BE - +32 3 820 98 60 info@vdp.com
There are no products in your shopping basket.
Fire extinguisher. Fire action sign in self-adhesive polyester. Dimensions: 200x200mm.
Smoking prohibited. Prohibition sign in self-adhesive polyester. Diameter: 200mm.
Mask made of very comfortable, high-quality rubber. Antifog visor made of polycarbonate with silicate coating, provides very wide field of vision (95 %). Speech is conveyed via the speech membrane, which provides clear speech transmission. Speech membrane is positioned so the filter is not in front of it. The exhalation valve is located at the lowest point of the mask and has a large diameter, which results in low exhalation resistance. The headband is easily adjustable, with carry strap for hanging the mask around the neck. Fitted with standard EN 148 threaded connection for filters or air hoses with matching coupling. Also available order in size small or in silicone rubber.
AXP3 screw-on filter DIN 148 in aluminium housing. Protects against organic gases and vapours with a boiling point lower then 65 °C, plus toxic dust, vapour and smoke particles. For use in combination with full face masks with standard threads. Filter for one-time use only. Class 2 gas filter: for max. concentration of 0.5 %.
Bottle of 58 liters with 4 test gases for calibration of 4-gas detectors. To use to calibrate manually or to combine with the Micro Dock II. Always use a shutter. Content: CH4 (2.2%), O2 (18%), H2S (25PPM) and CO (100PPM).
Low shoe Traxx 203 S3 in black nubuck leather with TPU scuff cap. Fitted with a 200J steel toecap and antiperforation sole. Liner in splitleather Cool Comfort, with PU/TPU outsole. Inlay in PU with textile layer.
Polo, 60% modacrylic 39% cotton 1% carbon, 200gr./m², flam retardant, antistatic, long sleeve, 3 button placket. Available in: navy, black and grey.
Toughstripe floor marking in strong and easy to apply polyester. Ideal for use with forklifts. Does not loosen and is not damaged due to scuffing by pallets. Available in different colours and sizes. Not PPE.
Fall-prevention device, 15 metre galvanised steel cable, with integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. For vertical use. Weight: 7 kg.
Earmuff for helmet X5 with double-cast (TPU/ABS) housing with details in bright colours for a increased visibility. New noise reduction pads for better noise reduction, and 'spacers': an extra seal ring which reduces resonance. Easily adjusted using 'grip areas' on the top and bottom, durable, ergonomic and very light for high noise reduction. Can be combined with 3M respiratory and eye protection. SNR: 36dB.
Low shoe in black full grain leather, with a synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant liner in 3D textile. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-48.
Every day in many industries, people are sustaining hand and finger injuries that are preventable. Using the correct safety devise should be an essential part of everyday life. If you are working in areas where objects could hit you on the head, you would wear a hard hat. If your eyes are at risk from foreign objects or wind blown particles, you would wear safety glasses. Think about your hands in the same way! Be sure to keep them safe and out of harms way, be sure to use the Fingersaver, don’t take risks with you hands.
Double safety line, 1.5 metre length, consisting of kernmantle rope with integrated shock absorber. Safety line tested according to sharp side test and thus extremely reliable for use near sharp edges. Double safety line to allow continuous protection, even when switching between two anchor points. Fitted with one standard carabiner and two snap hooks with a 65 mm gate opening. Serves as connection between anchor point and harness.
Robust environmental cabinet for the storage of substances dangerous for the environment. Ideal for the storage of oils and fats or in a green version for the storage of pesticides. In accordance with ARAB/Codex well-being at work, Vlarem and PGS15 (The Netherlands) Robust construction made of galvanized electrostatic treated sheet steel. Finished with a thermal-applied epoxy coating (average thickness 90 µm) with a high chemical resistance, colour: grey RAL 7035. Turning doors in hinges bearings. Integrated ' Ergo-Lock ' handle (3 point lock) in black with 2 keys. Doors with top and bottom 1 grid hole for a good natural ventilation. Equipped with galvanized steel kuipleg signs. Trays approved according to WHG 19. Load capacity 80 kg (evenly distributed load trays) Trays adjustable height. Security icons of your choice eg. ' toxins ' Dimensions: 950 X 500 X 1950 mm Weight: 76 kg
The self-adhesive surface of the plaster is exposed when a plaster is removed from the dispenser. This makes it easier to apply. Content: 40 self-adhesive fabric plasters and 45 self-adhesive plastic plasters. The refills are stored in the dispenser and can only be removed through use of the special red key. Available per piecel: 1021794.
Low shoe in white A microfibre, with a steel 200J toecap. Outsole in PU/TPU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer, Sanitized. Sizes: 35-48.
Content for first aid kit Orange Cross (Art: 1031051). Contents for Oranje Kruiskoffer Q50NL: Quick Safe kiss breathing tissue 1 piece Quick disinfectant 30 ml 1 piece Quick triangular cloth cotton 2 pieces, Quick vinyl gloves per pair packed 2 pieces Quick adhesive plaster 2.50 cm x 5 m First aid 1 roll Quick gaze 10 x 10 cm each 4 pieces Quick gauzes 1/16 per piece 4 pieces Quick splinter tweezers Stainless steel drum 8 cm 1 piece Quick rescue blanket gold / silver 1 piece Quick wound bandage EU 10 x 12 cm 4 pieces Quick drawing tweezers plastic 1 piece Quick bandage self-adhesive 8 cm x 4 m 2 pieces Quick adhesive strips 3 mm x 75 mm a 5 pieces 2 pieces Quick lister belt scissors 14 cm stainless steel drum 1 piece Quick synthetic cotton wool 3 m x 10 cm 3 roll Quick elastic hydrophilic 6 cm x 4 m 2 pieces Sanap wound plaster 100 x 6 cm 1 bag Quick assortment wound plaster Quick a 30 pieces 1 bag Quick wound fastener 6 x 8 cm flat model 3 pieces Quick metaline compress 10 x 12 cm 5 pieces Quick ideal 8 cm x 5 m 3 pieces
Low shoe in waterresistant full grain leather, with an synthetic antiperforation sole and synthetic 200J toecap. Fitted with a breathable, abrasion resistant 3D liner. Outsole in PU/PU, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. 100% metal free. Sizes: 35-42.
Rebel fall-prevention device with 6 metre galvanised steel cable, and integrated shock absorber. Housing made of plastic. Stops all vertical falling movements almost immediately. Serves as connection between anchor point and harness. Includes ergonomic cable handle and carabiner with fall indicator that shows when it has been used to arrest a fall. For vertical use. Can be maintained.
First aid kit suitable for all European countries, with special colour system and colour guide for faster and more efficient location, selection and use of first aid materials. The colour guide tells you which materials to use in which situation. You will also receive instructions on how to use them. Faster, more precise and better organised! Material Resc-Q-Box: ABS plastic case, impact-resistant and retains shape; temperature, dust and water resistant; maintenance-free with transparent cover plates, flexible hinges and robust closure. Includes: content in line with DIN13157, Resc-Q-Assist Colour System, colour guide, wall holder. Version: in line with Orange Cross contents. Dimensions: 320x220x130mm
Low shoe, extremely lightweight in velours S1, with ventilation openings. With a plastic 200J toecap. Lining in breathable textile and insole that is removable and moisture/shock absorbing. Sole in PU / PU. Available in 2 widths. Sizes: 35-43. Width measurements: 10, 11.
Super-light safety helmet for working at height, with short peak, made of strong ABS for improved low temperature (-40°) and side impact protection. With 6-point textile suspension (52-63 cm) and sweatband. Additional 4-point chinstrap harness, ideal for work at height when EN12492 standard is required. Optimised micro peak providing maximum upward visibility without compromising safety. Adjustment is made quickly and easily with convenient Twist2fit-ratchet. With extended neck protection and innovative ventilation system for improved airflow and wearer comfort. With convenient surface for personalisation. With European 30 mm slot for attachment of hearing and face protection. industry, contractors and installation companies. Colours: white, grey, blue, light blue, green, yellow, yellow HiViz, orange, orange HiViz, red, black.
Classic goggles with appropriate fit for each face. Lens in gray polycarbonate: like all uvex PC lenses offer the gray tinted lenses 100% protection against harmful UV radiation to 400 nanometers. The gray tint filter parts of the visible spectrum and it offers protection against intense glare of sunlight among others. The color signal recognition of color remains unhindered. Protects against reflections and optical irritations outdoors (e. g. water surfaces) for greater visual comfort. With anti-scratch coating coating.
Flame retardant and antistatic fleece in 50% Protex/32% cotton/16% polyester/2% negastat (AST) (350g/m²). Full zip closure, straight collar, 2 front pockets with zipper, elongated back. Available sizes: S- 3XL. Available colours: navy.
Inox scissors (20cm) for cutting fabric or paper. Does not cut in skin.
Bodytrousers in 65% cotton/35% polyester (290g/m²). Covered zipper with press-studs, 2 side pockets, 2 side slits, breast pocket with flap, pen pocket, handy pocket, back pocket with flap, ruler pocket with flexible steel ruler pocket, knee pockets, elasticated back and elasticated shoulders. Available sizes: 46-64. Available colours: navy, Cornflower blue.
Electrical insulating glove with mechanical resistance, which eliminates the need for wearing over-gloves. Protects against Arc Flash risks. Exterior in red, inside in black, outside has an anti-slip coating. Test voltage of 30,000 volts, operating voltage of 26,500 volts. Length 41 cm, Sizes: 7-12.
Lightweight parka in 100% polyester canvas with PU coating (160g/m²). Zip closure with stormflap on the inside, padded lining, removable hood, reflective piping, 4 exteriour pockets with waterproof zippers, 2 interiour pockets for cellphone, mp3,... and an id-badge, adjustable cuffs by velcro and windbreaker. Available sizes: XS-7XL. Available colours: navy, black, dark grey.
Oval carabiner made of aluminium Manual closure of the locking mechanism. Opening: 20 mm. Resistance: 25 kN. Weight: 92g.
Forest trousers with frontal protection type A, fly with zipper - closure with 1 button, 2 inset pockets, 1 patch pocket with zipper, 1 patch pocket for pleat and system for attaching the spark plug wrench, elastic waist with loops for belt and loops for suspenders with velcro. Quality: 65% polyester - 35% cotton lining 85 g / m². Available sizes: XS-4XL. Available colors: Grjis / black.
Cut and heat resistant arm protector 45 cm., with thumb opening and velcro.Ergonomic design. Protects during 21 seconds against 100°C contact heat (test report).
Multinorm RWS trousers with hidden zipper, 2 inset side pockets, back pocket with flap, ruler pocket with flap, thigh pocket with flap, pre-shaped easily accessible knee pockets with opening at the top lockable with flap and Velcro and length seam. Quality: 50% / 49% / 1% polyester / cotton / carbon + DWR, 295 gr / m2. Available colors: Fluo orange. Available sizes: Size range 44-66. Complies with: EN 1149, EN 13034, EN ISO 11611 class 1, EN ISO 20471 class 1, EN ISO 11612, IEC 61482 class 1.
Low shoe in waterproof leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breathable, waterresistant Gore-Tex liner. Outsole in PU/Nitril, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-51.
Jacket Shift with zipper, 1 chest pocket on the left with concealed press studs, sleeves with adjustable press studs, 2 inset side pockets with press stud fastening, reflective piping, D-ring, extended back. Quality: 65% / 35% polyester / cotton, 2/1 twill weave, 245 gr / m². Available colors: Charcoal gray, black / gray and navy / gray. Available sizes: S-4XL.
Comfortable, lightweight safety glasses made of synthetic material. Complete field of vision thanks to special curvature of the lens. Lens in grey polycarbonate with scratch resistant, anti-fog coating. Extra options: Tada glasses case. For light- or medium-duty mechanical work.
Multirisk trousers with concealed zip, 2 inset side pockets, 1 back pocket with flap, 2 thigh pockets with flap, knee pockets, elastic at the waist. Quality: 79% / 20% / 1% Kat / Poly / AS. Available sizes: 44-66 HAV. Available colors: Blue / gray, gray / yellow and black / gray. Conforms to: EN 1149-5, EN 11611 class 1 A1, EN 11612 A1 B1 C1, EN IEC 61482-2 class 1.
Low shoe in hydrofuged microfibre, with a non metallic antiperforation sole and synthetic 200J toecap. Fitted with a breathable liner in textile. Outsole in MONO-PU, SRC antislip. Whole insole which is conform to ESD. Sizes: 36-48.
Offshore work jacket Ramea with arc flash protection: Upright collar; Hidden popper fastening; 2 patched breast pockets with flaps; 2 patched side pockets with flaps; 2 loops for gas detectors; Sleeve narrowing by means of press studs; Extended back. Quality: 79% FR cotton + 20% PES + 1% AST; ± 260 g / m². Available sizes: 44-64 EU. Available colors: Navy. Conforms to: IEC 61482-2: 2009 class 1 - ATPV 9.4 cal / cm², EN ISO 11612: 2015 / A1 A2 B1 C1 E2 F1, EN ISO 14116: 2015, EN ISO 11611: 2015 / Class 1 - A1 A2, EN 1149-5: 2008 and EN 13034: type PB [6].
High shoe in microfibre/textile with a non metallic antiperforation sole and steel 200J toecap. BOA closing system. Fitted with a breathable, abrasion resistant liner in textile. Outsole in PU/PU Wellmaxx, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-42.
High safety shoe in microfiber with synthetic antiperforation sole and a synthetic toe cap. Outsole in MONO-PU, including ESD. Antislip SRC and choc resistant.
Multinorm ladies' softshell Heika with arc protection: Straight collar; Zip closure under flap; 2 inset pockets; 2 loops for gas detectors; Round sleeves; Sleeve narrowing; Elongated back tail; Flame retardant reflective segmented striping (50mm). Quality: 3-layer softshell: polyester fabric + breathable FR PU + inherent FR fleece + AST; ± 350 g/m². Available sizes: XS-2XL. Available colors: Fluo orange/navy and fluo yellow/navy. Compliant with: IEC 61482-2 : 2018 APC1 - ATPV 24,3 cal/cm², EN ISO 11612 : 2015 / A1 B1 C2 F1, EN ISO 14116 : 2015 / IND.3, EN ISO 11611 : 2015 / Class 2 - A1, EN 1149-5 : 2018, EN 13034 : 2005 + A1 : 2009 Type PB [6], EN ISO 20471 : 2013 +A1 2016 / Class 2 and EN 14058 : 2017 / Class 1 3 x x.
Chemical resistant glove for precision and medium duty work. Double dipped in a liquid-tight NBR/PVC mix. 35 cm long safety cuff. 18gg nylon liner for high fingertip sensitivity in difficult conditions. Sizes: 7-12. Complies with: EN388:2016 4.1.3.1.X, EN407: X.1.X.X.X.X, EN ISO 374-1:2016 Type A: JKLMNOPT, EN ISO 374-5:2016 Virus.
Durable unlined guide GTX synthetic leather work glove with impact protection for heavy duty work.
High shoe in waterrepellant full grain leather, with a synthetic antiperforation sole and composite 200J toecap. Fitted with a breat hable, abrasion resistant 3D liner in textile. UTURN closing system. Outsole in PU/Vibram, SRC antislip, oil and carburant resistant. Removable, polyurethane insole with textile layer. Sizes: 35-49.
Sweat band in black PU for helmet Pheos Alpine. Not certified seperatly as PPE.
Premium quality boot covers made of split cowhide leather. The strong material protects the feet and lower legs when welding and is designed to last in the toughest environments. Class 2 welding protection Designed with a comfort fit Designed to be worn in a tough work environment CE certified This product is sold in pairs UKCA marked Shell Fabric : Split Cowhide Leather, thickness 1.3 mm Available sizes: one size
Very thin nitrile glove (0.20mm) for maximum finger feeling, with grip pattern, unflocked, close fit. Protects against hazards such as aggressive acids, oils and strong detergents.
Cut resistant glove in special graphene fibers with double nitrile coating. These fibers provide heat regulation and keep the hands comfortable. Without glass and steel fibres.
Protective lens for the inside of Speedglas welding cassette 9100X, G5-01NC and G5-03NC. Not separately approved as PPE.
Automatic welding helmet from the G5-01 series in durable, lightweight material. Good protection of ears and side of neck, and better coverage of the throat against heat and welding sparks. Adjustable airflow distribution with three automatically darkening welding filters. Width of welding filter: 73x109mm. Battery life: 1500 hours.
Green FR coverall with elasticated wrists and hood suitable for use with helmets fitted with an elastic drawstring. Specially designed to provide extra protection against heat, flames and electrostatic hazards. The cotton in the fabric provides extra comfort while the PVC coating offers optimal chemical protection. Garment can be machine washed.
Firefighter boot with chainsaw protection (class 2) in black water and firerepellant PBI fabric and microfiber, with a synthetic ant iperforation sole and composite 200J toecap. Reflectors on both sides, AN ankle protection. Fitted with a Crosstech liner. Outsole in rubber with a confort layer in PU (embedded), SRC antislip, oil and carburant resistant. Pullstraps on front and back in PBI. Specially designed BOA closing system. Sizes: 35-50.
Goggle with panoramic view and ventilation, fits over most corrective glasses. With clear polycarbonate lens with anti scratch and antifog coating. Equipped with an adjustable elastic strap, so the soft mount properly to fits the face.
Red First aid pouch with basic first aid equipment for on-the-go. Content: quick bandage 7x10cm, wound quick bandage, adhesive plaster, wound plaster, Cambric bandage, elastic hydrophilic dressing, gauze pads 5/5cm, dressing wadding, splinter tweezers, pocket scissors, disinfectant wipes, safety pins, Burnshield blots. Dimensions: 22 x 14 cm.
6-points terylene suspension for 1125 helmet with slip adjustment.
Defender 13 is the ultimate protection against cutting risks and is particularly well suited for the food industry. Tricot gloves without seams, that are slightly thinner than Defender 10, made with Spectra® fibres in combination with polyester and stainless steel fibres. These gloves are ambidextrous and can be worn under chain mail gloves. Defender 13 is approved for use in the food industry. Available in: white/grey. Sizes: 7 / 8 / 9 / 10, 10 cm blue cuff for better detection.
Empty first aid kit box made of impact resistant ABS plastic. Domino(420 x 300 x 150 mm) for maximum 20 people.
Fire extinguisher. Fire action sign in polypropylene. Dimensions: 200x200mm.
Absorbent pads 41 cm x 51 cm. These heavy-weight perforated pads are packaged in a box. Packaged per 100 pieces. The wipes are made from 1-ply melt-spun polypropylene. This means they do not absorb water and can permanently float on water. Ideal for absorbing oil spills on land and water and for solvents, oil-based paint, vegetable oils and other water-insoluble chemicals. Absorption capacity: 114 litres.
Economical spill kit in a yellow PVC carry bag with handle. Easily fits behind or under the seat of a lorry. Ideal for transport fir ms that occasionally transport liquids. Content: 10 pads (41 x 51 cm), 2 socks (7.6 x 122 cm), 1 pair of gloves and 1 disposal bag. Absorption capacity: 16 litres.
Mobile yellow container for general areas. The chemical and water resistant container protects the content against dirt, moisture an d damage. Content: 50 pads (41 x 51 cm), 12 socks (7.6 x 122 cm), 6 pillows (43 x 48 cm), 1 pair of gloves, 2 pairs of safety glasse s, 3 disposal bags, 1 emergency response handbook. Absorption capacity: 128 litres. The absorption material in the spill kit is of U N quality.
Eye protection required. Mandatory sign in self-adhesive polyester. Diameter: 200mm.
Helmet clips for attachment of Petzl headlamps to safety helmet with thick edges. Keeps the headlamp’s elastic strap in place.
Brady safety label - Danger. Brady safety labels can be attached quickly and without additional tools. Due to the flexibility of the material, the label can be used at any location. The self-closing unit lets you attach any part of the device or machine. The perforations and notches in the tail of the label make it very easy to install (max. Ø 36 mm). Not PPE.
