BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
The Kingsplit is a new RP glove made of heavy cowsplit leather, with split leather palm reinforcement. The gloves are lined and have a rubber reinforced cuff (10cm), elastic in the back and protection at the knuckles.
High visibility poloshirt in 100% polyester bird eye knitted (175g/m²). Long sleeves, marine collar, 3 button closure, horizontal and vertical reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Comfortable half mask in TPE with integrated safety goggle and replaceable particle filters . Sizes: S/M and M/L.
Safety glasses with a black frame with orange accents. Soft nose bridge and temples. Polycarbonate lenses for UV protection with a anti-fog coating (HydroShield).
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Comfortable bump cap made of maintenance friendly and breathable microfibre, with modern 'casual' baseball cap look with terry towelling sweatband. Micro peak. With woven ventilation openings for better comfort. Protective liner is removable. Size: 53-63cm.
Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.
Low shoe in waterresistant pull-up leather, with a synthetic antiperforation sole and carbon 200J toecap. Fitted with a textile 3D-l ining . Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
High shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Lab coat suitable for ESD environments: UPF 50+ fabric blocks 98% of UV radiation; 3 storage pockets; Phone pocket; Velcro adjustable cuffs for snug fit. Quality: 65% polyester, 34% cotton, 1% AST, 210g / m². Available sizes: XS-3XL. Available color: white, light blue and navy. Conforms to: EN 61340-5-1 (2016) and EN 1149 (2018).
Very comfortable and finger-friendly glove with XLNT™ nitrile coating, combining protection against oil and liquids with a very good grip. Very thin and supple model (18 gauge) has a double coated palm for total liquid protection. It is approved for contact with all types of food and can be used to protect against contact heat up to 100°C (15sec). DMF-free and has the Oeko-Tex label and touchscreen function. Sizes: 7-11. Complies with: EN388:2016 4.1.2.1.X, EN407 X.1.X.X.X.X
High visibility winter parka PW3: 5 pockets for more storage; Insulatex lining to reflect heat back into the body, ensuring maximum warmth and comfort; Removable lined hood; Quick-dry knit cuff; Zipped interior pocket; Zip closures under the armpits; Removable badge holder; The drawstring in the hem allows a snug and comfortable fit; Inside pocket. Quality: Industry 300D: 100% polyester, 300D Oxford weave with a stain resistant finish, 190g PU coating. Available sizes: S-4XL Available colors: fluo yellow / black and orange yellow / black. Complies with: EN ISO 20471 class 3 and EN 343 3: 1.
Insole for female; Available in different heights: Level 1 (wide), Level 2 (standard), Level 3 (small); Very good moisture absorption and release properties; wear-resistant; Suitable for all ESD-compatible safety shoes certified with this insole.
High shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
The Twill Rewear work trousers are comfortable, lightweight and circular work trousers. The work trousers are made of 65% recycled polyester and 35% organic cotton and are available in four cool colours. Available sizes: 42-66. Available colors: navy, black, dark gray and ink
For very strong to extreme soiling involving substances such as paint, resins and adhesives. With gentle solvents and Astopon® (refined walnut shell flour) and nourishing components Content: tube of 250ml PPE Category: not applicable. Previous name: Slig Spezial and Kresto Paint
Dust mask, class P2, for harmful dust, welding fumes, ozone and'unpleasant odours. Mask with nose bridge and seal along the entire e dge to adapt the mask to the shape of the face and reduce leakage to a minimum. Exhalation valve provides lower exhalation resistanc e and low levels of CO2 and moisture in the mask. Mask has rigid cup form for better retention of the shape of the mask. Fitted with adjustable, elastic headbands. Protection against ozone up to 10x MAC value. NPF: 10.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
Visor in green polycarbonate, gold coated. (Screen carrier to buy separately: 1014838 or 1000801). Resistant to high temperatures from - 50°C to +135°C. Dimensions: 500x250x1mm.
These slim fit trousers with cut protection level D at the front: Slim-fit design; thigh pockets; Velcro closure; Double stitched seams; 6 storage pockets. Quality: Outer fabric: 98% Cotton, 2% Elastane 255g Contrast Cloth : 42.5% HPPE, 21.3% Glass, 21.3% PET, 14.9% Nylon Available sizes: S-3XL. Available colours: Black. In accordance with: EN 388 - 1.5.4.2.D.
Discover the JALWIZARD model, assembled in France and equipped with BASF's innovative E-TPU Infinergy® insole. This material provides more than 55% energy recovery during walking and offers an exceptional feeling of comfort thanks to the cushioning of the sole. Insole: For better cushioning. Insert anti-abrasion: Excellent support for the foot in the shoe. Nubuck leather: Hydrophobic, supple and breathable. Lining: High breathability and quick-drying. Infinergy® sole: >55% energy recovery. Benefits: Saves 1 hour of energy per day to stay in shape. Reduces fatigue in people who walk a lot. Offers unrivalled comfort thanks to the cushioned sole. Reduces the risk of TMS in the lower limbs. Sizes: 35-48 PU rise: For increased durability. EN ISO 20345:2022
Jacket in 65% polyester/35% cotton, 245 gr./m² , 2 patched pockets with flap . Industrial washable and dryable. Easy-fit: model with very comfortable cut. Available in: grey with marine blue contrast elements on the pockets, royal blue with marine blue contrast elements on the pockets, marine blue with royal blue contrast elements on the pockets.
Absorbent pads measuring 7.6 cm x 122 cm. These heavy-weight socks are packaged in a box. Packaged per 12 pieces. Ideal for the abso rption of chemicals, acids and bases or universal absorption. The green colour identifies these wipes as chemical waste. The great f lexibility of the socks allows them to be easily placed around machines. Absorption capacity: 45 litres.
Group Lock Box. Simplifies locking of large machines. Once the machine or process is locked, the keys are placed in the lock box. Each authorised team member secures a personal lock to the lock box. Not PPE.
Safety helmet made out of ABS with wheel ratchet, short peak and 6-point cradle out of textile (52-63cm) with a strong absortbant Hydro-Flock sweatband. Has an integrated visor with anti-scratch and anti-fog coating. Colors: white, yellow, blue, red, green, orange, black.
Baseball bumpcap with reduced peak (25mm) and ABS protection. Sizes: 52-65cm.
Easy-to-clean belt for TR-600.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
High shoe in velours leather, with a synthetic antiperforation sole and synthétic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35- 50.
High shoe S3 in black full grain leather with cut resistant lining, fitted with a steel toecap and metallic antiperforation midsole. Breathable textile lining. Outsole in PU/Nitrile, resistant to fats and oils. Fitted with a half scuffcap.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
High shoe in water-repellent suede leather, with a synthetic antiperforation sole and steel 200J toecap. Fitted with a breathable, a brasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 36-48.
Face shield in clear polycarbonate, length 230 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 8 9.
Compact and extremely light safety knife for left-and right-handed persons. Glasfibre reinforced plastic hande and strong blade gives it a remarkable robustness. For cutting single layer cardboard, film and packing tape. The 2 cutting edges are safeley concealed to protect fingers. No replaceble blades available. To order by 10 pieces. No PPE.
High safety shoe in microfiber/textile with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Dust and spatter-proof wall storage box in impact resistant plastic for storage of full-masks in industrial workplaces. Blue model, with pictogram, includes wall mounting hardware. Dimensions: 236 x 315 x 200 mm.
Anatomically shaped, removable insole. This sole is anti-static and is specially designed for long standing postures. It combines an insole with a comfort layer that is in direct contact with the sole of the foot. No PPE.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
Handy wall box in blue made of strong ABS for storage of safety glasses. Dimensions: L23,6 x W12 x H12 cm.
Safety spectacles with wide field of vision and gray polycarbonate lenses, treated with an anti-fog coating. With soft temples and s oft nose bridge with a non-slip effect.
Outer protective lens, extra scratch resistant, for welding helmet 9100. Not separately approved as PPE.
Waipoua Forestry combination with ABS helmet, earmuff and vizor. A flexible and comfortable solution for face and heariong protection in forestry. Convenient for: forestry. In accordance with: EN 397/EN 352-3/EN 1731
Semi-orthopedic inlay sole for women. Excellent schock absorption. Suitable for products of the NOVA productgroup. Sizes: 35-42.
Yellow safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 40-48, 49/50.
Guide 6402 CPN offers a unique combination of maximum protection against needlesticks and cuts while maintaining flexibility and comfort. This model is the latest innnovation with needle and cut protection in the palm area. Kevlar in dark gray for heat resistance and cut protection is used on the back of the hand. Suitable for police and security forces when there are risks of cut, puncture and needle injuries. Great grip and tactile feeling. Sizes: 7-12.
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
Multi-risk coverall with arc flash protection, 6 external pockets and 1 internal pocket, double-stitched reflective FR tape. Made from 79% FR cotton, 20% polyester, and 1% antistatic fibers.
Low shoe in full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. BOA-closing system. Outsole in PU/Nitril (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 39-48.
Safety helmet made out of ABS. Has a 6-point textile cradle (53-64cm). 440Vac approved. Available in: white, yellow, blue.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Dispenser for Spark Plugs for 500 pairs of earplugs. Includes Spark Plug earplugs. Wall holder not included. (Art: 1001186).
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
A versatile antistatic and latex-free glove with superior cut-resistance and mobility. The exclusive Intercept lining of the glove ensures maximum safety and productivity. The glove has optimal fit and flexibility due to the elasticity of the lining and the elasticity of the coating in nitrile foam. This coating has a breathable character to keep the glove comfortable throughout the day. The Hyflex CR is resistant to heat and scattered molten particle and can therefore be used in various work conditions. Suitable for manipulation and assembly applications in metallurgy, the automotive industry (press department, body department and welding department), the glass industry, the plastics sector. Length 240 mm.
Curtain to guide water into 9009 drum during a shower test.
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Kernmantle rope with 11 mm diameter. For use in combination with rope grabs for 11 mm rope. With two loops at the ends and two fixed standard steel carabiner hooks.
Coverall, 65 gsm microporous film laminate, with 55 gsm SMMS polypropylene back panel, covered over by the microporous film laminate. with Hood, elastic waist wrists and ankles, Taped seams. White with orange panel on the back.
Glove made of cut-resistant HDPE material with PU coating. Very finger sensitive. Sizes: 6-11.
First aid box, waterproof and shock resistant, made of ABS synthetic material, specifically designed for ISS. Domino size of 260 x 170 x 88 mm. Suitable for all food services.
Stylish multinorm HI-VIS softshell with hood. Quality: 60% modacrylic, 38% polyester and 2% carbon, 350 gr / m². available sizes: XS-5XL. Available colors: Hi-vis yellow/navy. Compliant with: EN-1149-5, EN ISO 20471 class 2, EN ISO 11612, EN 13034, EN ISO 11611 and IEC 61482.
Comfortable and lightweight slim-fit work trousers for women: - Raised back - Ideal for logistics work - Various storage options - Adjustable in waist Quality: 65% polyester / 35% cotton, 245 g / m². Available sizes: 32-46 NL. Available colors: navy, royal blue, dark gray, black and red.
A light jacket that offers you a very high level of protection, including ARC protection. This hi-vis Kaldvik rain jacket is made out of the new lightweight (280 g/m²) Siopor® Excell fabric. Different linings can be zipped in this soft and supple jacket. Furthermore, the Kaldvik has many practical features like the possibility of attaching a hood (available separately), narrowing the sleeve ends, 1 chest pocket, 2 inside pockets and a practical zipper grip for easily opening and closing the jacket. Available sizes: S-3XL. Avialable colors: Fluo yellow/navy and fluo orange/navy.
Refill can containing 400 pairs of memory foam, conically shaped earplugs for the HL400 dispenser (1048893). The skin friendly earplugs protect against general noise.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a Gore-Tex liner. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Ladies' t-shirt long sleeves in organic cotton with a crew neck, double-stitched ribbed neckline and side seams. Quality: 100% ecological Fairtrade cotton Available sizes: S-2XL.
