BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
High quality cow grain leather glove (beige) with pistol reinforcement on the palm in cow split leather. If you need a solid glove with very good grip, this is the ideal solution! The glove is fully lined with a very comfortable cotton lining and has an extra long rubberized cuff of 10 cm for better protection of the forearm. The glove reaches outstanding mechanical results and is available in a lot of sizes. Sizes available: 8-12. The gloves are designed to use in the construction sector, transport and distribution. Conform: EN388: 4.2.4.4
High shoe in grey water resistant full grain leather, with a non-metallic anti-perforation sole and a steel 200J toecap. Featuring a breathable, abrasion resistant lining in textile. Sole in PU / TPU, SRC anti-slip, resistant to oils and acids. Removable insole in polyurethane with textile layer. Sizes: 35-42.
High shoe in microfiber, with a synthetic antiperforation sole and metal 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
Atex motor unit to be combined with all hoods from the S and M series. Motor units eliminate breathing resistance, are suitable for wearers with facial hair or glasses, are hypo-allergenic and often provided better protection as there is a small amount of outward leakage from within the mask. This makes these masks a very good alternative to dust masks and half-face and full-face masks. This motor unit is easy to clean due to flat surfaces. Uses both dust and/or gas filters. Equipped with a low flow alarm. Not for use in closed areas. Kit contains the TR-802E AtexTurbo Unit, A2P filter, filter cover, pre-filters (x10), easy-Clean belt, high capacity Atex battery, 1-stations battery charging kit, BT-30 breathing tube which adapts according to the length, air current (flow) indicator. Flow rate: 170-220 L/min. Weight: 1560 without accessories. NPF: dependent on the mask used.
Low shoe in waterresistant micro fibre, with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted w ith a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 35-48.
Refill can containing 400 pairs of memory foam, conically shaped earplugs for the HL400 dispenser (1048893). The skin friendly earplugs protect against general noise.
Electrical Insulating Gloves made from 100% natural rubber latex using a proprietary environmentally friendly dipping process for ultimate flexibility and dexterity. Their ergonomic hand-at-rest shape and non-splayed fingers reduce hand fatigue. The generous flared beaded cuff allows room for clothing The design also features a smooth-finish for easy donning and doffing.Sizes: 8-11. Thickness: 2,3mm, Lenght: 360mm Certified category R/C. ATPV/ 14 cal/cm²
Low-cut, light, metal-free, perforated safety shoe in microvelours with a sporty look and synthetic 200J toecap. With Uvex Climatec lining. Comfortable, removable insole with anti-microbial treatment. The outsole is made of PU/PU (i-PUREnrj). ESD approved. Sizes: 35-52. Widths: 10, 11, 12 and 14.
Earmuff for helmet, used with V-GARD helmets. SNR: 36dB.
Low shoe in microfiber, with a synthetic 200J toecap (amagnetic). Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-52 (widths: 10, 11, 12).
Low shoe in nubuck leather, with a non metallic antiperforation sole and steel 200J toecap. Fitted with a breathable, abrasion resistant liner in leather. Outsole in MONO-PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 39-49.
Dust mask, class P1, for irritating dust. Lightweight mask with nose foam and nose bridge to adapt mask to the shape of the face and reduce leakage to a minimum. Fitted with non-adjustable, elastic headbands. NPF: 4.
Lanyard, 2 metre length, consisting of elastic strap with integrated shock absorber. Fitted with one standard carabiner and one with big opening. Maximum user weight: 140kg
Leather boot, with 2 loops to help pull boot on. GORE-TEX lining. The Softane 2-component sole allows for better slip resistance and is resistant to oil and hydrocarbon contact. This shoe offers great shock absorption. With a protective toecap in synthetic polymer, which makes the shoe lighter and a stainless steel anti-perforation insole. Sizes: 37-48.
The PROTAC amplifies all the ambient noise to a level that allows you to hear it better. It allows you to hear better and protects you during those moments when protection is necessary. Ideal for automatically blocking peak noise above 82 dB. Allows you to continue communicating normally. Settings are stored when removed. Automatic shut-down in the event of non-activity for 2 hours.
Adaptor 3711VS for helmets with Centurion Connect slot.
High shoe in high quality waterresistant full grain leather with a Air Toe aluminium toecap and non metalic antiperforation outsole Safe & Flex Zero+. Outsole in PU/PU with perfect grip and selfcleaning trace, lightweight, oilresistant and antistatic. Energy absorbing heelpart. Liner in 3D material, with moisture regulating cell structure. Removable and ergonomicaly formed insole in foam with memory effect, made from Elastopan by BASF. Sizes: 35-48.
Low shoe in microfiber/cordura, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Made partly from recycled content; in lining, laces, insole and protected midsole. Sizes: D, 36-48 / XD, 39-48.
Cap glove with wrinkled rubber coating on an interlock liner, 31 cm long. Provides good cutting resistance and has a very good grip on dry and wet or smooth surfaces. Ideal for work with glass, roof tiles, ceramic, tin plates, smooth plastic, ... Sizes: 7-10.
High-cut safety shoe S2 made of nubuck leather, with 200J steel toecap. Fitted with Smartec Air Sanitized lining: antibacterial and anti-odour. Entire insole: antibacterial, moisture absorbent, breathable, washable and antistatic. Padded water tongue. Supple, lightweight dual density PU/PU sole with heel profile, high wear resistance, antistatic, non- slip, resistant to oil, petrol and acid, high shock absorbency. Sizes: 35-48.
T-shirt, 100% pre-shrunk ring spun cotton, 145 gr./m², single jersey, long sleeves, round collar. Available in: white, black, navy, red, naturel, royal blue, bottle green, ash grey, sport grey, dark grey.
High visibility poloshirt in 100% polyester bird eye knitted (175g/m²). Long sleeves, marine collar, 3 button closure, horizontal and vertical reflective striping. Available sizes: S-3XL. Available colours: hi-vis yellow/navy, hi-vis orange/navy.
Low shoe in microfiber, with a synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. 100% metalfree. Removable, polyurethane insole with textile layer. Sizes: 35-48.
The ‘industry’ body warmer has a ‘fake fur’ lining . The body warmer offers extra visibility thanks to reflective piping on the front- and backside. De coating ensures rejection of dirt and water. The body warmer offer sufficient storage thanks to the chest pocket, two side pockets, two lockable flap pockets and a lockable horizontal side pocket. The bodywarmer is for 70% made of polyester and 30% of cotton. And has the 250g/M2 quality. The body warmer is available in navy and black in sizes XS-7XL.
Comfortable half mask in TPE with integrated and replaceable particle filters . Sizes: S/M and M/L.
Waistpants with great flexibility. Stretch fabric across seat, crotch and knees area to provide extra freedom of movement. Leg pockets with zipper. Back pockets with flap. Attachment for holster pockets. Hidden button at front. By unpicking the red stitching at the hem the trousers can be lengthened by 5 cm. Quality: 65% polyester, 35% cotton, 245 g/m². Available colors: red, sky blue, navy, green, beige, gray and black. Available sizes: C32-C50.
Very light safety spectacles with polycarbonate lenses. 3M ™ Pressure Diffusion Temple Technology that helps distribute pressure across the ears to improve frame comfort for a firm and comfortable fit. The 3M ™ Scotchgard ™ Anti-Fog Coating offers superior anti-fog and scratch-resistant properties.
Anti-fog spray with microfiber wipes. You can use the Artnog 100 times and the anti-fog coating is retained for 20 hours. This can be used on glasses that also have an anti-reflection layer. No PPE.
Sweatshirt with: double hood with drawstring set-in sleeves rib knitted cuffs and hem with elastane stuffed kangaroo bag fashionable model knitted. Quality: 80% cotton, 20% polyester. Available sizes: XS-5XL Available colors: Black and navy.
High shoe in mesh/nubuck leather with a synthetic antiperforation sole. Fitted with a mesh and textile liner. EVA/rubber outsole with scuffcap, SRC antislip, oil and carburant resistant. Removable, antibacterial polyurethane insole with textile layer. Sizes: 36-50.
Microflex Flame-retardant Hi-Vis rain trousers • Elasticated waist • High-frequency welded seams • Adjustable snap closure at the bottom of the legs • With RWS reflection • Wind and waterproof • Water column: 11 ,000 mm. Quality: 50% polyester / 50% polyurethane, 210 g / m². Available sizes: S-5XL. Available colors: Fluo yellow and fluo orange. Compliant with: EN ISO 14116 index 1, EN ISO 20471 class 2, EN1149-5, EN343.
Your ear defenders are always close to hand with the neck cord. The clothing clip reduces the chance of losing your ear defenders. C omfortable due to soft silicone material. Safe because the cord is released from the ear defenders if it catches on something. Easy to attach and remove from your ear defenders.
• 18 gauge gray Kyorene® Pro graphene liner • Black HCT®-Nitrile Nanofoam coating on the palm •Reinforced thumb hole • Touch screen • No stainless steel or fiberglass • Ergonomically shaped for a superior fit • Bacteriostatic kills harmful bacteria • Heat regulation keeps hands comfortable • Odor neutralization so that the gloves stay smelling fresh Conforms to: EN388:2016:4X42D
High shoe in waterresistant full grain leather with synthetic 200J toecap and synthetic antiperforation sole. Foreseen of a soft inlay sole with membrane in GoreTex. Sole in PU/Nitril. Sizes: 39-48.
Super-light (300 g) safety helmet with short peak, made of strong ABS. With 6-point textile suspension (1000276) (51-63 cm), highly absorbent hydro-flock sweatband (1000299) and standard 4-point chin strap (1034406). Specially designed to prevent injury if helmet becomes trapped during a fall: chin strap opens automatically. With extended neck protection without ventilation. With convenient surface for personalisation. With European 30 mm Connect slot for attachment of hearing and face protection.
Gloves for all lengthy work activities involving chemicals, heat or cold. Neoprene on a double cotton liner. Temp-Tec 332 can be used for the manipulation of oiled, hot parts up to 250 °C. Available in: blue/black. Sizes: 8 / 9 / 10, length: 35.5 cm.
Black, nylon bag with reinforced zipper for sports-type glasses.
Handy wall box in blue made of strong ABS for storage of safety glasses. Dimensions: L23,6 x W12 x H12 cm.
Glove made of green grain leather and aramid thread for protection from cut wounds. With 2-hand protection against chain saws.
Curtain to guide water into 9009 drum during a shower test.
A1 filter in plastic housing for Moldex masks series 7000 and 9000. Protects against organic vapors and gases with boiling point >65 ° C. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder. Filter Class 1: up to max concentration of 0.1%.
AX gasfilter in plastic housing for Moldex masks series 7000 and 9000 forprotection against organic gasses with boiling point <65°C. For single usage. Filters 9010, 9020 and 9030 can be mounted on gas filter without filter holder.
Earmuffs X5 with headband in stainless steel, covered with a soft plastic for extra comfort and electrical insulation. Wide headband for good balance, with an aperture for extra ventilation. Double-Cast (TPU/ABS) housing with details in bright colours for increased visibility. New damping pads increased damping, and 'spacers': an extra seal ring that reduces resonance. Adjusted easily using 'grip areas' on the top and bottom, durable, ergonomic and very light in relation to a noise-reduction. Can be combined with 3M respiratory and eye protection. SNR: 37dB.
Firefighter boot in black water and firerepellant leather, with a synthetic antiperforation sole and composite 200J toecap. Reflectors on bothsides, AN ankle protection in rubber. Fitted with a liner in Gore-Tex. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on both sides in leather. Specially designed BOA closing system. Sizes: 38- 48.
Safety glasses Silium+ is a comfortable and ultra lightweight polycarbonate model for extended wear. Anti-sratch and anti-fog CSP- coating (Platinum): This innovating coating is an effective solution for all activities that alternate exposure to bright light and low light, while also being suitable for extreme hot and cold temperature environments. Resistance to surface damage by fine particles and UV- radiation.
Flameretardant sleeveless fleece lining in 100% FR polyester (+- 275g/m²). Round collar, zipper, slitopening to inside pocket of rain jacket, stitched seams, can not be worn seperately. Available sizes: S- 3XL. Available colours: Navy.
Waipoua Forestry combination with ABS helmet, earmuff and vizor. A flexible and comfortable solution for face and heariong protection in forestry. Convenient for: forestry. In accordance with: EN 397/EN 352-3/EN 1731
Face shield in clear polycarbonate, length 230 mm. For use in combination with helmet holder S55 (1040204) for mounting on Centurion safety helmets. Marking: 1 BT 3 8 9.
Seemless knitted nylon/spandex gloves (18 gauge) with foamy insulating layer nitrile on the palm. Ultra-thin ergonomic design provides extreme tactility to handle small parts easily. It is dermatologically tested and solvent-free and is Oekotex certified for no harmfull substances. Fortix™ Technology delivers extended wear time. They are particularly suitable for light assembly applications in industries such as automotive, plastics, textiles and finished products, and for the needs of logistics and warehousing. Sizes: 6-11.
The PW40 earmuff with high level attenuation designed to provide basic protection. Super economical, the over the head design provides maximum versatility for use with other PPE. SNR: 28dB In accordance with: EN 352-1
Suspension I/79GD-R with linen bands for improved comfort. Suspension is plastic and textile, sweatband is cowhide leather. Sweatband extends around full perimeter. Sizes: 53-61 cm. For helmets of type Ben and Bop. Not separately certified as PPE.
Multinorm T-shirt Diablo: - Long Sleeves; - V-collar in contrast; - Raglan sleeves; - 2 angled bevel ref tires. Quality: 63% FR VISCOSE -32% NOMEX - 5% ELASTANE. Available sizes: XS-3XL. Available colors: Fluo yellow / gray. Conforms to: EN ISO 20471 Class 2, EN ISO 11612 A1B1C1F1, EN ISO 14116 and EN 1149-5.
Bicolor softshell jacket with detachable hood. Contrasting zipper on the front and on the side pockets. Adjustable sleeves with velcro closure. Drawstrings at the hood and at the bottom hem. Tear-out neck label and separately woven size label. A pocket was provided on the inside of the left side seam for sewing in a washing chip. Zipper pullers in contrast color. Oeko-Tex 100 certified. Quality: 100% recycled polyester, 280 g/m². Available sizes: S-5XL. Available colors: Blue/Navy, Navy/Blue, Black/Grey, Black/Red, Black/Orange and Gray/Black.
Flexible, tight-fitting work glove manufactured in Guide HXFIBR™, a material that provides groundbreaking cut protection and excellent tactile sensitivity. The glove’s PU coating provides good grip. 15 gg liner and additional reinforcement along thumb and forefinger. Cut protection level D, approved for contact heat up to 100°C (15 sec), ESD and Touchscreen compatible. Sizes: 6-12.
High shoe in waterresistant oiled leather, with a steel antiperforation sole and composite 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Safety glasses with transparent frame with flexible anti-slip arms and adjustable anti-slip nose-bridge. Polycarbonate lenses with an anti-scratch and anti-vapour layer. With platinum coating: This treatment ensures even more safety, reliability and comfort. The p ermanent coating on both sides of the glass provides high resistance to scratches (1.4 cd/m²) and the most harmful chemical products and inhibits vapour formation by more than 2 minutes. Not supplied with glasses cord (can be ordered separately: 1034594).
Low shoe in Safety Knit® textile. Provided with a synthetic 200J toe cap and a synthetic antiperforation sole. TPU-protection elements in the area of the front cap and the heel provide abrasion protection, especially during kneeling work. BreathActive lining. Outsole in PU/Nitrile, resistant to 300 ° C. Removable, polyurethane insole with textile layer. Sizes: 39-47.
• crew neck sweater; • ribbed collar, cuffs and bottom hem. Quality: 100% cotton, 280 g/m². Available sizes: XS-4XL. Colors available: Navy, Gray and Black.
Overboots, Tychem F, antistatic, non-slip soles, elastic and bindingaround the leg. Available in: grey.
Terylene suspension for Concept helmet with slip adjustment.
Comfortable half mask in hypo-allergenic rubber with silicone rubber seal, semi-maintainable. With adjustable head and neck bands fo r precise adjustment of the mask. Can also be used with S-200 compressed air system. Can be used with gas filters 6051, 6055, 6054, 6057, 6059, 6075 and 6096/ filters 6098 and 6099 only with full face mask. Dust filters 5911, 5925 and 5935 can be mounted on gas fi lter if dust filter holder 501 is used. Dust filters 2125, 2135, 2138 and 6035 fit directly on the mask.
P3 dust filter from 3M for direct connection to 3M half and full face masks. Protects against toxic dust, mist and smoke particles. Also protects against irritating concentrations of organic vapours and acidic gases. May not be considered a gas filter! Suitable fo r: processes involving chemical risks.
SP65 Axion eye and face wash system with adaptor for models 7260BT Axion, 7261 Axion, 7460BT Axion and 7461 Axion. Conform: EN15154.
Black waders in PVC, fitted with a steel 200J toecap and steelantiperforation midsole. Outsole from PVC Strong boot because of the firm soles and wear-resistant profiles. Good price/quality ratio. Waders in PVC, 100% waterproof. Sizes: 39-47.
Low shoe in high quality waterresistant bovin leather with an Air Toe aluminium toecap and non metalic antiperforation outsole Safe & Flex Zero+. Outsole in PU/PU with perfect grip and selfcleaning traces, lightweight, oiliresistant and antistatic. Energy absorbing heelpart. Liner in 3D material, with moisture regulating cell structure. Removable and ergonomicaly formed insole in foam with memory effect, made out of Elastopan by BASF. Sizes: 35-48.
Carry bag for full face mask 3S. With handy shoulder strap. Ideal for dust-free storage of full face mask and filter. Dimensions: 295mm x 200mm x 295mm.
