carbo n layer. NPF: 10.
Interior textile, 6-points with rotating knob. Leather sweatband. Sweatband for Iris II. No PPE.
