BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Lightweight disposable breathing hood with hood made of PU coated nylon for less pilling and more durability. Visor made of PE. Air channel leads to the visor to prevent it from fogging. Can be used in combination with Jupiter motor unit or with compressed air via Flowstream regulator with air hose. For light applications or dusty environments. Weight: 125 g. NPF: 500 when used with Jupiter motor unit; 200 when used with compressed air. Available in S/M and M/L.
Coverall in PE, laminated, yellow, chemical overall, for limited use.Protects against harmful chemical spatters and sprays. Model with stitched and taped seams, two times zipper under flap, with hood and elastic at the wrists and ankles, Safegard Panel on backside.
Coverall Micromax TS with Tape sealed seams, Elastic face, Elastic wrists and ankles, Storm flap over zipper, Sealed seams, Elasticated hood, waist, cuffs and ankles and "Super B" pattern. Available sizes: S-3XL. Available colours: White.
Talcum powder for electro gloves. Helps when pulling on gloves and absorbs transpiration. No PPE.
Belt bag for storing your Martor safety knife. Made in black nylon with loop, sturdy and wear resistant. Dimensions: 215x60x28mm
Ceinture avec boucle métale en polyester. Adjustable and elastic. length: 120cm. Available colour: black.
30m floating rope for lifebuoy.
Post and pedestal system to place Skipper unit (1044502/1044611), fits perfectly in any environment. The base can be filled with water or sand for extra stability and sturdiness.
Seamless high cut resistant sleeve in HPPE without thumbslot and elastic cuffs on under and upperarm, for wide arms. Lenght 40 cm.
Classic safety glasses with replaceable lenses and soft temples (DCT), adjustable in the length. Protective side shields. Made with mineral glass lenses (HG): high chemical and scratch resistance, very limited mechanical resistance (12m/s).
Seamless knitted glove in yellow high-viz cut resistant ATA® fibres, with double palm and finger coating in nitile Microfinish®. Excellent cutting resistance and good grip in dry, wet and oily condtions. Available in sizes 6, 7, 8, 9, 10 and 11.
- Dexterity and robustness - Cold protection and heat contact resistance - Latex coating on the palm with excellent grip - Respects the natural shape of the hand - 10 gauge - Sizes: 7(S) - 11(XXL) - EN388:2016 3.X.4.2.B - EN511:2006 X.1.X - EN407:2004 X.2.X.X.X.X
Designed to keep the wearer visible, safe and dry in inclement weather. This lightweight stylish two-tone jacket has the following features: buildable hood, large pockets, vent on the yoke at the back and eyelets for extra ventilation. Available sizes: S-3XL. Available colors: hi-vis yellow / navy, hi-vis orange / navy. Conforms to: EN ISO 20471 Class 2, EN 343 3.3.
Compact and extremely light safety knife for left-and right-handed persons. Glasfibre reinforced plastic hande and strong blade gives it a remarkable robustness. For cutting single layer cardboard, film and packing tape. The 2 cutting edges are safeley concealed to protect fingers. No replaceble blades available. To order by 10 pieces. No PPE.
Glove with arc flash protection for the toughest conditions in Cow split leather and goat grain leather. Lined with heat-resistant aramid fibres, which also provide cut protection. The entire outside of the palm is equipped with reinforcements, for extra protection. With safety cuff and double heat-resistant seams. Provides protection against splashes of molten metal, and is also suitable for MIG/MAG welding. Sizes: 7-12. Complies with: EN388:2016 2.X.4.3.B, EN407: 4.1.3.2.4.X, EN12477 Type B, ASTM F2675 Cal.14 ATPV2.
Practical plastic hearing protector with 3 wearing positions (over the head, behind the head, under the chin) with patented technology that dampens the entire frequency range equally so the sounds can be heard softly yet without distortion. Best protection at extremely high noise levels and against low frequency noise from compressors, turbines, engine rooms, etc. The perfect protection for low, medium and high noise levels.
The Twill Rewear work trousers are comfortable, lightweight and circular work trousers. The work trousers are made of 65% recycled polyester and 35% organic cotton and are available in four cool colours. Available sizes: 42-66. Available colors: navy, black, dark gray and ink
Comfortable full face mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. Polycarbonate visor. With adjusta ble head and neck bands for precise adjustment of the mask. Can also be used with S-200 compressed air system. Works with gas filter s 6051, 6055, 6054, 6057, 6059, 6075, 6096, 6098 and 6099. Dust filters 5911, 5925 and 5935 can be mounted on gas filter if dust fil ter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask. NPF: dependent on the filter used. Suitable for: chemical risks. Sizes: S, M and L.
Absorption granules that absorb virtually all aqueous and non-aqueous chemicals. Trivorex not only neutralises acids and bases but a lso oxidants, reductants, etc.
Dispenser for Spark Plugs for 500 pairs of earplugs. Includes Spark Plug earplugs. Wall holder not included. (Art: 1001186).
Biodegradable single use glove, powder free.
High shoe S3 in waterresistant black full grain leather with uvex waterstop technology for protection against splashing water and 200J synthetic toe cap and synthetic antiperforation sole. Innovative uvex bionom x design creates a biomechanical symbiosis between the foot, the upper, the sole and the floor. Lining in breathable synthetic material (mesh), suitable for people allergic to chrome. Sole in PU/PU (i-PUREnrj) with strong antislip values and very good shockabsorption. Free of phthalates and silicones. Removable insole with moisture control system and shockabsorption. Sizes: 10, 11, 12: 38-52.
Gloves with a supple neoprene coating. The knit cotton lining provides excellent perspiration absorption. Good grip in damp conditions. Antistatic Sizes: 8 / 9 / 10, length: 30 cm. Antistatic.
Jacket in 65% polyester/35% cotton, 245 gr./m² , 2 patched pockets with flap . Industrial washable and dryable. Easy-fit: model with very comfortable cut. Available in: grey with marine blue contrast elements on the pockets, royal blue with marine blue contrast elements on the pockets, marine blue with royal blue contrast elements on the pockets.
Universal anti-fog visor (1 mm) made of polycarbonate (resistant to high impact and high temperatures). Shape 1: width 450 mm, height 200 mm. For mounting on Lunar and Monteclipso.
Matching detachable helmethood (hood can be worn over a helmet ) for the parka Sentai. Colour: Navy
Burnshield spray, 125 ml bottle, has cooling effect on burns.
Super lightweight sportive spectacles (21g) in clear polycarbonate. Innovative design where the lens fits directly on the face and also protect the upper cheek and eyebrow. Flexible frame with soft temples (XST). The clear polycarbonate lens is fog-free on the inside and anti scratch on the outside.
Ergonomically shaped kneeprotectors in 100% polyethylene. Very lightweight. To wear with TWO2000(1029448) or TWC2000(1029671). Dimensions: height: 22 cm, width: 17 cm. Available sizes: Universal. Available colours: Black.
2 trauma dressings, 4 no. 1 bandages, 2 no. 2 bandages, 1 no. 3 bandage, 1 cold pack, 5 packs of white cotton wool 10g, 4 rolls of synthetic wadding 10 cm, 16sterile dressing pads 1/16, 10 sterile dressing pads 5 x 5 cm, 10sterile dressing pads 10 x 10 cm, 2 Metaline dressing pads 8 x 10 cm and2 that are 10 x 12 cm, 3 absorbent elastic bandages, 4 Cambric bandages, 3 triangular Calico bandages, 1 roll sticking plaster 2.5 cm, 1 assortment of wound plasters, 1 chlore hexidiine in alcohol, 1 pack wound plaster 6 cm, 1 pair Lister bandage scissors, 1 pair of splinter tweezers, 6 safety pins, 1 pair disposable gloves, 1 Kiss-of-life breathing mask, 1 Burnshield dressing 10 x 10 cm, list of important telephone numbers, list of contents. Content for first aid kit (Art: 1031052).
Rain set, 50% polyamide, 50% polyurethane, 170gr/m², microflex, high frequency welded seams. Jacket: Fixed hood with drawstring, zip under storm flap with popper fastening, adjustable press stud fastening sleeves, 2 straight pockets. Pants: Elastic at the waist, 2 side pockets, adjustable press-stud closure at the bottom of the leg, 3M reflection. Complies with: EN 343, EN ISO 20471 class 2.
High shoe S3 in black full grain leather with cut resistant lining, fitted with a steel toecap and metallic antiperforation midsole. Breathable textile lining. Outsole in PU/Nitrile, resistant to fats and oils. Fitted with a half scuffcap.
Crowd control helmet made of flame-resistant aramid fabric with special selfextinguishing lacquer with Nomex lining and 3-points chinstrap. Has a clear PC visor with anti-fog (inside) and anti-scratch (outside) and PU-Kevlar neck protection. Ideal in combination with HM50 mask. Weight: 1500g.
High shoe in waterresistant black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a Sympatex liner. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-49.
Face shield in clear polycarbonate, length 200 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 9.
Sandal in waterresistant black Cordura micro fibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Comfortable and breathable trousers with ARC protection, soft and supple with good moisture management properties. Not allergenic and harmless to the skin. Reinforced seams for increased durability and longer life. Quality: Sio-Safe Essential: 79% FR cotton + 20% PES + 1% AST; ± 350 g / m². Available colors: corn blue, navy and gray. Available sizes: 48 S - 58 S - 44 R - 64 R - 46 L - 56 L.
Flame retardant boxer short. Quality: Merino RX, 200 g / m². Available colors: Black. Available sizes: XXS-4XL. Compliant with: EN ISO 14116: INDEX 3, EN 1149-5.
Supple, comfortable and chemical resistant gloves made of butyl covered with a layer of Viton with smooth finish. Provides exceptional chemical resistance to toxins, alkalis and acid, esters and ketons, UV rays and ozone, hydrogen peroxide, desinfectant solutions, oxidizing chemicals, non-polar hydrocarbons and aromatics, halogenated hydrocargons, and oils and greases. Gastight and latex free. Lenght: 30cm, Thickness: 0.35mm. Sizes: 7-11.
High safety shoe in microfiber/textile with synthetic antiperforation sole and a steel toe cap. Outsole in PU/TPU (Wellmaxx), including ESD. Antislip SRC and choc resistant.
Low shoe in velours microfiber, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant microfiber liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 38-50.
Sweatband in leather. Suitable for cradles of Peltor helmets. Not separately tested as PPE.
Visor in clear polycarbonate. Heat resistant to temperatures from -50°C to 135°C. Dimensions: 450x220mm. Thickness: 1mm. In line: EN166.
These slim fit trousers with cut protection level D at the front: Slim-fit design; thigh pockets; Velcro closure; Double stitched seams; 6 storage pockets. Quality: Outer fabric: 98% Cotton, 2% Elastane 255g Contrast Cloth : 42.5% HPPE, 21.3% Glass, 21.3% PET, 14.9% Nylon Available sizes: S-3XL. Available colours: Black. In accordance with: EN 388 - 1.5.4.2.D.
Uvex cleaning fluid for cleaning station 9970005. suitable for all uvex safety eyewear. Content: 500 ml.
Bomber jacket Calais S503: Waterproof and breathable with taped seams; Fully lined; inner pockets; adjustable cuffs; Ideal for corporate wear and personalization multi pocket; Concealed hood. Quality: 100% polyester pongee PU coated 100g. Available sizes: XS-3XL. Available colors: Black and Navy. Complies with: EN 343 Class 3:1.
Gloves designed for work in cold working conditions. The combination acrylic/cotton/polyester in the seamless liner combines a light weight with warmth and suppleness. The roughened latex coating increases the resistance to abrasions, cuts, tears and perforation. Sizes: S / M / L / XL.
ABE2K1HgP3 screw-on filter DIN 148 in aluminium housing. Protects against inorganic and organic gases and vapours with a boiling point >65 °C, sulphur dioxide, acidic gases and vapours, ammonia, organic ammonia derivatives, mercury vapours, plus toxic dust, vapour and smoke particles. For use in combination with half and full face masks with standard threads. ABE filter of class 2: for max. concentration of 0.5 %. K filter of class 1: for max. concentration of 0.1%.
This 0.63mm thick knife is very suitable for cutting different materials. The ergonomic support in aluminium makes the knife very stable and is suitable for left and right handed ones. Very handy slider for using the knife while wearing safety gloves! Spare blades: 1024827
Reusable multi-gas detector with shockproof housing Simultaneously detects H2S, CO, O2, and %LEL. Standard with built-in pump, data logging, and event logging. Semi-annual calibration required. Battery life: Approximately 13 hours. Includes rechargeable battery and wall charger. Includes a 1m calibration hose with quick coupling, 3m sampling hose with particulate filter and quick coupling, and a set of spare pump filters (5 particulate filters and 5 hydrophobic filters). Concentration is always visible on the LCD display. STEL/TWA exposure records. With a filtered LEL sensor, calibrated to methane as standard. Alarm values: %LEL 10%-20%, H2S 10-15ppm, O2 19.5%-23.5%, CO 20-100ppm. Compliant with: 89/336/CEE and Ex ia IIC T4. IP class 65/67 and ATEX approved.
High shoe in black nubuck leather, with a steel anti-perforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant Vent-Air liner in textile. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-48.
omfortable sitting harness with two attachment points: on the back and on the chest. Both shoulder and leg bands are adjustable and are padded for extra comfort. Equipped with a D-ring on the abdomen to allow work in seated position or to descend/ascend. This D-ring is not suitable for fall arrest. With sturdy, padded hip belt fitted with two positioning rings to free up hands for other tasks. Leg bands with quick-release buckles. Hip belt equipped with various rings for attachment of tools. Sizes: S/M - L/XL.
Full set ergonomic motor unit for air welding helmets with speed glass. With two dust and/or gas filters. Not for use in closed areas. Set includes a motor unit, standard Li-on battery, charger, air hose, pre-filter, dust filter and flow indicator. Equipped with visual and auditory low flow alarm. Battery life: approx. 8 hours, when used with dust filters. Flow rate: 170-200 l/min. Weight of motor unit: 1.16 kg. NPF: 50.
Baseball bumpcap with reduced peak (25mm) and ABS protection. Sizes: 52-65cm.
Dark blue high shoe S3 in full grain leather with steel toecap and steel antiperforation sole. Lining in Wellness leather (biodegradable material). Sole in TPU with comfortpads in PU and integrated shank. Antibacterial inlay sole, leather laminated. Sizes: D: 39-48.
High capacity battery for TR-600. Weight: 620 grams. Usage duration depends on the filters used.
Laces, black in polyester. Length: 75cm. No PPE.
Comfortable half mask in TPE with integrated safety goggle and replaceable particle filters . Sizes: S/M and M/L.
Low safety shoe in waterrepellant Cordura with synthetic antiperforation sole and a synthetic toe cap. Outsole in PU/PU, including ESD. Has a removable inner schoe. Antislip SRC and choc resistant.
Low shoe in microfiber, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in PU/PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-49.
Yellow safety boot from the Acifort range (Acid+Confort) in PVC/Nitrile rubber fitted with a steel 200J toecap and steel antiperforation midsole. Outsole from PVC/nitrile rubber with tread resistant against dirt. Wear resistant and confortable through the optimum grip. Sizes: 40-48, 49/50.
Welding and heat-resistant glove, Unlined, 0,7-0,8 mm, Full grain goatskin, Full grain goatskin, Reinforced index finger and reinforced seams.
Sporty goggles, OTG compatible and very wide panoramic view. Frame colour: anthracite/blue. Fitted with clear polycarbonate lens: all Uvex PC lenses provide 100% protection against harmful UV radiation up to 400 nanometres (unique in safety – standard in sports), this is achieved by means of the filter material that is added to the (polycarbonate) raw material. Includes the Supravision Excel coating: High-tech coating, scratch resistant on the outside, permanently fog-free on the inside and easy to clean. with: EN 166/ EN 170 2C-1.2 1 BT KN CE
Hi-vis coverall Macas with arc protection: Straight collar; Zip closure under flap with concealed press studs; 2 patched chest pockets with flap; 2 patched slanted pockets with flap; 2 loops for gas detectors; 1 ruler pocket with flap; 1 back pocket with flap; 1 patched thigh pocket with flap; 2 side slits; Sleeve narrowing by press studs; Knee pockets; Flame retardant reflective tape. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Fluo yellow/navy. Certification: IEC 61482-2 : 2009 class 1 - ATPV 9,4 cal/cm², EN ISO 11612 : 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116 : 2015, EN ISO 11611 : 2015 / Class 1 - A1 A2, EN 1149-5 : 2008, EN 13034: Type 6 and EN ISO 20471 : 2013 +A1 2016 / Class 3.
This durable and multifunctional arc coverall features six different pockets on the outside and one on the inside. This model with d ouble-stitched reflective FR strips is made from a very light fabric weighing only 260 g/m². At the same time, the fabric is very breathable and supple, flame-retardant, anti-static and offers you excellent protections against heat and metal splashes. For extra comfort and a good fit the waist can be adjusted, the sleeves can be narrowed by using press studs and knee protection can be pushed into the knee pockets. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g/m². Available colors: Navy. Available sizes: 44-64.
The ideal solution to mitigate static buildup when working with chemicals and liquids in environments with static hazards or high ex plosive risks. High performance Nitrile compound offers a far superior snag, puncture and abrasion protection. Reverse lozenge palm finisch for improved dry and wet grip. Foldable cuff gutter to prevent dripping on the forearm. Antistatic flocking layer for ease of donning/doffing and moisture management. Without Silicone. Sizes: 7-11.
Long Sleeve Polo 502.42: neck tape Rib knit collar Button closure with 2 buttons side seams Washable up to 40°C Quality: 100% cotton.
Comfortable white nylon liner combined with a tough nitrile coating featuring Ansell Grip Technology that reduces the amount of force needed to get a firm grip on oily objects. Provides high protection against bases, oils and some types of solvents and greases.
Protective foil for visor of 3M full face masks 6700S, 6800S and 6900S. Protects the visor against scratches and liquids. Suitable f or: processes involving chemical risks.
Automatic welding cassette with three automatically darkening welding filters. Width of welding filter: 54x107mm. Battery life: 2500 hours.
