BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping cart.
Sportive glasses. Fitted with temple ends and nose with non-slip components. Top choice for working environments with dust exposure. Polycarbonate grey lens which offers a 100% protection against uv- radiation up to 400 nanometers thanks to the filter added to the polycarbonate. Fitted with a Supravision coating. Frame: black/white.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-42.
Strong, ambidextrous blue knitted (13 gauge) gloves made of Intercept Technology® that delivers the highest cut protection level F throughout entire glove and cuff, even after laundering. More durable and stain masking designed for extende use life. Suitable for food processing and services.
ATEX battery for TR-800. Usage duration depends on filters used. Can be charged with standard battery chargers TR-641 and TR-644. No PPE
Flame retardant shirt Rufford with arc protection: Lay-flat collar; Closure with hidden press studs under flap; 2 patched chest pockets with flap closed by concealed press studs; Round sleeves; Sleeve narrowing by press studs; Welded, segmented reflective tape. Quality: 54% modacrylic + 44% cotton + 2% AST; ± 180 g/m ². Available colors: Navy/fluo yellow. Available sizes: S-3XL.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Rainwear set with jacket and pants in PU quality. • Wind and waterproof • Water column: 11,000 mm Quality: 50% Polyester, 50% Polyurethane, 170 g/m² Available sizes: XXS-5XL. Available colours: Black. Complies with: EN 343.
Low shoe in full grain leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU (Wellmaxx), SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Flame retardant and antistatic long johns in 60% modacryll/38% Lyocell /2% polyester. Cool and comfortable material, regulates body temperature, elastic waistband. Available sizes: XS-4XL. Available color: anthracite gray. Conforms to: EN ISO 11612 A1B1C1F1, EN 1149-5, IEC 61482-2 Class 1 (4kA), 6.3 cal/cm².
Hairnet, polypropylene, flap, covers the ears. Available in: White. Diameter: 20-22cm.
Standard Li-ion battery for adflo motor unit from Speed Glass.
Biodegradable single use glove, powder free.
Ultra-light glove 21 gauge for unparalleled comfort and dexterity with very high cut protection (F).
White gloves made of heavy cotton with elastic (tricot) at the wrist. Sensitect gloves have a perfect fit, and are ergonomic and extremely comfortable due to the Interlock quality. Can be worn either as a liner glove or for product protection.
Double Lanyard, 1.8 metre length, consisting of elastic strap with integrated shock absorber. Non-stretched length of the Lanyard is 1.2 metres, which enables better manipulation of the Lanyard. Double Lanyard to allow continuous protection, even when switching be tween two anchor points. Fitted with a standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Industrial mineral absorbent for safe, quick absorption of harmful liquids that have leaked or spilled. The micro-granule in Prosorb works over a large surface area and has a rapid, large absorption capacity. Absorption capacity: 20 kg for 10 kg.
Arm protector, polyethylene, thickness 20 micron, length 40cm. Package containing 100 pieces. Available in: blue. Sizes: universal size. hygiene, transport and distribution sector. No PPE.
Easily adjustable positioning line made of kernmantle rope for useincombination with positioning belt, whether or not to not be integrated into the harness, in order to free the hands for other tasks. Includesaline shortener to adjust the length of the line to the specific work situation. With 2 hooks. Protective sleeve to protect the rope. Available in length: 2, 10, 20 metres.
AB2E1 gasfilter in plastic housing for Moldex masks series 7000 and 9000for protection agains inorganic and organic gases and vapours with aboiling point >65 °C, sulphur dioxide, acidic gases and vapours. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Extra high ranger boot for foundries in full grain leather with 200J steel toecap and anti perforation sole in steel scuffcap in PU. Closure: laces + zip. Fitted with a leather liner, padded tongue and interior insole made out of leather. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Outsole in PU/Nitril with heel, longwearing, with very good slip resistance SRC and oil, fat and acid resistant. Laces: 1035603. Sizes: 39-49.
High shoe in water resistant black full grain leather, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textil. Outsole in Vibram Nitril, SRC antislip, oil and carburant resistant. Also resistant to contact heat up to 300°C. 100% metal free. Removable, polyurethane insole with textile layer. Sizes: 38-47.
Holder with plastic blade, rectangular plastic scraper, to scrape surfaces without damaging them. Single holder supplied without blades. Offer with replacement blades: 1021522 for delicate surfaces
30m floating rope for lifebuoy.
Post and pedestal system to place Skipper unit (1044502/1044611), fits perfectly in any environment. The base can be filled with water or sand for extra stability and sturdiness.
Synthetic glove, Nitrile, 3/4 dipped, Acrylic, Polyester, 10 gg, 13 gg, Sandy finish, Cat. II, Yellow high-viz, black, High-viz colour, Water and oil repellent palm and knuckle, for allround work . EN 388:2003, 4331 EN 511:2006, 02X
Comfortable and sturdy stretch work trousers with reflection details, knee pockets and extra reflection piping. Quality: 65% polyester / 35% cotton. Available sizes: 42-66. Available colors: navy, black, and dark gray.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
High shoe in oiled nubuck leather with a steel toecap and plastic anti-perforation sole. With Smartec lining for good moisture absorption and an ergonomically comfortable insole. Outer sole in PU/PU. Size: 35-42.
The PW40 earmuff with high level attenuation designed to provide basic protection. Super economical, the over the head design provides maximum versatility for use with other PPE. SNR: 28dB In accordance with: EN 352-1
Tunic, polyester / cotton, 195 gr./m², height 80 cm and short sleeves. Available sizes: 0-6. Available colors: navy, wine and zinc.
Multirisk rain trousers with igh level of protection but still light in weight. The Hovi hi-vis trousers are a waterproof rain trousers with ARC protection in a light and improved Siopor® Excell fabric. The 3-layered fabric protects excellently against foul weather, heat, flames, welding sparks and the risks of an electrical flashover. These high-visibility trousers are soft and supple, making them a pleasure to wear in potentially hazardous working environments. Quality: 3-layer fabric: Dobby ripstop polyester fabric (<(>&<)> AST) + breathable FR PU + inherent FR knitting; ± 280 g/m²; 85% FR viscose + 15% para-aramid; ± 125 g/m². Available sizes: S-3XL. Available colours: Fluo orange/navy and fluo yellow/navy.
Seamless knitted HPPE/mineral fibre orange, cut resistant glove. Nitrilfoam coating on palm and fingers, with thouch-screen fonction and reïnforcement with nitrile patch between thumb and forefinger. Very good abrasion resistance and contact heat protection (100°C during 15 seconds). Suitable for handling sharp objects in dry and oily conditions. Sizes: 7-11.
Dust mask, class P3, for toxic dust. Form-retaining mask thanks to Dura- Mesh shell on the outside of the mask. Mask always retains itsshape,even when worn for extended periods or after folding the mask. Exhalation valve provides lower exhalation resistance and low levels ofCO2 and moisture in the mask. Valve faces downward to prevent fogging of glasses. The pleated filter technology reduces breathing resistance to 50%. Non reusable. Fitted with adjustable, elastic headbands with closure. packed per piece. NPF: 50.
Blue fitover safety glasses with pressure-free fit. Very light, fits over most prescription glasses. Frame in synthetic material and clear polycarbonate lenses with integrated side shields. The innovativetempleconcept makes use of Uvex X-stream technology for an excellent, non-slip fit and a wide range of applications. Protects against dust and chemical spatters. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog- free on the inside and easy to clean. applications. PCF (Product Carbon Footprint) = 0,25kg CO².
Fireproof Blanket fiberglass. Size 120 x 120 cm. For fixing the wall, red support. With Dutch/French printed label. Suitable for kitchen fires.
P3 screw-on filter DIN 148 in plastic housing. Protects against toxic dust, mist and smoke particles. For use in combination with half and full face masks with standard threads.
Bomber jacket Calais S503: Waterproof and breathable with taped seams; Fully lined; inner pockets; adjustable cuffs; Ideal for corporate wear and personalization multi pocket; Concealed hood. Quality: 100% polyester pongee PU coated 100g. Available sizes: XS-3XL. Available colors: Black and Navy. Complies with: EN 343 Class 3:1.
Supple latex gloves with rolled cuff to prevent leakage in wet conditions.
Black, nylon bag with reinforced zipper for sports-type glasses.
ABE2K1P2 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, plus dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K f ilter of class 1: for max. concentration of 0.1%.
Comfort facial seal as spare spart of hoods M-106, M-107,M-206, M-207, M-306, M-307. No PPE.
Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
6 refills of Salvequick blue detectable plaster. Each refill contains 35 adhesive plasters: 21 of 72 x 19 mm and 14 of 72 x 25 mm. Suitable for Salvequick dispenser.
Ceinture avec boucle métale en polyester. Adjustable and elastic. length: 120cm. Available colour: black.
A flexible glove with cutting, perforation and needle protection. The Alycore technology on the inside of the hand and over the fingertips protects the palm and fingertips from needles and other sharp objects. Knitted in cut-resistant HDPE fibre, giving the whole glove protection level 5. Provided with PU coating from fingertips to over knuckles and therefore suitable for cleaning or working in wet conditions. Extremely wear-resistant coating. Sizes: 8-11.
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU / TPU, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 35-42.
Lens cleaner spray B412 with aqua formula, Alcohol and Silicone free. Suitable for all types of lenses. Anti-bacteria, anti-static and anti-reflective. 500ml.
High shoe in waterresistant oiled leather, with a non metallic antiperforation sole and 200J toecap. Fitted with a breathable, abrasion resistant liner in Coolmax. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, ergonomic insole. Sizes: 35-49.
High shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Sporty goggles, OTG compatible and very wide panoramic view. Frame colour: anthracite/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. with: EN 166/ EN 170 2C-1.2 1 BT KN CE
Bicolor softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
ESD working glove seamless knitted 15gg, tight fit, with rolled knitted cuff. Touch screen compatible. PU coating on fingertips. Very comfortable. Sizes: 5-11.
Low shoe S3 in synthetic microvelour with 200J synthetic toe cap and synthetic antiperforation sole. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU with strong antislip values and very good shockabsorption. Free of phthalates and silicones, excellent for the automotive industry. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 35- 52.
A warm and durable glove in our Freez range, well suited for cold environment work and freezer. The Guide GTX - Armor reinforcements in palm, fingertips, thumb and indexfinger makes the glove really durable. The elastic at wrist and the lined part towards the knitted cuff prevents cold air from entering the glove. The extra lining on back of hand gives this glove an exellent cold protection. Touchscreen at fingertips back of hand. Size 7-12.
Visor in clear polycarbonate. Heat resistant to temperatures from -50°C to 135°C. Dimensions: 450x220mm. Thickness: 1mm. In line: EN166.
Soft flexible liner offering suppleness and dexterity. Excellent tactile sensitivity with superior comfort. Anatomically engineered, reducing hand fatigue and increasing comfort. Excellent grip performance for safe handling in dry-to-oily applications. Sizes: 7-11. Complies with: EN388:2016 4.1.3.1.X
Boot in full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a SympaTex® liner. Outsole in PU/Vibram®, SR antislip, oil and carburant resistant. Removable, po lyurethane insole with textile layer. 100% metal free. Sizes: 37-48.
High shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole Sizes: D, 36-48 / XD, 39-48.
Natural latex glove, good grip, lined inner, freedom of movement: excellent comfort thanks to the textile inner (seamless work surface), very high tear resistance, very good resistance to various acids and ketones. Applications: Chicken breeding, vegetable cultivation, perfume production, polyester lining, masonry work, and ink and dye production. Length: 31 to 33 cm (depending on size). Thickness: 1.15 mm. Sizes: 5-10.
Comfortable bump cap made of maintenance friendly microfibre, withmodern 'casual' baseball cap look. Reduced peak. With woven ventilationopening along the side. Hat size adjustable from 54 cm to 59 cm.Recommended for workers on industrial assembly lines, for maintenance work in workshops and other locations where an EN397 compliant safety helmet is not required. Colours: yellow, black, navy blue.
High-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 35-48.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Fallline length 1.5 meters, diameter 10.5 mm. Kernmantel line, on both sides a standard carabiner hook.
Vented safety helmet in strong UV resistant ABS with UV indicator. Fitted with a short peak, synthetic sweatband and suspension with wheel adjustment. Helmet with slot for P3E or P3K adapter. Tested: molten splash metal (MM) and low temperature (-30°C).
Duolens glasses with modern fashion-look and extra eyebrow protection. Model fits narrow faces. A slim temple geometry enables a comfortable wearing of earmuffs, helmets and caps. Fitted with temple ends with non- slip components. Clear polycarbonate lens which offers a 100% protection against uv-radiation up to 400 nanometers thanks to the filter added to the polycarbonate. With the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. Frame: grey.
High shoe S3 in black / brown full grain leather with a 200J plastic toecap and plastic anti-perforation sole. Lining in synthetic breathable 3D material. Comfortable insole in coolmax. Sole in PU / TPU. Sizes: 37-47.
2 trauma dressings, 4 no. 1 bandages, 2 no. 2 bandages, 1 no. 3 bandage, 1 cold pack, 5 packs of white cotton wool 10g, 4 rolls of synthetic wadding 10 cm, 16sterile dressing pads 1/16, 10 sterile dressing pads 5 x 5 cm, 10sterile dressing pads 10 x 10 cm, 2 Metaline dressing pads 8 x 10 cm and2 that are 10 x 12 cm, 3 absorbent elastic bandages, 4 Cambric bandages, 3 triangular Calico bandages, 1 roll sticking plaster 2.5 cm, 1 assortment of wound plasters, 1 chlore hexidiine in alcohol, 1 pack wound plaster 6 cm, 1 pair Lister bandage scissors, 1 pair of splinter tweezers, 6 safety pins, 1 pair disposable gloves, 1 Kiss-of-life breathing mask, 1 Burnshield dressing 10 x 10 cm, list of important telephone numbers, list of contents. Content for first aid kit (Art: 1031052).
Belt bag for storing your Martor safety knife. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x60x28mm
